阻燃、防火测试标准 美国 UL 阻燃、防火测试标准
UL 9：窗户组件燃烧测试的安全标准(同 ASTM E 163) UL 9：Standard for Fire Tests of Window Assemblies Abstract 摘要 These methods of fire tests are applicable to window assemb
lies, including glass block and other light transmitting assemblies, for use in the protection of openings in vertical fire resistive assemblies. UL 10B：房门附件的防火测试标准(同 AS'TM E 152) UL 10B：Standard for Fire Tests of Door Assemblies Abstract 摘要 These methods of fire tests are applicable to door assemblies of various materials and types of construction for use in wall openings to retard the passage of fire. Tests made in conformity with these test methods register performance during the test exposure; and such tests shall not be construed as determining compliance for use after exposure to fire. It is the intent that tests made in conformity with these test methods develop data to enable regulatory bodies to determine the compliance of door assemblies for use in locations where fire resistance of a specified duration is required. These methods are intended to evaluate the ability of a door assembly to remain in an opening during a predetermined test exposure. UL 44：热绝缘线和电缆 UL 44：Thermo set-Insulated Wires and Cables Abstract 摘要 This Standard specifies the requirements for single-conductor and multiple-conductor thermoset-insulated wires and cables rated 600 V, 1000 V, 2000 V, and 5000 V, for use in accordance with the rules of the Canadian Electrical Code (CEC), Part 1, CSA C22.1, in Canada, Standard for Electrical Installations, NOM-001-SEDE, in Mexico, and the National Electrical Code (NEC), NFPA-70, in the United States of America.See Annex a for the complete list of types covered by this Standard and the specific electrical codes for which they are intended, and Annex b for a summary of construction and test requirements for these types. UL 83：热塑绝缘电线和电缆 UL 83：Thermoplastic-Insulated Wires and Cables Abstract 摘要
This Standard also specifies the requirements for submersible-pump cables, with or without jackets. No type-letter designations are assigned to these cables. UL 94：设备和器具部件用塑料材料易燃性的测试 UL 94：Standard for Tests for Flammability of Plastic Materials for Parts in Devices and Appliances Abstract 摘要 These requirements cover tests for flammability of polymeric materials used for parts in devices and appliances. They are intended to serve as a preliminary indication of their acceptability with respect to flammability for a particular application. The methods described in this Standard involve standard size specimens and are intended to be used solely to measure and describe the flammability properties of materials, used in devices and appliances, in response to a small open flame or radiant heat source under controlled laboratory conditions. UL 94 HB：塑料水平燃烧测试 UL 94 HB：Horizontal Burning Plastics Test Abstract 摘要 ASTM D 635, Test Method for Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position (IEC 707, Methods of Test for the Determination of the Flammability of Solid Electrical Insulating Materials When Exposed to an Igniting Source, ISO 1210, Plastics – Determination of the Burning Behavior of Horizontal and Vertical Specimens in Contact with a Small Flame Ignition Source) UL 94 HBF：HF-1，HF-2 泡沫塑料水平燃烧测试 UL 94 HBF：Horizontal Burning foam Test for Classifying Materials HBF, HF-1, or HF-2 Abstract 摘要 ASTM D 4986, Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials (ISO/DIS 9772.3, Cellular Plastics – Determination of Horizontal Burning Characteristics of Small Specimens Subjected to a Small Flame) UL 94 V：塑料垂直燃烧性测定 UL 94 V：Vertical Burning plastics Test Abstract 摘要 ASTM D 3801, Method for Measuring the Comparative Extinguishing Characteristics of Solid Plastics in a Vertical Position (IEC 707, ISO 1210) UL 94 5V：塑料垂直燃烧测试 UL 94 5V：Vertical Burning plastics Test, 5VA or 5VB
Abstract 摘要 ASTM D 5048, Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125 mm Flame (ISO 10351, Plastics – Method of Test for the Determination of Combustibility of Specimens Using a 125 mm Flame Source)
UL 94 VTM：塑料薄膜垂直燃烧测试 UL 94 VTM：Thin Material Vertical Burning Test Abstract 摘要 ASTM D 4804, Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics (ISO 9773, Plastics – Determination of Burning Behavior of Flexible Vertical Specimens in Contact with a Small Flame Ignition Source) UL 181：厂制通风管和连接器 UL 181：Standard for Factory-Made Air Ducts and Air Connectors Abstract 摘要 These requirements apply to materials for the fabrication of air duct and air connector systems for use in accordance with the International Mechanical Code (IMC), International Residential Code (IRC), and Uniform Mechanical Code (IMC), Standards of the National Fire Protection Association for the Installation of Air-Conditioning and Ventilating Systems, NFPA No. 90A, and the Installation of Warm Air Heating and Air-Conditioning Systems, NFPA No. 90B. UL 214：织物和胶片的火焰蔓延测试 UL 214：Tests for Flame Propagation of Fabrics and Films UL 263：建筑结构和材料的防火测试标准(同 ASTM E 119) UL 263：Standard for Fire Tests of Building Construction and Materials Abstract 摘要 These fire tests are applicable to assemblies of masonry units and to composite assemblies of structural materials for buildings, including bearing and other walls and partitions, columns, girders, beams, slabs, and composite slab and beam assemblies for floors and roofs. They are also applicable to other assemblies and structural units that constitute permanent integral parts of a finished building. UL 580：屋面附件的抗风掀动阻力的测试 UL 580：Standard for Tests for Uplift Resistance of Roof Assemblies
