当前位置:首页 >> 能源/化工 >>

NACE


NACE CIP LEVEL 1 REFERENCE MATERIALS:
The following are excellent reference materials for anyone planning to take CIP Level 1. Students are not expected to purchase these materials. Howe

ver, if you have access to any of these materials we encourage you to review them. ? ? NACE Standard RP0188 (latest revision), 'Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates' NACE Standard RP0178 (latest revision), 'Fabrication Details, Surface Finish Requirements, and Proper Design Considerations for Tanks and Vessels to Be Lined for Immersion Service' ? ? ? ? ? ? ? ? NACE No. 1/SSPC-SP 5 (latest revision), 'White Metal Blast Cleaning' NACE No. 2/SSPC-SP 10 (latest revision), 'Near-White Metal Blast Cleaning' NACE No. 3/SSPC-SP 6 (latest revision), 'Commercial Blast Cleaning' NACE No. 4/SSPC-SP 7 (latest revision), 'Brush-Off Blast Cleaning' SSPC-VIS 1 (latest revision), 'Guide and Reference Photographs for Steel Surfaces Prepared by Dry Abrasive Blast Cleaning' SSPC-VIS 3 (latest revision), 'Guide and Reference Photographs for Steel Surfaces Prepared by Hand and Power Tool Cleaning' SSPC-PA 2 (latest revision), 'Measurement of Dry Coating Thickness with Magnetic Gages' ISO 8504-2 (latest revision), 'Preparation of Steel Substrates Before Application of Paints and Related Products—Surface Preparation Methods—Part 2: Abrasive Blast Cleaning' ? ? ? ? ? ASTM D 4417 (latest revision), 'Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel' ASTM E 337 (latest revision), 'Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)' ASTM D 4414 (latest revision), 'Standard Practice for Measurement of Wet Film Thickness by Notch Gages' The Protective Coating User's Handbook, by Dr. Louis D. Vincent Generic Coating Types: An Introduction to Industrial Maintenance Coating Materials (Available from SSPC)

NACE CIP LEVEL 2 REFERENCE MATERIALS:

The following are excellent reference materials for anyone planning to take CIP Level 2. Students are not expected to purchase these materials. However, if you have access to any of these materials we encourage you to review them. ? ? NACE Standard RP0188 (latest revision), 'Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates' NACE Standard RP0178 (latest revision), 'Fabrication Details, Surface Finish Requirements, and Proper Design Considerations for Tanks and Vessels to Be Lined for Immersion Service' ? NACE Publication 6A192/SSPC-TR 3 (latest revision), 'Dehumidification and Temperature Control During Surface Preparation, Application, and Curing for Coatings/Linings of Steel Tanks, Vessels, and Other Enclosed Spaces' ? ? NACE No. 5/SSPC-SP 12 (latest revision), 'Surface Preparation and Cleaning of Metals by Waterjetting Prior to Recoating' NACE No. 12/AWS C2.23M/SSPC-CS 23.00 (latest revision), 'Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel' ? ? ? ? ? ? ? ? SSPC-PA 2 (latest revision), 'Measurement of Dry Coating Thickness with Magnetic Gages' ASTM D 4417 (latest revision), 'Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel' ASTM E 337 (latest revision), 'Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)' ASTM D 4414 (latest revision), 'Standard Practice for Measurement of Wet Film Thickness by Notch Gages' SSPC-VIS 1 (latest revision), 'Guide and Reference Photographs for Steel Surfaces Prepared by Dry Abrasive Blast Cleaning' SSPC-VIS 3 (latest revision), 'Guide and Reference Photographs for Steel Surfaces Prepared by Hand and Power Tool Cleaning' NACE VIS 7/SSPC-VIS 4 (latest revision), 'Guide and Reference Photographs for Steel Surfaces Prepared by Waterjetting' Corrosion Prevention by Protective Coatings, Second Edition, By C.G. Munger, Revision Author L.D. Vincent (Available from NACE. This book will be distributed to students at the CIP Level 2 course.) ? Generic Coating Types: An Introduction to Industrial Maintenance Coating Materials (Available from SSPC)

NACE ALL STANDARDS:
ANSI/NACE Standard RP0104-2004 The Use of Coupons for Cathodic Protection Monitoring Applications

ANSI/NACE Standard RP0204-2004 Stress Corrosion Cracking (SCC) Direct Assessment Methodology

Essentials of Surface Preparation

MR0103 MR0103-2005 Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments

MR0174 MR0174-2001 Recommendations for Selecting Inhibitors for Use as Sucker-Rod Thread Lubricants

MR0176 MR0176-2000 Metallic Materials for Sucker-Rod Pumps for Corrosive Oilfield Environments

NACE MR0175/ISO 15156, Petroleum and natural gas industries—Materials for use in H2S-containing environments in oil and gas production

