当前位置:首页 >> 能源/化工 >>

国外先进地暖技术


Floor Systems Price List
HYDRONICS

Ver sa Therm

?

snap-fit floor system

Q uick Therm

?

radiant installation panels


Effe c tive D ate

May 01, 2009

Floor Systems

1-866-752-2055 Fax 1-866-752-2054

www.legendhydronics.com

Ver sa Therm Q

?

snap-fit floor system
Replacement tUBe Shield (VT-RTS)

Replacement RetURn panel haRdwaRe (VT-RPH) Replacement RetURn panel cOVeR (VT-RRc)

The innovative VersaTherm? floor system is unlike any dry radiant system on the market. The panels snap together in minutes saving significant labor costs. Basement and 2nd floor retrofits are easy because the panels are pre-insulated and naturally water resistant. The use of 1/2” pipe allows for greater circuit lengths and is 100% protected by metal, unlike many other dry systems. Thus the entire surface transfers heat, reducing temperature stratification common in some systems. The panels are only 3/4” thick, minimizing construction problems common in over-pour installations. ? Labor Saving – snaps together ? 1/2" pipe – for longer circuit lengths ? Tubing is protected against damage ? Panels are pre-insulated – great for retrofits and basements ? Naturally water resistant ? Entire surface transfers heat ? Panels are easily cut for tight installations ? Tube spacing is 8 inches on center.

RetURn panel with cOVeR & haRdwaRe (VT-RP)

VeRSatheRm panel with twO tUBing ShieldS (VT-mP)

VersaTherm? Panels
main Panels
Main Panel – Includes two Tube Shields (VT-RTS).
Item Number Price Quantity Case

main panel with tUBe ShieldS*
*Actual dimensions are 31-1/2" x 15-3/4" x 3/4"

Vt-mp

45.00

1

10

Return Panels

Return Panel – Includes Return Cover (VT-RRC) and Hardware (VT-RPH).

Item Number

Price

Quantity

Case

RetURn panel with cOVeR*

Vt-Rp

22.00

1

20

*Actual dimensions are 15-3/4" x 15-3/4" x 3/4"

1-866-752-2055 Fax 1-866-752-2054

www.legendhydronics.com

VersaTherm? Panels
Tube Shield
Replacement Tube Shield – Used with Main Panel to protect tubing from damage.
Item Number List Price Quantity

Replacement tUBe Shield

Vt-RtS

3.00

1

Return Panel cover

Replacement Return Panel Cover – Used with Return Panel to protect tubing from damage.

Item Number

List Price

Quantity

Replacement RetURn panel cOVeR

Vt-RRc

16.00

1

Return Panel Hardware

Replacement Return Panel Hardware – Used to fasten Return Panel Cover.
Item Number List Price Quantity

RetURn panel haRdwaRe
Includes 4 plastic Snap Rivets and 1 Screw

Vt-Rph

2.00

1

Filler Panels

Filler Panels – Used to fill non-active space along floor edges and around obstructions.
Item Number List Price Quantity

2" x 15-3/4" Small FilleR 7-7/8" x 15-3/4" laRge FilleR

Vt-Sm Vt-lF

4.00 6.00

1 1

Non- active space can also be filled with Standard 3/4” plywood.

Heat Transfer Plate

Return Panel Heat Transfer Plate – Optional plate increases heat output on Return Panel.
Item Number List Price Quantity

heat tRanSFeR plate - paiR

Vt-htRp

3.00

2

Floor Systems

Floor Systems

1-866-752-2055 Fax 1-866-752-2054

www.legendhydronics.com

Q uick Therm
QuickTherm? panels reduce labor costs by making it easy to properly install radiant tubing. There’s no need to tie, clip, or staple tubing to the substrate. ? One person can quickly put down the panels, and install the tubing ... while walking upright! ? The tube is better protected than in a wire mesh install ? Labor saving - installs 75% faster ? No bending or crawling ? Available in R-3 (limited quantity), R-5 or R-9 thicknesses ? Eliminates stapling and cable ties ? 2’x4’ panels are more accommodating to uneven gravel base and subbase surfaces ? 1/2", 5/8" or 3/4" radiant tubing can be used with QuickTherm QuickTherm panels can reduce installation time by up to 75%! Install thousands of feet of tubing in just a few hours!

