当前位置:首页 >> 信息与通信 >>

发电机组充电机1


DSEEXTRA BATTERY CHARGERS AND EXPANSION MODULES.
?

?

SPECIFICATION
DC OUTPUT 12V DC or 24V DC (24V DC available in 5 Amp only) AC INPUT 2 Amp 12 Volt: 85V – 25

0V absolute voltage range 110V – 240V nominal voltage range 5 Amp 12 Volt: 85V – 305V absolute voltage range 110V – 277V nominal voltage range 5 Amp 24 Volt: 85V – 305V absolute voltage range 110V – 277V nominal voltage range OUTPUT CURRENT 2 Amp at 13.7V DC 5 Amp (12V) at 13.7V DC 5 Amp (24V) at 27.4V DC REGULATION Line <0.01% Vo Load 1% Vo OPERATING TEMPERATURE RANGE -30°C to + 55°C CASE Polycarbonate DIMENSIONS 2 Amp 108.03mm x 101.10mm x 48.6mm 4.25” x 3.98” x 1.91” 5 Amp 136.48mm x 140.41mm x 63.40mm 5.37” x 5.53” x 2.5” WEIGHT 2 Amp 0.16Kg 5 Amp 0.5Kg PROTECTIONS Short Circuit, Over Voltage, Over Current, Reverse Polarity

DSE9150/DSE9130/DSE9255 CHARGERS 2 AMP 12 VOLT/5 AMP 12 VOLT/5 AMP 24 VOLT COMPACT BATTERY

5 AMP 12 & 24 VOLT

ENVIRONMENTAL TESTING STANDARDS
ELECTRO MAGNETIC CAPABILITY BS EN 61000-6-2 EMC Generic Emission Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment TEMPERATURE BS EN 60068-2-2 Test Ab to +70oC 60067-2-2 Hot Test Ab to -30oC 60068-2-1 Cold VIBRATION BS EN 60068-2-6 Ten sweeps in each of three major axes 5Hz to 8Hz @ +/-7.5mm, 8Hz to 500Hz @ 2gn HUMIDITY BS 2011 part 2.1 60068-2-30 Test Cb Ob Cyclic 93% RH @ 40oC for 48 hours SHOCK BS EN 60068-2-27 Three shocks in each of three major axes 15gn in 11mS

2 AMP The 2 Amp and 5 Amp Battery Chargers have been designed to be permanently connected to batteries, keeping them charged to their maximum capacity. The chargers can be either mounted via DIN Rail or to the Chassis, using the fixing holes that are built into the case. The chargers stylish design includes an LED indicator on the front that shows when the charger is in a normal or overload condition. To improve reliability the chargers do not include any moving parts. They will also continue to operate during cranking and running. All three chargers can also accept multiple AC voltage connections. ADVANCED FEATURES Multi-Stage Intelligent Charging ? Constant, maximum current during charge recovery phase ? Constant voltage ? Chargers automatically return to float mode when charging is complete Low Output Ripple ? Makes the chargers ideal for all battery types Full Protection ? Reverse polarity protection, short circuit protection and current limiting Boost Mode (5 AMP charger only) ? Boosts and equalises cell charge improving battery performance and life ? Simple boost connection using on-board terminals Power Save Mode ? Once the battery is fully charged the chargers switch to Eco-Power to save energy STANDARD FEATURES ? Suitable for a wide range of battery types ? No moving parts ? Switched mode design ? Charge fail output ? Minimum 80% efficiency throughout full operating range

DEEP SEA ELECTRONICS PLC Highfield House Hunmanby Industrial Estate Hunmanby, North Yorkshire YO14 0PH England
Registered in England & Wales No.01319649

TELEPHONE +44 (0)1723 890099 FACSIMILE +44 (0)1723 893303
VAT No.316923457

EMAIL sales@deepseaplc.com WEBSITE www.deepseaplc.com

?

DEEP SEA ELECTRONICS INC 3230 Williams Avenue Rockford IL 61101-2668 USA

TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708

EMAIL sales@deepseausa.com WEBSITE www.deepseausa.com

TYPICAL BATTERY CHARGER CONNECTION DIAGRAM

DSE9000 SERIES BATTERY CHARGERS
DSE9150 ONLY NC -OP +OP DSE9130 / DSE9255 ONLY

BOOST

BOOST CHARGE CHARGE FAIL FAIL CLOSES UPON CHARGER FAILURE

N

L

DO NOT CONNECT

LINK FOR BOOST CHARGE

BATTERY AND PANEL LOAD CHARGER TYPE DSE9130 12V 5A DSE9150 12V 2A DSE9255 24V 5A

AC SUPPLY

RECOMMENDED AC FUSE 2.5A ANTI-SURGE 1.5A ANTI-SURGE 3.0A ANTI-SURGE

DEEP SEA ELECTRONICS PLC maintains a policy of continuous development and reserves the right to change the details shown on this data sheet without prior notice. The contents are intended for guidance only.

This data sheet is printed on 9lives 55 Silk, which is produced with 55% recycled fibre from both pre and post-consumer sources, together with 45% virgin ECF fibre. 055-059/06/09 (4)


相关文章:
3充电机的使用操作
英国深海发电机组充电机... 30页 免费 充电机操作规程A 2页 免费3...驾驶员实操测试题姓名: 所属单位: 警衔: 得分: 1、题目名称:充电机的使用 2...
充电机培训资料
坦克车、中小型发电机组上的启动蓄电 池等设备;同时也是蓄电池维修商的必选...(一)充电机使用注意事项 1、电池极性不能接反,否则会损坏智能充电机和电池。...
发电机操作流程1
1#箱变处柴油发电机组操作流程为保证柴油发电机操作的正确性和安全性,保障设备...蓄电池液面高度是否正常,是否已充足电;(有浮充电机的应 该检查充电机工作是否...
柴油发电机蓄电池充电方式有哪些
1:柴油发电机在长时间停放不使用时,蓄电池的电量补充要靠外来充电器 对其充电,...2:平时正常使用的发电机组主要是柴油机上的 24V 硅发充电机源源不断的 给蓄...
大功率充电机
二、大功率充电机 IBCE-2212 产品特性 1、功能设定 A . 可设定恒流充电、恒...5、重量轻,可随意移动测试,一台仪表即可满足变电站发电厂所有容量小于 1000AH ...
蓄电池充电机
风力发电系统、太阳能市电互补发电系统、风光互补发 电系统、风能市电互补发电...1、产品名称:SLP1250 蓄电池充电机 产品名称: 1250 蓄电池充电机 产品说明: ...
KZA系列充电机性能特点及参数
2.智能浮充式充电机:主要用于固定电压和容量的电池作浮充使用的机电设备,如发电...产品技术参数: 1、输入交流电压: 2、额定直流输出电压:每单体 2V 电池充电...
高频充电机与传统整流式充电机对比
高频充电机与传统整流式充电机对比_工学_高等教育_教育专区。1.高频充电机与传统...小型电动车辆上蓄电池用户以及汽车、坦 克车、中小型发电机组上启动蓄电池用户最...
直流充电机更换方案
湖北西塞山发电有限公司检修部 2007 年 3 月 12 日 #2 机组直流充电装置更换...? 拟更换的直流充电屏(单屏)技术条件: 1、三相输入电压:AC 380V±20%、...
柴油发电机组用蓄电池的配制、充电以及有关注意事项
柴油发电机组用蓄电池的配制、 柴油发电机组用蓄电池的配制、充电以及有关注意事项 (1)柴油机出厂时,为便于保存和运输,作为随机附件出厂的新蓄电池均不带电解+液...
更多相关标签:
柴油发电机组厂家 | 发电机组 | 静音发电机组 | 珀金斯发电机组thfdj | 沼气发电机组 | 天然气发电机组 | 珀金斯发电机组 | 柴油发电机组nthehai |