NACE No. 1/SSPC-SP 5 White Metal Blast Cleaning

NACE No. 10/SSPC-PA 6 Fiberglass-Reinforced Plastic (FRP) Linings Applied to Bottoms of Carbon Steel Aboveground Storage Tanks

NACE No. 11/SSPC-PA 8 Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels

NACE No. 12/AWS C2.23M/SSPC-CS 23.00 Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel

NACE No. 2/SSPC-SP 10 Near-White Metal Blast Cleaning

NACE No. 3/SSPC-SP 6 Commercial Blast Cleaning

NACE No. 4/SSPC-SP 7 Brush-Off Blast Cleaning

NACE No. 5/SSPC-SP 12 Surface Preparation and Cleaning of Metals by Waterjetting Prior to Recoating

NACE No. 6/SSPC-SP 13 Surface Preparation of Concrete

NACE No. 8/SSPC-SP 14 Industrial Blast Cleaning

NACE VIS 7/SSPC-VIS 4 Guide and Visual Reference Photographs for Steel Cleaned by Waterjetting

NACE VIS 9/SSPC-VIS 5 Guide and Reference Photographs for Steel Surfaces Prepared by Wet Abrasive Blast Cleaning

NACE/SSPC Joint Surface Preparation Standards Package (NACE No 1,2,3,4,5,6,8)

RP0100 RP0100-2004 Cathodic Protection of Prestressed Concrete Cylinder Pipelines

RP0102 RP0102-2002 In-Line Inspection of Pipelines

RP0169 RP0169-2002 Control of External Corrosion on Underground or Submerged Metallic Piping Systems

RP0170 RP0170-2004 Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking

During Shutdown of Refinery Equipment

RP0176 RP0176-2003 Corrosion Control of Steel Fixed Offshore Structures Associated with Petroleum Production

RP0177 RP0177-2000 Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems

RP0178 RP0178-2003 Fabrication Details, Surface Finish Requirements, and Proper Design Considerations for Tanks and Vessels to Be Lined for Immersion Service

RP0180 RP0180-2001 Cathodic Protection of Pulp and Paper Mill Effluent Clarifiers

RP0185 RP0185-96 Extruded Polyolefin Resin Coating Systems with Soft Adhesives for Underground or Submerged Pipe

RP0186 RP0186-2001 Application of Cathodic Protection for External Surfaces of Steel Well Casings

RP0187 RP0187-05 Design Considerations for Corrosion Control of Reinforcing Steel in Concrete

RP0188 RP0188-99 Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates

RP0189 RP0189-2002 On-Line Monitoring of Cooling Waters

RP0191 RP0191-2002 The Application of Internal Plastic Coatings for Oilfield Tubular Goods and Accessories

RP0192 RP0192-98 Monitoring Corrosion in Oil and Gas Production with

Iron Counts

RP0193 RP0193-2001 External Cathodic Protection of On-Grade Carbon Steel Storage Tank Bottoms

RP0195 RP0195-2001 Recommended Practice for Corrosion Control of Sucker Rods by Chemical Treatment

RP0196 RP0196-2004 Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks

RP0197 RP0197-2004 Standard Format for Computerized Electrochemical Polarization Curve Data Files

RP0198 RP0198-2004 The Control of Corrosion Under Thermal Insulation and Fireproofing Materials—A Systems Approach

RP0199 RP0199-2004 Installation of Stainless Chromium-Nickel Steel and Nickel-Alloy Roll-Bonded and Explosion-Bonded Clad Plate in Air Pollution Control Equipment

RP0200 RP0200-2000 Steel-Cased Pipeline Practices

RP0273 RP0273-2001 Handling and Proper Usage of Inhibited Oilfield Acids

RP0274 RP0274-2004 High-Voltage Electrical Inspection of Pipeline Coatings

RP0281 RP0281-2004 Method for Conducting Coating (Paint) Panel Evaluation Testing in Atmospheric Exposures

RP0285 RP0285-2002 Corrosion Control of Underground Storage Tank

Systems by Cathodic Protection

RP0286 RP0286-2002 Electrical Isolation of Cathodically Protected Pipelines

RP0287 RP0287-2002 Field Measurement of Surface Profile of Abrasive Blast-Cleaned Steel Surfaces Using a Replica Tape

RP0288 RP0288-2004 Inspection of Linings on Steel and Concrete

RP0290 RP0290-2000 Impressed Current Cathodic Protection of Reinforcing Steel in Atmospherically Exposed Concrete Structures

RP0291 RP0291-2005 Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories

RP0292 RP0292-2003 Installation of Thin Metallic Wallpaper Lining in Air Pollution Control and Other Process Equipment