?

radiant installation panels
(R5)

Lay down the QuickTherm panels, snap in the tubing and IT’S DONE!

Inter-locking ? grooves

? Eliminates, stapling and cable ties

(R9)

Quicktherm Panels can be drop shipped directly to the job site. Call customer service for a quote.

QuickTherm Panels
iSO-9002

QuickTherm Radiant Installation Panels – are 2’x 4’, can be used with, 1/2", 5/8" or 3/4" radiant tubing
and feature snap-tight grids with 3" on-center points for easy bends and optimal spacing of tubing.
Item Number List Price Quantity Bundle

QUicKtheRm 75 (limited AvAilAbility) 3/4" thicK (R3) - 6" & 12" tUBe Spacing

800-Qt75

22.00

1

25

Note: QuickTherm 75 is for use with 1/2" and 5/8" radiant tubing only

QUicKtheRm 100 1" thicK (R5) - 6", 9", 12" tUBe Spacing QUicKtheRm 200 2" thicK (R9) - 6", 9", 12" tUBe Spacing

800-Qt100

29.00

1

18

800-Qt200

34.00

1

10

1-866-752-2055 Fax 1-866-752-2054

www.legendhydronics.com

Tubing Installation Accessories
Tube Holding Pins
iSO-9002

Heavy DutyTube Holder Pins – Sturdy, high grip pins manually inserted to hold tubing up to 3/4" down in
rigid foam board installations. May also be used withTubeTrack,TubeTrack Duo and Mounting Rail (See Below)
Item Number List Price Bag Quantity

1-1/2" tUBe hOldeR pin - FOR inSUlatiOn 1" thicK 2" tUBe hOldeR pin - FOR inSUlatiOn 1-1/2" thicK

800-345 800-348

21.00 24.10

100 100

Ideal for penetrating hard cover on QuickTherm? panels in tough spots where additional support is needed to hold tubing.

Tube Bend Support
iSO-9002

Tube Bend Support 90? – Used to hold flexible tubing in a 90? bend without a fitting elbow and
creates a neat, professional appearance.
Item Number List Price Quantity

tUBe Bend SUppORt 90? – FitS Up tO 1/2" tUBing tUBe Bend SUppORt 90? – FitS Up tO 3/4" tUBing

800-305 800-304

6.20 7.25

1 1

Ideal for transitioning tubing to and from wall mounted manifolds. Protects tubing at this vulnerable location.

Tube Track & Tube Track Duo – Used to hold tubing to rigid foam, wood or concrete. Mounting holes

Tube Track

are provided for appropriate fasteners. Clips at end of each piece allow 3-1/4 foot sections to snap together. Use tube holding pins (top) in rigid foam board installations.
Item Number List Price Quantity

tUBe tRacK – 39" length

800-323

7.15

1

Holding tabs for 3/8" or1/2" tubing are spaced every 2".

tUBe tRacK dUO – 39" length

800-324

7.55

1

Holding tabs for 3/8" or 1/2" and for 5/8" or 3/4" tubing alternate every 4".

mounting Rail

Tube Mounting Rail – Used to hold tubing to rigid foam, wood or concrete. Mounting holes are provided for appropriate fasteners. 6-1/2 foot (78") rails have prescored "break" lines should shorter lengths be needed.
Item Number List Price Quantity

1/2" tUBe mOUnting Rail – 78" length 3/4" tUBe mOUnting Rail – 78" length

800-333 800-334

12.15 12.85

1 1

Holding slots are spaced every 2". Use tube holding pins (top) in rigid foam board installations.

