当前位置:首页 >> 机械/仪表 >>

美国螺栓标准(ANSI bolt standards)


美国螺栓标准(ANSI bolt standards) 美国螺栓标准
ANSI | BS | DIN | EN | GB | | DIC
中文名称 架空线路架设用镀 锌铁制螺栓型带导 向螺纹的绝缘子柱 销

ISO

|

JIS |

NF

编号


英文名称 Insulator Pins with Lead Threads for Overhead Line Construction, Galvanized Ferrous Bolt-Type

ANSI C135.17-1988

ANSI/API Std.600-2001 ANSI/ASME B18.10-2006 ANSI/ASME B18.15-1985 ANSI/ASME B18.2.1-1996 ANSI/ASME B18.2.1a-1999

石油和天然气工业 Bolted Bonnet Steel Gate 用螺栓接合钢制帽 Valves for Petroleum and Natural Gas Industries 状阀门 轨道螺栓及螺母 Track Bolt and Nuts

锻造有眼螺栓

Forged Eyebolts

四方和六角形螺栓 Square and Hex Bolts and Screws (Inch Series) 和螺钉(英寸系列) 四方和六角形螺栓 Square and Hex Bolts and Screws (Inch Series) 和螺钉(英制系列)

ANSI/ASME 四方头螺栓(米制系 Square Head Bolts (Metric B18.2.3.10M-1996 列) Series) ANSI/ASME B18.2.3.5M-1979 ANSI/ASME B18.2.3.6M-1979 ANSI/ASME B18.2.3.7M-1979 ANSI/ASME B18.2.8-1999 ANSI/ASME B18.2.9-2007 米制六角形螺栓 Bolts, Metric Hex

米制重六角形螺栓

Bolts, Metric Heavy Hex

米制重六角形结构 Bolts, Metric Heavy Hex Structural 螺栓 螺栓、 螺钉和螺柱的 Clearance Holes for Bolts, Screws and Studs 通孔 Straightness Gage 螺栓和螺钉用平直 Gaging for Bolts 度量规和精确计量 Screws and and

ANSI/ASME B18.5-1990 ANSI/ASME B18.5.2.1M-2006 ANSI/ASME B18.5.2.2M-1982 ANSI/ASME B18.5.2.3M-1990 ANSI/ASME B18.9-2007 ANSI/ASME B5.1M-1985 ANSI/ASME PCC-1-2005

圆 头 螺 栓 ( 英 寸 系 Round Head Bolts (Inch Series) 列) 米制园头短方颈杆 Metric Round Head Short Square Neck Bolts 的螺栓 米制圆头方颈螺栓 Bolts, Metric Round Head Square Neck

Round Head Square Neck 米制大圆头方颈螺 Bolts With Large Head 栓 (Metric) 防松螺栓 Plow Bolts

T 型槽.T 型槽螺栓、 T-Slots - Their Bolts, Nuts, and Tongues 螺母和榫舌 压力限制螺栓连接 Guidelines for Pressure 法兰联轴节组件的 Boundary Bolted Flange Joint Assembly 导则 Specification for 高温设备用合金钢 Alloy-Steel and Stainless 和不锈钢螺栓材料 Steel Bolting Materials for 规范 High-Temperature Service Specification for Carbon 高压和高温设备用 and Alloy Steel Nuts for 碳素钢与合金钢螺 Bolts for High-Pressure and High-Temperature 栓和螺母规范 Service Specification for Bolting 低温设备用合金钢 Alloy-Steel Materials for 螺栓材料规范 Low-Temperature Service Specification for Manhole 半埋入式防油、防 Cover Assembly, Bolted, 水、 螺栓连接人孔盖 Semi-Flush, Oiltight and 组件规范 Watertight 半埋入式防油、 防水 Specification for Manhole 螺栓连接的人孔盖 Cover Assembly, Bolted, Hinged, Semi-Flush, 组件规范