RP0294 RP0294-94 Design, Fabrication, and Inspection of Tanks for the Storage of Concentrated Sulfuric Acid and Oleum at Ambient Temperatures

RP0295 RP0295-2003 Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars

RP0296 RP0296-2004 Guidelines for Detection, Repair, and Mitigation of Cracking of Existing Petroleum Refinery Pressure Vessels in Wet H2S Environments

RP0297 RP0297-2004 Maintenance Painting of Electrical Substation Apparatus Including Flow Coating of Transformer Radiators

RP0298 RP0298-98 Sheet Rubber Linings for Abrasion and Corrosion Service

RP0300 RP0300-2003 Pilot Scale Evaluation of Corrosion and Fouling Control Additives for Open Recirculating Cooling Water Systems

RP0302 RP0302-2002 Selection and Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Molten Sulfur Service

RP0303 RP0303-2003 Field-Applied Heat-Shrinkable Sleeves for Pipelines: Application, Performance, and Quality Control

RP0304 RP0304-2004 Design, Installation, and Operation of Thermoplastic Liners for Oilfield Pipelines

RP0375 RP0375-99 Wax Coating Systems for Underground Piping Systems

RP0386 RP0386-2003 Application of a Coating System to Interior Surfaces of Covered Steel Hopper Rail Cars in Plastic, Food, and Chemical Service

RP0387 RP0387-99 Metallurgical and Inspection Requirements for Cast Galvanic Anodes for Offshore Applications

RP0388 RP0388-2001 Impressed Current Cathodic Protection of Internal Submerged Surfaces of Carbon Steel Water Storage Tanks

RP0390 RP0390-98 Maintenance and Rehabilitation Considerations for Corrosion Control of Atmospherically Exposed Existing Steel-Reinforced Concrete Structures

RP0391 RP0391-2001 Materials for the Handling and Storage of

Commercial Concentrated (90 to 100%) Sulfuric Acid at Ambient Temperatures

RP0392 RP0392-2001 Recovery and Repassivation After Low pH Excursions in Open Recirculating Cooling Water Systems

RP0394 RP0394-2002 Application, Performance, and Quality Control of Plant-Applied, Fusion-Bonded Epoxy External Pipe Coating

RP0395 RP0395-99 Fusion-Bonded Epoxy Coating of Steel Reinforcing Bars

RP0398 RP0398-98 Recommendations for Training and Qualifying Personnel as Railcar Coating and Lining Inspectors

RP0399 RP0399-2004 Plant-Applied, External Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control

RP0402 RP0402-2002 Field-Applied Fusion-Bonded Epoxy (FBE) Pipe Coating Systems for Girth Weld Joints: Application, Performance, and Quality Control

RP0403 RP0403-2003 Avoiding Caustic Stress Corrosion Cracking of Carbon Steel Refinery Equipment and Piping

RP0472 RP0472-2000 Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments

RP0475 RP0475-98 Selection of Metallic Materials to Be Used in All Phases of Water Handling for Injection into Oil-Bearing Formations

RP0487 RP0487-2000 Considerations in the Selection and Evaluation of Rust Preventives and Vapor Corrosion Inhibitors for Interim (Temporary)

Corrosion Protection

RP0490 RP0490-2001 Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coatings of 250 to 760 ?m (10 to 30 mils)

RP0491 RP0491-2003 Worksheet for the Selection of Oilfield Nonmetallic Seal Systems

RP0492 RP0492-99 Metallurgical and Inspection Requirements for Offshore Pipeline Bracelet Anodes

RP0495 RP0495-2003 Guidelines for Qualifying Personnel as Abrasive Blasters and Coating and Lining Applicators in the Rail Industries

RP0497 RP0497-2004 Field Corrosion Evaluation Using Metallic Test Specimens

RP0502 RP0502-2002 Pipeline External Corrosion Direct Assessment Methodology

RP0572 RP0572-2001 Design, Installation, Operation, and Maintenance of Impressed Current Deep Groundbeds

RP0575 RP0575-2001 Internal Cathodic Protection Systems in Oil-Treating Vessels

RP0590 RP0590-96 Recommended Practice for Prevention, Detection, and Correction of Deaerator Cracking

RP0592 RP0592-2001 Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Concentrated (90 to 98%) Sulfuric Acid Service

RP0602 RP0602-2002 Field-Applied Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control

RP0690 RP0690-2004 Standard Format for Collection and Compilation of Data for Computerized Material Corrosion Resistance Database Input

RP0692 RP0692-2003 Application of a Coating System to Exterior Surfaces of Steel Rail Cars

RP0775 RP0775-2005 Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Oilfield Operations

RP0892 RP0892-2001 Coatings and Linings Over Concrete for Chemical Immersion and Containment Service