Abstract 摘要 The method of test specified in this standard is intended to determine the uplift resistance of roof assemblies consisting of the roof deck and roof covering materials. It is applicable to any type of roof assembly which is adaptable to the test equipment. Tests to evaluate other potential hazards of roof assemblies are not within the scope of these requirements. UL 723：筑材料表面燃烧特性的测试标准(同 ASTM E 84) UL 723：Standard for Test for Surface Burning Characteristics of Building Materials Abstract 摘要 This method of test for surface burning characteristics of building materials is applicable to any type of building material that, by its own structural quality or the manner in which it is applied, is capable of supporting itself in position or being supported in the test furnace to a thickness comparable to its intended use. UL 746A：聚合材料.短期特性评价 UL 746A：Standard for Polymeric Materials - Short Term Property Evaluations Abstract 摘要 These requirements cover short-term test procedures to be used for the evaluation of materials used for parts intended for specific applications in electrical end products. Together with the requirements mentioned in Supplementary Test Procedures, Section 4, these investigations provide data with respect to the physical, electrical, flammability, thermal, and other properties of the materials under consideration and are intended to provide guidance for the material manufacturer, the molder, the end-product manufacturer, safety engineers, and other interested parties. A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire or of electric shock or injury to persons shall be evaluated using appropriate additional component and end-product requirements to maintain the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard does not comply with this standard. Revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard. UL 746B：聚合材料.持久性能评估 UL 746B：Standard for Polymeric Materials - Long Term Property Evaluations Abstract 摘要 These requirements cover long-term test procedures to be used for the evaluation of materials used for parts intended for specific applications in end products.
Together with the Standards mentioned in Supplementary Test Procedures, Section 3, these investigations provide data with respect to the physical, electrical, flammability, thermal, and other properties of the materials under consideration and are intended to provide guidance for the material manufacturer, the molder, the end-product manufacturer, safety engineers, and other interested parties. A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire or of electric shock or injury to persons shall be evaluated using appropriate additional component and end-product requirements to maintain the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard does not comply with this standard. Revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.
UL 746C：电气设备评定用聚合材料 UL 746C：Standard for Polymeric Materials - Use in Electrical Equipment Evaluations Abstract 摘要 These requirements cover parts made of polymeric materials that are used in electrical equipment and describe the various test procedures and their use in the testing of such parts and equipment. These requirements do not cover the specific insulating systems that are covered by the requirements contained in the Standard for Systems of Insulating Materials, General, UL 1446. Test procedures are provided herein for the evaluation of polymeric materials in specific applications. These test procedures include references to data obtained from small-scale property tests conducted under standard conditions as well as other practical means of evaluation. UL 746D：聚合材料.成品零件 UL 746D：Standard for Polymeric Materials - Fabricated Parts Abstract 摘要 These requirements cover a program applicable to parts that have been molded or fabricated from polymeric material and describe the material-identity control system intended to provide traceability of the material used for the polymeric parts through the handling, molding or fabrication, and shipping operations. Guidelines are also provided for acceptable blending or simple compounding operations that may affect risk of fire, electrical shock, or injury to persons.
UL 746E：聚合材料.印制线路板用工业层压板、丝绕管件、硫化纤维和材料 UL 746E： Standard for Polymeric Materials - Industrial Laminates, Filament Wound Tubing, Vulcanized Fibre, and Materials Used In Printed-Wiring Boards Abstract 摘要 These requirements cover test procedures to be used for the evaluation of industrial laminates, filament wound tubing, vulcanized fibre, and materials for use in fabricating printed wiring boards. These requirements provide data with respect to the physical, electrical, flammability, thermal, and other properties of the materials, that are intended to provide guidance to the material manufacturer, the fabricator, the end product manufacturer, safety engineers and other interested parties. UL 790：屋面覆盖材料耐火性的测试(同 ASTM E 108) UL 790：Standard for Standard Test Methods for Fire Tests of Roof Coverings Abstract 摘要 These requirements cover the fire resistance performance of roof coverings exposed to simulated fire sources originating from outside a building on which the coverings are installed. They are applicable to roof coverings intended for installation on either combustible or noncombustible decks when the roof coverings are applied as intended. UL 910：通气空间中电缆和光缆的火和烟特性的测试方法 UL 910：Test Method for Fire and Smoke Characteristics of Electrical and Optical-Fiber Cables Used in Air Handling Spaces UL 1040：绝缘墙体结构的防火测试 UL 1040：Standard for Fire Test of Insulated Wall Construction Abstract 摘要 This test method describes the testing procedures and requirements applicable to insulated wall constructions by use of a standardized large-scale corner test. The purpose of this test method is to determine the ability of field or prefabricated insulated wall panels to resist the spread-of-flame over a simulated interior wall surface of a building and the ability of the insulating material to resist damage as a result of the fire exposure. This test method is not intended to evaluate the fire resistance afforded by the structural members of the test structure such as columns, beams, girders, bar joists, tie bars, and the like. UL 1056：装饰家具防火测试 UL 1056：Fire Test of Upholstered Furniture UL 1256：屋顶板结构的防火测试
UL 1256：Standard for Fire Test of Roof Deck Constructions Abstract 摘要 These requirements cover fire test methods to evaluate the performance of metallic and nonmetallic roof deck constructions subjected to internal (under deck) fire exposures for the purpose of determining the contribution of the roof covering material, insulation, and other components of the roofing system to the spread of fire within a building. As the extent of flame propagation, thermal degradation, and combustive damage are determined after roof deck constructions are exposed to controlled fire conditions, these requirements are not intended for use in describing or defining the fire hazard or risk of fire under actual fire conditions. UL 1581：电线、电缆和软线的参考标准 UL 1581：Reference Standard for Electrical Wires, Cables, and Flexible Cords Abstract 摘要 This standard contains specific details of the conductors, of the insulation, of the jackets and other coverings, and of the methods of sample preparation, of specimen selection and conditioning, and of measurement and calculation that are required in wire and cable standards. The requirements for the particular materials, construction, performance, and marking of an individual type of wire, cable, or flexible cord are stated in the standard covering the finished type. They are not part of this reference standard. In each case in which an element of this standard does not apply, the standard covering the finished type so states and specifies what does apply. UL 1666：电缆和光缆垂直安装在竖井中时火焰蔓延高度的测试 UL 1666：Standard for Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts Abstract 摘要 This is a fire test for determining values of flame propagation height for electrical and optical-fiber cables that are for installation vertically in shafts or in vertical runs that penetrate more than one floor. The purpose of this test is to determine whether the flame propagation characteristics of these "riser" cables are in accordance with the National Electrical Code. This test does not investigate the toxicity or corrosivity of the products of combustion or decomposition. This test does not cover the construction requirements for any cable or the electrical, optical, and other performance requirements for any cable.
UL 1685：电缆和光缆于垂直槽中的火焰传播和烟雾排放测试 UL 1685：Standard for Vertical-Tray Fire-Propagation and Smoke-Release Test for Electrical and Optical-Fiber Cables Abstract 摘要 The UL flame exposure is a vertical-tray fire test for determining values of cable damage height and smoke release from electrical and optical-fiber cables when the cables are subjected to a flaming ignition source. For a cable to be acceptable under the UL test procedure, each of the following is to be exhibited UL 1694：小型聚合合成材料可燃性测试 UL 1694：Standard for Tests for Flammability of Small Polymeric Component Materials Abstract 摘要 These requirements specify a needle-flame test to simulate the effect of small flames which may result from fault conditions within equipment in order to assess the fire hazard by a simulation technique. This test is applicable to small components which contain materials that can not be fabricated into standardized specimens in the minimum use thickness and subjected to applicable preselection tests, such as UL 94. Test procedures specified have been determined to be applicable to small components with an overall volume of less than 2500 mm3 (0.15 in3). Test procedures may not be applicable to small components with an overall volume greater than 2500 mm3 (0.15 in3).Test results may vary between small components which are similar in construction. Consideration should be given to the individual component construction to determine the suitability of extending results obtained for one component to other similar components. UL 1715：内部精整材料的防火测试 UL 1715：Standard for Fire Test of Interior Finish Material Abstract 摘要 This test method describes the testing procedures and requirements applicable to the classification of interior finish material assemblies by use of a standardized room fire exposure. This test method is intended for use in the evaluation of the flammability contribution of wall material assemblies, ceiling material assemblies, or both, exposed to early fire growth under specified room fire exposure conditions. The effectiveness of fire barrier materials as protection for other combustible materials or components within the assembly is of primary interest for this evaluation. UL 1820：压缩空气管耐火焰和烟雾性能的防火测试 UL 1820：Standard for Fire Test of Pneumatic Tubing for Flame and Smoke Characteristics
Abstract 摘要 This is a test method for determining values of flame propagation distance and optical smoke density for pneumatic tubing that is to be installed in ducts, plenums, and other spaces used for environmental air. The purpose of this test method is to determine whether the flame-propagation and smoke-generating characteristics of these tubes are in accordance with the provisions of Installation of Air Conditioning and Ventilating Systems, NFPA 90A. Exception No. 3 of Section 2-2.1.2 of NFPA 90A states that pneumatic tubing having the required fire-resistant and low-smoke-producing characteristics are capable of being installed in the space between the ceiling and the floor or roof above, used as an air handling plenum. UL 1821：消防设备用热塑喷水器的管及其配件 UL 1821：Standard for Safety for Thermoplastic Sprinkler Pipe and Fittings for Fire Protection Service Abstract 摘要 These requirements cover thermoplastic pipe and fittings for use in wet pipe sprinkler systems for fire protection service UL 1853：一次性易燃的和可燃液体用塑料容器 UL 1853：Standard for Noreusable Plastic Containers for Flammable and Combustible Liquids Abstract 摘要 These requirements cover nonreusable plastic containers in sizes up to 5 gallons (19 L) intended for storage of flammable and combustible liquids in accordance with the Flammable and Combustible Liquids Code, NFPA 30, except that containers for Class IA flammable liquids shall not exceed 1 gallon (3.8 L). UL 1887：塑料喷水管的可见火焰和烟雾性能的防火测试 UL 1887：Standard for Fire Test of Plastic Sprinkler Pipe for Visible Flame and Smoke Characteristics Abstract 摘要 This is a test method for determining values of flame propagation distance and optical smoke density for plastic sprinkler pipe that is to be installed in ducts, plenums, and other spaces used for environmental air. This test method does not cover the construction requirements for sprinkler pipe for pressure or other performance requirements. UL 1895：床垫防火测试 UL 1895：Standard for Safety for Fire Test of Mattresses;
UL 1897：屋面系统的上升测试 UL 1897：Standard for Uplift Tests for Roof Covering Systems Abstract 摘要 This test method provides a comparative measure of the uplift resistance for roofing systems by means of static differential pressure. The method does not necessarily simulate the actual dynamic uplift pressures encountered by roofing systems. Uplift pressures on a roofing system are dependent upon many factors such as wind gusts, building shape, edge configuration, and the terrain surrounding the building. A method to calculate the uplift pressures on roof assemblies is contained in the Standard for Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers, ANSI/ASCE 7. UL 1975：装饰用泡沫材料防火测试 UL 1975：Standard for Fire Tests for Foamed Plastics Used for Decorative Purposes Abstract 摘要 The purpose of this test method is to determine the ability of foamed plastics and products containing foamed plastics used for decorative purposes to resist rapid heat release when subjected to a flaming ignition source. UL 2043：空气处理场所使用的个别分离性产品及其附件热和可见烟雾释放的防火测试 UL 2043： Standard for Fire Test for Heat and Visible Smoke Release for Discrete Products and Their Accessories Installed in Air-Handling Spaces Abstract 摘要 This is a fire test method for determining the fire performance response of discrete products (including, but not limited to electrical equipment) intended to be installed in air handling spaces, such as above suspended ceilings or below floors. These products are subjected to an open flame ignition source and evaluated using a product calorimeter. UL 2060：使用家具量热器对带床上用品床垫的防火测试 UL 2060：Fire test of mattresses with bedclothes using a furniture calorimeter