ANSI/ASTM A193/A 193M-2001

ANSI/ASTM A194/A 194M-2001

ANSI/ASTM A320/A 320M-2001

ANSI/ASTM F1142-1990

ANSI/ASTM F1144-1990

Oiltight and Watertight Practice for Inspection 螺栓螺纹锁定厌氧 Procedure for Use of 复合物检验程序惯 Anaerobic Thread Locking 例 Compounds with Studs 管道系统法兰接头 Practice for Selecting 用螺栓长度的选用 Bolting Lengths for Piping System Flanged Joints 惯例 Water 储水用加工涂覆螺 Factory-Coated 栓连接钢罐 Steel Tanks for Storage, Bolted

ANSI/ASTM F1179-1997

ANSI/ASTM F704-1997

ANSI/AWWA D103-1997

ANSI/IEEE C135.1-1999

Standard for Zinc-Coated 架空线结构用镀锌 Steel Bolts and Nuts for Overhead Line 钢螺栓和螺母标准 Construction 普通螺栓、 螺钉和双 Surface Discontinuities on 头螺栓的表面不均 General Application Bolts, Screws, and Studs 匀性 Surface Discontinuities on 螺栓、螺纹、螺母表 Bolts, Screws, and Studs in 面断续疲劳试验 Fatigue Applications 紧固件.零件标准帽 Fasteners - Part Standard 螺钉、 六角头螺栓和 Cap Screws, Hex Bolts, and Hex Nuts 六角螺母 建筑和工业机械用 Bolt and Capscrew Sizes 螺栓和有头螺钉尺 for Use in Construction and Industrial Machinery 寸 Holes in Bolt and Screw 扁销用螺栓孔与螺 Shanks and Slots in Nuts 母螺杆尾和槽 for Cotter Pins Hydraulic Flanged Tube, 四螺栓拼合法兰型 Pipe, and Hose 液压法兰管、 管道及 Connections, Four-Bolt 软管接头 Split Flange Type 制动衬片铆钉和制 Rivets for Brake Linings and Bolts for Brake Blocks 动块螺栓

ANSI/SAE J1061-1992

ANSI/SAE J123-1994

ANSI/SAE J2295-1998

ANSI/SAE J370-1998

ANSI/SAE J485-1998

ANSI/SAE J518-1993

ANSI/SAE J663-1994

方头和六角头螺栓 ASME B 18.2.1 和螺钉(英寸系列). Erratum-2003 对 ASME B 18.2.1-1996 的勘误 ASME B18.10-1982 ASME B18.2.1-1996 道轨用螺栓和螺母

(Square and hex bolts and screws (Inch series); Erratum to ASME B18.2.1-1996) (Track bolts and nuts)

英制方头和六角头 (Square and hex bolts and 螺栓和螺钉(英制系 screws (Inch series)) 列)

方头和六角头螺栓 (Square and hex bolts and ASME B18.2.1a (inch series); 和螺钉(英制系列). screws Addenda-1999 Addenda) 附录 ASME B18.2.3.5M Errata-1981 ASME B18.2.3.5M-1979 ASME B18.2.3.6M Errata-1981 ASME B18.2.3.6M-1979 ASME B18.2.3.7M Errata-1981 ASME B18.2.3.7M-1979 ASME B18.5-1990 ASME B18.5.2.1M Erratum-2003 ASME B18.5.2.1M-1996 ASME 米制六角头螺栓,正 (Metric hex bolts; Errata) 误表

米制六角头螺栓

(Metric hex bolts)

米制重型六角头螺 (Metric heavy hex bolts; Errata) 栓,正误表 米制重型六角头螺 (Metric heavy hex bolts) 栓 heavy hex 米制重型六角头结 (Metric structural bolts; Errata) 构螺栓,正误表 heavy 米制加重六角头结 (Metric structural bolts) 构螺栓 英制圆头螺栓 hex

(Round head bolts (Inch series))

米制圆头短方颈螺 (Metric round head short square neck bolts; Erratum) 栓.技术勘误 米制圆头短方颈螺 (Metric round head short square neck bolts) 栓 米制圆头方颈螺栓 (Metric round head square

B18.5.2.2M-1982 ASME B18.5.2.3M-1990 ASME B18.9-1996 ASME B5.1M-1985 ASME PCC-1-2000

neck bolts) (Round head square neck 带大头的米制圆头 bolts with large head 方颈螺栓 (Metric series)) 防松螺栓(英制系 (Plow bolts (inch series)) 列) T 型槽及其螺栓.螺 (T-slots, their bolts, nuts, and tongues) 母和榫舌 (Guidelines for pressure 压力边界螺栓法兰 boundary bolted flange 连接组件导则 joint assembly)

Standard Specification for 高温设备用沉淀硬 Precipitation-Hardening ASTM A 1014/A 化 螺 栓 材 料 (UNS Bolting Material (UNS 1014M-2006 for High N07718)的标准规范 N07718) Temperature Service ASTM 183-2003 Standard Specification for A 碳素钢制轨条螺栓 Carbon Steel Track Bolts 和螺母的标准规范 and Nuts Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications

高温或高压设备及 其他特殊用途的合 ASTM A 193/A 金钢和不锈钢螺栓 193M-2007 连接材料用标准规 范

Standard Specification for 高压或高温设备或 Carbon and Alloy Steel ASTM A 194/A 高压高温设备的螺 Nuts for Bolts for High 194Ma-2007 or High 栓用碳素钢与合金 Pressure Temperature Service, or 钢螺母的标准规范 Both 抗 拉 强 度 为 A 60000PSI 的碳素钢 螺栓和柱头螺栓用 标准规范 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength

ASTM 307a-2007

ASTM A 320/A 低温设备用合金钢 Standard Specification for

320Ma-2007

和不锈钢螺栓材料 Alloy-Steel and Stainless Steel Bolting Materials for 的标准规范 Low-Temperature Service 最小抗拉强度为 A 120/105ksi 的热处理 钢结构螺栓的标准 规范 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

ASTM 325-2007

ASTM 325M-2005

Standard Specification for 最小抗拉强度为 Structural Bolts, Steel, A 830Mpa 的热处理钢 Heat Treated 830 MPa 结构螺栓标准规范 Minimum Tensile Strength (米制) [Metric] Standard Specification for 淬火和回火合金钢 Quenched and Tempered A 螺栓、 螺柱和其它外 Alloy Steel Bolts, Studs, 螺纹紧固件的标准 and Other Externally 规范 Threaded Fasteners Standard Specification for 钢制输电塔镀锌螺 A Steel Transmission Tower 栓和裸螺栓用标准 Bolts, Zinc-Coated and 规范 Bare

ASTM 354-2007

ASTM 394-2007

Standard Specification for 高温用经特殊处理 Alloy-Steel Turbine-Type ASTM A 437/A 的渦轮型合金钢螺 Bolting Material Specially 437M-2006 Heat Treated for 栓材料标准规范 High-Temperature Service 通用最低拉伸强度 为 120/105/90ksi 的 A 热处理钢制六角头 螺钉、 螺栓和螺柱用 标准规范 Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

ASTM 449a-2007

Standard Specification for 具有同奥氏体不锈 High-Temperature Bolting ASTM A 453/A 钢相似的膨胀系数 Materials, with Expansion 453M-2004 的耐高温螺栓材料 Coefficients Comparable to 用标准规范 Austenitic Stainless Steels ASTM A 最 小 抗 拉 强 度 为 Standard Specification for

490-2006

150ksi 的热处理合 Structural Bolts, Alloy 金钢结构螺栓标准 Steel, Heat Treated, 150 ksi Minimum Tensile Strength 规范 Standard Specification for 结构钢接头用 10.9 High-Strength Steel Bolts, A 和 10.9.3 级高强度 Classes 10.9 and 10.9.3, 钢螺栓(米制)标准 for Structural Steel Joints 规范 [Metric]

ASTM 490Ma-2004

Standard Specification for ASTM A 540/A 特殊用合金钢螺栓 Alloy-Steel Bolting 540M-2006 Materials for Special 材料的标准规范 Applications Standard Test Methods for 木和木基制品中螺 Bolted Connections in 栓连接的标准试验 Wood and Wood-Base 方法 Products

ASTM 5652-1995

D

ASTM 1142-1998

Standard Specification for 防油防水半嵌入螺 F Manhole Cover Assembly 栓连接检查孔盖组 Bolted, Semi-Flush, 件标准规范 Oiltight and Watertight Standard Specification for 防油防水隆起的螺 F Manhole Cover Assembly, 栓连接检查孔盖组 Bolted, Raised, Oiltight 件标准规范 and Watertight Standard Specification for 防油防水半嵌入螺 Manhole Cover Assembly, F Semi-Flush, 栓铰接检查孔盖组 Bolted, Oiltight and Watertight, 件 Hinged Inspection Procedure for 螺栓螺纹锁定厌氧 F Use of Anaerobic Thread 复合物使用的检验 Locking Compounds with 程序 Studs F 屈服应力为 36、55 Standard Specification for 和 105ksi 的钢制锚 Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength 固螺栓用标准规范

ASTM 1143-1998

ASTM 1144-1998

ASTM 1179-1988

ASTM 1554-2007 ASTM

F 120/105KSI 最小抗 Standard Specification for

1852-2005

张强度的热处理钢 制 "拧 松式 "张 力控 制结构螺栓/螺母/垫 圈配件的标准规范

"Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

ASTM 2280-2006

Standard Specification for 150ksi 最低拉伸强 "Twist Off" Type Tension Structural 度的热螺纹钢制"扭 Control F 开"型拉伸控制结构 Bolt/Nut/Washer 螺栓/螺母/衬垫组件 Assemblies, Steel, Heat Treated, 150 ksi Minimum 的标准规范 Tensile Strength Standard Specification for 耐热及高温设备用 Stainless Steel and Nickel F 不锈钢和镍合金螺 Alloy Bolts, Hex Cap 栓、 六角头螺钉和螺 Screws, and Studs, for Heat Resistance and High 柱的标准规范 Temperature Applications Standard Test Method for Determining 淬火和回火的螺纹 Decarburization and F 钢螺栓、 螺母和螺柱 Carburization in Hardened 的脱碳和渗碳性测 and Tempered Threaded 定的标准试验方法 Steel Bolts, Screws and Studs Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs [Metric] Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners

ASTM 2281-2004

ASTM 2328-2005

ASTM 2328M-2007

淬火和回火的螺纹 钢螺栓、 螺钉和螺柱 F 的脱碳和渗碳性测 定的标准试验方法 (米制)

ASTM 2329-2005

碳钢和合金钢螺栓、 螺钉、垫圈、螺母和 F 特殊螺纹紧固件用 热浸镀锌覆层的标 准规范

ASTM 2437-2006

与螺旋帽、螺栓、锚 和螺柱用碳和合金 F 钢可压缩垫圈式直 读张力指示器的标 准规范

Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs

ASTM 468-2006

Standard Specification for 一般用途有色金属 F Nonferrous Bolts, Hex Cap 螺栓、 六角头螺钉及 Screws, and Studs for 螺柱标准规范 General Use 一般用途有色金属 F 螺栓、 六角头螺钉及 螺柱标准规范(米 制) Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]

ASTM 468M-2006

ASTM 541-2004 ASTM 593-2002

F 合金钢有眼螺栓的 Standard Specification for Alloy Steel Eyebolts 标准规范 F 不锈钢螺栓,六角头 Standard Specification for 螺钉及螺柱标准规 Stainless Steel Bolts, Hex Cap Screws, and Studs 范

ASTM 704-1981

Standard Practice for 管道系统法兰接头 F Selecting Bolting Lengths 用螺栓长度选择的 for Piping System Flanged 标准实施规程 Joints F 不锈钢米制螺栓、 螺 Standard Specification for 钉 及 螺 柱 ( 米 制 ) 的 Stainless Steel Metric Bolts, Screws, and Studs 标准规范 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series

ASTM 738M-2002

英制及米制系列的 ASTM F 788/F 螺栓、 螺钉及螺柱的 788M-2006 表面不均匀性的标 准规范 ASTM 901-1997

Standard Specification for F 铝制传输塔用螺栓 Aluminum Transmission 及螺母 Tower Bolts and Nuts Standard Practice for G 大气电流腐蚀用绕 Conducting Wire-on-Bolt Test for Atmospheric 线螺栓试验 Galvanic Corrosion

ASTM 116-1999

IEEE 135.1-1999 编号

(Zinc-coated steel bolts and C 架空线结构用镀锌 nuts for overhead line 钢螺栓和螺母 construction) 中文名称 英文名称

返回


相关文章:
美国电池标准(ANSI battery standards)_图文
美国电池标准(ANSI battery standards)_信息与通信_工程科技_专业资料。主要介绍了美国的电池标准信息,请注意电池的类别是否适用和更改。...
美国电缆标准(ANSI cable standards)
美国电缆标准(ANSI 美国电缆标准(ANSI cable standards) 编号 中文名称 英文名称 Entertainment Technology Configuration Standard for Metal-Halide Ballast Power Cables...
日本螺栓标准141110
日本螺栓标准(JIS bolt standards) 编号 中文名称 日本語標題 射钉枪用销钉和柱螺栓 発射打込みびょう 建筑物用松紧螺套螺栓 英文名称 JIS A5529-1995 Pins ...
美国国家标准学会ANSI简介
美国国家标准学会ANSI简介,包括创建时间、主要组成机构、主要职责等美国国家标准学会...Accreditation by ANSI signifies that the procedures used by the standards ...
螺栓标准
(1)、HEX MACHINE BOLT :无华司、有束尾、半牙六角螺栓, (2)、HEX TAP ...参照标准:英制自攻钉参照标准ANSI/ASME B18.6.4,公制的参照标准有 GB845 ...
美国管道标准代码解释(自)
美国管道标准代码解释 1.标准制定组织 ANSI AMERICAN NATIONAL STANDARDS INSTITUTE...(用于缠绕式垫片) STUD STUD BOLT /双头螺柱 HEX.NUT六角螺帽 T THICKNESS /...
螺栓标准,螺栓尺寸标准
(inch) ,相当于我国旧制的市寸,在美国、英国等...半牙六角螺栓, (2) 、HEX TAP BOLT:无华司、无...参照标准: 英制自攻钉参照标准ANSI/ASME B18.6...
螺栓强度等级
(inch),相 当于我国旧制的市寸,在美国、英国等...英制螺栓参照标准ANSI/ASME B18.2.1,日标参照...(1) HEX MACHINE BOLT: 、 无华司、 有束尾、...
螺丝规格表_图文
(1)、HEX MACHINE BOLT:无华司、有束尾、半牙...英制螺栓参照标准ANSI/ASME B18.2.1,日标参照...美国 规格 铁板 螺丝 B 号称 最大 牙数最小 ...
螺丝英文表示意思
(American National Standards Institute – ANSI;...bolt 吊环螺栓(也叫环首螺栓, 其实这个叫法很多,...标准螺纹 UN 恒定螺距系列的统一螺纹 美国标准 ANSI...
更多相关标签:
u bolt 标准 | 标准信息 standards | ansi标准 | ansi b16.5法兰标准 | ansi法兰标准 | ansi c标准 | ansi是什么标准 | ansi 150lb法兰标准 |