SPECIALTY PACKAGE: Application of Railcar Coating Systems

SPECIALTY PACKAGE: Cathodic Protection of Pipelines/Tanks

SPECIALTY PACKAGE: Corrosion Control of Rebar

SPECIALTY PACKAGE: RP0285-2002 / API RP 1632

SSPC-VIS 2 Standard Method of Evaluating Degree of Rusting on Painted Steel Surfaces

TM0101 TM0101-2001Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Tank Systems

TM0102 TM0102-2002 Measurement of Protective Coating Electrical Conductance on Underground Pipelines

TM0103 TM0103-2003 Laboratory Test Procedures for Evaluation of SOHIC Resistance of Plate Steels Used in Wet H2S Service

TM0104 TM0104-2004 Offshore Platform Ballast Water Tank Coating System Ev

TM0169 TM0169-2000 Laboratory Corrosion Testing of Metals

TM0172 TM0172-2001 Determining Corrosive Properties of Cargoes in Petroleum Product Pipelines

TM0173 TM0173-2005 Methods for Determining Quality of Subsurface Injection Water Using Membrane Filters

TM0174 TM0174-2002 Laboratory Methods for the Evaluation of Protective Coatings and Lining Materials on Metallic Substrates in Immersion Service

TM0177 TM0177-96 Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments

TM0183 TM0183-2000 Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing Environment

TM0185 TM0185-2000 Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods by Autoclave Testing

TM0186 TM0186-2002 Holiday Detection of Internal Tubular Coatings of 250 to 760 ?m (10 to 30 mils) Dry-Film Thickness

TM0187 TM0187-2003 Evaluating Elastomeric Materials in Sour Gas Environments

TM0190 TM0190-98 Impressed Current Laboratory Testing of Aluminum Alloy Anodes

TM0192 TM0192-2003 Evaluating Elastomeric Materials in Carbon Dioxide Decompression Environments

TM0193 TM0193-2000 Laboratory Corrosion Testing of Metals in Static Chemical Cleaning Solutions at Temperatures Below 93° (200° C F)

TM0194 TM0194-2004 Field Monitoring of Bacterial Growth in Oilfield Systems error 'ASP 0113'


相关文章:
NACE 标准21218
……………………………………………..2 II 第一部分 一般要求 1.1 本 NACE 标准描述了对应用于油田管状设备内涂层的非导电涂层漏点的非 破坏性检测方法。...
NACE产品金属材料要求
NACE产品金属材料要求_工学_高等教育_教育专区。NACE抗酸环境下 NACE 产品金属材料 1. 1.1 1.2 范围 本规范规定了有NACE要求的产品对金属材料的一般性要求。 ...
ISO SSPC NACE 标准比较
NACE (none) (none) JSRA Pt 3 Pt 2/Pt1 ISO Solvent cleaning 溶剂清理 SSPC NACE (none) JSRA (none) (none) SP 1 各标准并不能完全对应,请参阅...
NACE0177-2007翻译
他们可以是在对金属构筑物和交流电腐蚀控制和减轻 领域有相关经验的被 NACE 认证的专业工程师和腐蚀专家。 1.4 本标准应连同在本标准中提及的参考文献一起使用。...
NACE1 分级参考试题及答案
NACE 考试参考题(一级) 1 ‘CIP’是指: B B (NACE 国际)涂装检查人员纲要 E 上述所有意思都不是 A C 涂料吸入泵 A 首席检查人员 D 上述所有意思 2 3 ...
NACE材料要求
江苏良正阀门有限公司抗硫阀门材料质量要求关于抗硫阀门材料按照 NACE 标准要求,特制定以下质量要求: 球阀材料表 零件名称 阀体 球体 阀杆 阀座 O 型圈 填料、...
NACE 国际标准NACE RP 0188
NACE 国际标准NACE RP 0188_机械/仪表_工程科技_专业资料。导电底材上新涂层的不连续区域(漏涂)的测定 NACE 国际标准 NACE RP 0188-99 导电底材上新涂层的不...
NACE 2015年认证培训课程表
NACE 2015年认证培训课程表_调查/报告_表格/模板_实用文档。NACE 2015年认证培训课程表NACE 2015 年认证培训课程表 CIP-1 涂装检验师一级课程 日期 2014 年 ...
NACE测试题
NACE测试题_其它考试_资格考试/认证_教育专区。nace考试测试题一 1 .如果手摇干湿表的干球和湿球温度一样,则说明空气是饱和的,它无法吸收更多的水分?(A 正确...
nace2考试内容-1
5. 按照 NACE No.5/SSPC-SP12 水喷射标准,清理至 WJ-1 的钢板表面 允许残留有多少松散的锈蚀和污渍(0%) 。 按照 NACE No.5/SSPC-SP12 水喷射标准,清理...
更多相关标签: