当前位置:首页 >> 电力/水利 >>

LED STREET LAMP -A


Specification For street lamp

PRODUCT NAME /: LED Street Lamp PART NO /: SG LLD50/80/100/120/150/200W-03

Prepared By :

Checked By :

Approved By :

Page 0

Table

of

Content

1. Features:...........................................................................................2 2. Applications:.....................................................................................2 3. Electrical /Optical Characteristics:...............................................3 4. Main Characteristics:..........................................................................4 5. Dimension:………………………………………………………………....5 6. Final Quality Control:…………………………………….……...6 7. Reliability test:......................................................................6 8. Package: ............................................................................................8 9. Notes :...................................................................................9 10. Quality commitment:..……………………………….………….…...…........10 11. Contact customer service:.................................................................10 12.Products Application Cases:...…………………………….….......11

A .Features
? The product is a new energy-saving lighting source, with the performance of high brightness, low attenuation, long lifetime and high reliability.

Page 1

?

The product is designed with the High quality aluminum alloy which will enhance scatter-heated areas, The surface temperature of body is less than 50 degree( worked for a long time by the temperature 25-30 degree),the surface temperature is lower than traditional halogen lamp at the same conditions, more safety to use. The product is made of high quality high power LED source with low attenuation, Low power consumption, highly efficiency, highly antistatic, saving energy and protection environment, long lifespan(>50.000hrs) The product by special designed is beautiful and generous on appearance. The characteristic of the product is anti-impact, anti-vibration, and Safety etc, as a new generation products of green lighting.

?

? ?

? ?

As a cold luminescence source products, it has never effected the surface temperature of object irradiated and ambience temperature during the operation time It can be chosen by yourself for different color temperature, such as pure white, warm white and natural white,etc.

B .Applications:
? ? ? ? Courtyard Road Office Building Other Lighting

C .Electrical /Optical Characteristics
Sign Numb er 1 2 3 4 Item 50W Input Voltage Power Consumption Power factor Power Supply U P PF / 50W 80W 80W 100W 120W 150W 200W Description

AC 100-240V 100W 120W 150W 200W

≥0.9 Isolated power supply

Page 2

5 6 7 8 9 10 11

power-supply efficiency Emitting Color Luminous Luminous Effilacy Wave length/CCT Color rendering index SDCM

η / Φ / Tc Ra X/Y

≥ 94 % Pure White, Warm White , Natural White 3600 6000 8000 9600 12000 16000 lm lm lm lm lm lm ≥80 lm/w 2700-6500 K ≥ 70 ≤ 4.0 120° 30000 h

12 Beam angle / 13 Life time(h) H Notes : 1. Power temperature of the test error: ±0.5W; 2. Flux measurement error is ±5%; 3. Beam angle measurement error: ±10°

D. Main Characteristics
Number 1 Item Net weight Description 50W 4kg 36.5*3 2*12.5 cm 40 PCS 80W 4kg 36.5*3 2*12.5 cm 60 PCS 100W 4kg 41.5*3 2*12.5 cm 80 PCS 120W 6kg 47.3*3 2*12.5 cm 80 PCS 150W 8kg 57.5*3 2*12.5 cm 120 PCS 200W 8kg 57.5*3 2*12.5 cm 160 PCS

2

Size LED Quantity LED LED Type LED Main material IK Code IP Code

3 4 5 6 7

CREE Aluminum IK60 IP65

Page 3

8 9 10 11 12 13 14

Luminaries Class Certifications Socket Type Operating Temperature Storage Temperature Operating Humidity Storage Humidity

Class Ⅲ CE RoHS water joint -20℃ to +50℃ -25℃ to +60℃ RH10%-RH80% RH10%-RH80%

E. Dimension:

50W 36.5*32*12.5c m

80W 36.5*32*12.5c m

100W 41.5*32*12.5c m

120W 47.3*32*12.5c m

150W 57.5*32*12.5c m

200W 57.5*32*12.5c m

Page 4

Notes :
1. All dimension units are centimeter; 2. All dimension tolerance is ± 0.5cm;

F. (Final Quality Control) :
Item Visual Inspectio n Pressure Test Earth Test Power Test Packagin g No dirt and scratches 100% Content Detection rate

Primary to safety ground 1440V(5S) 100mΩ(0.5Ω),the test time is 3 seconds and the current is 25A; one end connected to the lamp housing and the other end connected to the incoming line of the lamp (ground lead) Switch on the Power Meter and test the power;Measured value is within ± 10% of the nominal value Mounting accessories,instruction manual,certificate,nameplate and Model No should be complete and without error.