Protection Sleeve

Tube Protection Sleeve – Used to protect tubing in a concrete slab at expansion joints.
Pre-slit 12" lengths allow for rapid installation after tubing has been installed and before concrete pour.
Item Number List Price Quantity

tUBe pROtectiOn SleeVe 12" – FitS Up tO 1/2" tUBing tUBe pROtectiOn SleeVe 12" – FitS Up tO 3/4" tUBing

800-313 800-314

1.40 1.65

1 1

Floor Systems

Floor Systems

1-866-752-2055 Fax 1-866-752-2054

www.legendhydronics.com

material Estimate Work Sheet
To estimate the number of panels required for your project enter the project square footage in the formulas below.

VersaTherm?
Main Panels (VT-MP)
NUMBER OF PANELS:

Panel Size = 31.5 in. x 15.75 in. = (496) 3.44 sq. ft. (10 panels per box)

x 0.233 =
Project square footage Number of Main Panels needed

(Round Up)

EXAMPLE: 400 ft2 x 0.233 = 93.2 or(94)
NUMBER OF CASES:

÷ 10 =
Number of Main Panels needed Number of Cases of needed

(Round Up)
*Use to calculate Number of Cases

EXAMPLE: 94 panels ÷ 10 = 9.4 or (10) boxes

Return Panels (VT-RP)
NUMBER OF PANELS:

Panel Size = 15.75 in. x 15.75 in. = (248) 1.72 sq. ft. (20 panels per box)

x 0.117 =
Project square footage

(Round Up)
Number of Return Panels needed*

EXAMPLE: 400 ft2 x 0.177 = 46.8 or (47)
NUMBER OF CASES:

÷ 20 =
Number of Return Panels needed Number of Cases needed

(Round Up)
*Use to calculate Number of Cases

EXAMPLE: 47 panels ÷ 20 = 2.35 or (3) boxes

QuickTherm?
QT100 (1") QT200 (2")
NUMBER OF PANELS:

Panel Size = 2 ft. x 4 ft. = 8 sq. ft. (18 panels ber bundle ) Panel Size = 2 ft. x 4 ft. = 8 sq. ft. (10 panels per bundle)

÷8=
Project square footage

(Round Up)
Number of QT Panels needed*

EXAMPLE: 3500 ft2 ÷ 8 = 437.5 or (438) panels
NUMBER OF BUNDLES:

÷ (18 or 10) =
Number of QT Panels needed Number of Bundles needed

(Round Up)
*Use to calculate Number of Bundles

EXAMPLE: 438 ÷ 10 (QT200) = 43.8 or (44) bundles

Notes: The project square footage includes only the area of the room or project space that is to be covered by tubing. Do not include areas under cabinets or any areas that will not receive tubing. PROJECT DESIGN IS HIGHLY RECOMMENDED with VersaTherm.

1-866-752-2055 Fax 1-866-752-2054

www.legendhydronics.com

Did you know?
? Legend Hydronics Does Not Have a Minimum Order ? Legend Hydronics Ships Every Order in 24 hours, Guaranteed ? Legend Hydronics Ships Every Order Complete or You Get 5% Off the Back Order ? Legend Hydronics Guarantees Error-Free Transactions ? Legend Hydronics Allows You to Return Material Without a Restocking Charge ? Legend Hydronics Guarantees Our Products for 5 Years or $25.00 Back

This LEGENDARY PERFORMANCE can result in as many as three or four additional inventory turns annually, significantly increasing your I.R.O.I. !

TERMS AND CONDITIONS OF SALE
TERMS OF PAYMENT
2% 30 Days, Net 45 Cash discount is to be calculated on the total amount of the invoice before additions for transportation. A 1-1/2% service charge per month will be added to past due balances.

FREIGHT POLICY
Freight charges will be prepaid on orders of $1,200.00 net or more (excluding VersaTherm/QuickTherm) to one destination in the Continental United States. All Legend Products may be combined to reach freight minimum. Otherwise, freight terms are F.O.B. Shelby Township, Michigan.

VersaTherm?& QuickTherm? FREIGHT POLICY
Freight charges will be prepaid on all orders for VersaTherm/QuickTherm Panels of $2,000.00 net or more to one destination in the Continental United States. All Legend products may be combined with VersaTherm/QuickTherm Panels to reach $2,000.00 net. Otherwise, freight terms are F.O.B. Shelby Township, Michigan.

MINIMUM ORDER THERE IS NO MINIMUM ORDER AT LEGEND HYDRONICS. ORDER ACCEPTANCE
All orders are subject to acceptance by Legend Hydronics, a division of Legend Valve and Fitting, Inc. Possession of our catalog or price list by any person is not to be construed as an offer to sell to that person. All prices are subject to change without notice.

Floor Systems

It takes more than just hard work to become part of a legend.
It takes a commitment to exceed the expectations of our customers in every way possible. It takes unparalleled performance in everything we do. From 24 hour order turnaround to industry leading fill rates, a no hassle return policy and a willingness to do everything it takes to help you succeed. With the launch of Legend Hydronics, the newest division of Legend Valve and Fitting, Inc. we guarantee the same service you've come to expect.

51245 Filomena Drive Shelby Township, MI 48315

tel:1-866-752-2055 Fax:1-866-752-2054
www.legendhydronics.com

A division of:

LH-FSPL0509

L-FSPL0509


相关文章:
国内外地热资源发电技术
此外,由于地热能源 是地区性自产的,其能够有效地缓解对于国外能源的依赖,符合...根据可利用地热资源的特点以及采用技术方案的不同,主 要有干蒸汽发电技术、地下...
十大地暖管道品牌排行榜
此外 EVOH 阻氧层先进技术保护让肯森地暖管水质更有效控 制滋生细菌、有效防止供暖系统内的金属部件腐蚀生锈、高温时管道不易老化,确保了地暖 管使用寿命更长,...
论地暖的优缺点
地暖的优缺点_自然科学_专业资料。地板采暖,又称...还应归于中国的热炕头呢,后来传到国外,并得到创新...的首都人民大会堂的门厅,就使用了地面辐射供暖技术。...
地热利用方式及意义01
在我国,应根据 资源分布特点制定地热发展规划, 在资源品质较好的地区发展地热发电, 在有条件的地区发 展各种地热直接利用技术,采用综合梯级利用提高资源利用效率。 ...
德国进口管道十大品牌
●代理商评价: 在中国市场知名度一般, 装配和紧固技术优秀, 具有比较明显的市场优势。 在地暖方面,市场口碑很好。 ●消费者评价:安装完之后,很放心,基本没有...
中国地暖行业十强企业
售的暖通专业公司, 是国内第一家以地板采暖系统的设计、 施工和服务注册商标的品牌地暖 公司,一直以来,小脚丫致力于将最优秀的产品、最先进技术理念和施工工艺...
地热发展存在的问题
1. 地热资源勘查工作薄弱 我国地热资源普查勘探,资源分析评估技术国外地热开发利用先进国家相比具有较大的差 距。我国一直都有较为严格的地热资源地质勘查规范,但...
节能地暖发展历程与回顾
节能地暖发展历程与回顾_建筑/土木_工程科技_专业资料。 中国地暖行业的发展一直...是我们有足够的 信心能够消化吸收国外先进的产品设计理念和结合中国国情的技术...
常见地暖知识问答
地暖技术是从哪一个国家引进的?答:地暖在国外已采用多年,在欧州、北美、...、地暖的工作原理是什么?答:地暖(低温热水地面辐射供暖)是先进的供热方式。其...
地暖特点优势总说明
在国内地暖领域占有绝对领先地位, 因此国务院决定 把“狄诺瓦”的企业标准定为:我...其他三个都在国外, 国外先进的是丹麦的, 而狄诺瓦双导发热电 缆的技术含量...
更多相关标签:
引进国外先进技术例子 | 引进国外先进技术 | 国外先进农业技术 | 国外先进环保技术 | 国外先进技术 | 国外先进医疗技术 | 国内外先进技术现状 | 国外先进 测温技术 |