100%

100% 100% 100%

G.(Reliability test)
Item Instrume nt Testing Methods (Basis)

Page 5

Pressure Test

Pressure tester

Power input end should apply a stable frequency sine wave voltage 1000V+2*U to the lamp housing,leakage current must not exceed 5mA and the test time is 1min,the instrument must not alarm. ((Note: U is the maximum voltage of the power supply) Refer to the standard "7000.1-2007 General requirements and test of lighting fixtures" / "GB 4208-93"Mount the lamp vertically, spray water 1H from the top of the lamp with a pipe. There should be no signs of water inside the lamp. The lamp can work normally and pass safety tests simultaneously. "GB-T1771-1991" Paint and varnish neutral salt fog resistance measurement and "GB5938-86" Light industrial products metal plating and chemical treatment layer corrosion test method_ Neutral salt spray (NSS) test method. Place the painted parts into the Salt Spray Tester and test for 96H. Place the lamp in the instrument and make it work normally, start to test when it is stable; set the temperature at +60 ° (± 2 °), keep the lamp

IP test

Water-sp ray test

Salt spray test

Salt Spray Tester

High Temperat ure Test Low Temperat ure Test High Temperat ure and Humidity Test Thermal Shock

Constant temperat ure humidity chamber

working in the instrument for 8h Place the lamp in the instrument and make it work normally, start to test when it is stable; set the temperature at -25 ° (± 2 °), keep the lamp working in the instrument for 8h Place the lamp in the instrument and make it work normally, start to test when it is stable; set the temperature at 45 ° (± 2 °), humidity at 75%, keep the lamp working in the instrument for 8h

Thermal Shock Chamber s

Place the lamp in the instrument and make it work normally, start to test when it is stable; set the temperature at -25 ° to 60 °, shock 20s per cycle,test 1000 times.

H. Package

Page 6

Carton

1.

A→Length of carton B→Width of carton C→High of carton 50W 80W
510mm*390mm *215mm

100W
510mm*390mm *215mm

120W
560mm*365mm *155mm

150W
625mm*365mm *155mm

200W
625mm*365mm *155mm

510mm*390mm *215mm

2. 1pcs tube packed in one carton box; 1 Notes: All dimension units are millimeters; All dimension tolerance is ±0.5mm;

I.Notes The user: Thank you buy the use of sogood LED fluorescent lamp, please read the instructions carefully before using.
1. INSTALLATION

Page 7

1) Before installing, firstly please make sure if it is ok during transportation, don’t install it if damaged and contact with your local distributors. 2) 3) Please make sure it is far away from fire or high temperature objects when using. Please don’t sight directly LED irradiance surface for a long time, and don’t Irradiate others’ eyes with led reflected beam.

2. MATANENCE 1) 2) 3) Please turn off the power before cleaning. It is not allowed to clean lamp by the chemicals or any canker goods. After cleaning lamp, it can be used continuously when it is completely dry

J.Quality commitment: This product warranty of two years, to provide free repairwarranty period, more than the warranty period repairservices will be charged in accordance with the provisions of. The following situations not covered under warrant: Unable to provide purchase invoices. Damage caused by improper use of unexpected factors or. To repair the damage.

Page 8

K. Products Application Cases

Page 9

Page 10



相关文章:
About the LED street lamp technology development pr...
About the LED street lamp technology development present situation_互联网_IT/计算机_专业资料。About the LED street lamp technology development present ...
LED中英对照
light tube tri-phosphor tri-phosphor tube light pseudo-color LED panel all...light water fountain lamp / light outdoor lamp / light street lamp / ...
LED LAMP热阻分析
LED LAMP 熱阻分析 一.概述 熱阻是物體傳導熱量的能力,是物體的一種固有屬性.表示為在熱的傳遞 程中,物體上的某一點到另一點的溫度差與引起溫度差之能量之...
LED ceiling light(update)
LED ceiling light(update)_教学反思/汇报_教学研究_教育专区。led天花灯中英文技术说明材料LED 天花灯 LED Ceiling Lamp 图片 Picture 型 号 Product Model 开...
led lamp
led lamp_物理_自然科学_专业资料。led lamp 时间:2008-10-24 23:02:45 来源:互联网 作者:周炳峻 刘峰 任建军 编辑: 【关闭】 本文笔者介绍一下利用废旧...
Lamp LED产品名称
Lamp LED 产品名称 546 产品颜色 红色 蓝色 绿色 F5 草帽 产品颜色 透明 透明 透明 透明 透明 透明 产品名称 发光颜色 F5 草帽红光 F5 草帽蓝光 F5 草帽绿光 ...
LED 平板灯-LED panel light(update)
LED 平板灯-LED panel light(update)_法律资料_人文社科_专业资料。爱亿迪LED平板灯LED 平板灯 LED Panel Lamp 图片 Picture 型号 Model 尺寸 Dimension 输入...
LED照明常见词汇中英对照(销售)
LED 照明常用词汇中英文对照 专业照明 illumination 防爆灯 explosion-proof lamp...lamp/light 户外灯 outdoor lamp 路灯 street lamp/light 庭院灯 garden lamp/...
敦煌网分享LED灯具外贸词汇
敦煌网分享LED灯具外贸词汇_经济/市场_经管营销_专业资料。LED灯具外贸词汇 ...lamp / light 路灯 street lamp / light 投光射灯 spot lamp / light 草坪...
LED专业英语[最全]
LED专业英语[最全]_英语学习_外语学习_教育专区。LED 照明常用词汇中英文对照...street lamp / light down lamp / light spot lamp / light garden lamp / ...
更多相关标签: