Computerized Flat Knitting Machine with Tandem Capa bility
ADVANCED KNITTING TECHNOLOGY WITH HIGH COST-PERFORMANCE.
The NewSES202-S offers great cost-performance
for entry-level computerized knit production. It is, above all else, a Shima Seiki NewSES machine, the same bestselling series that has sold over 40,000 units worldwide and is considered the de facto standard of the flat knitting industry. With this reputation comes Shima Seiki advanced knitting technology, such as lightweight, compact carriages featuring our famous Knitran? cam system, the patented stitch presser, and takedown device, not to mention Shima Seiki manufacturing quality and service support. Being a NewSES, the 202-S also features a new computer-control unit with a significant increase in pattern memory, standard USB memory interface and network interface for production monitoring and management, an eye-level LCD monitor with graphic interface and improved ergonomics for intuitive operation. The NewSES202-S is also an extremely flexible machine which offers great versatility according to production needs. It is the only NewSES machine with twin single-Knitran? cam carriages which can be used together along the entire width of the needle bed for knitting wide panels in double-system mode, or separated into tandem mode for knitting two identical pieces simultaneously. And should the need eventually ? arise, the world-famous DSCS Digital Stitch Control System is available as an option for even higher quality and consistency in production. Shima Seiki technology, quality and versatility can all be had with the NewSES202-S.
7~12G (14&16G option) option
UltraTandem Lightweight Operation Carriage
Gauge Tough Needle Bed Range
Solenoid Needle Selection
Full Sinker System
DSCS? Digital Knitting
Back-Lit LCD Panel
USB Memory Interface
Average Weight NewSES202-S 1,234kg ( 2,735 lb. )
Actual weight is dependent upon gauge and optional equipment.
2150 2290 3270
All dimensions are in millimeters.
Type Knitting width Tandem width Gauge Knitting speed Stitch density Racking Knitting system Transfer Stitch presser Sinker system Needle selection Takedown device DSCS
NewSES202-S Variable stroke. Max 80" (203cm) 37" (94cm) 2 7 . 8 . 10 . 12 . 14 . 16 Max 1.3m/sec. (16G: 1.2m/sec.) Knitting speed varies according to gauge and knitting condition. Variably adjustable speed levels. 10 additional programmable speeds. 60 levels, electronically controlled. Motor-driven racking mechanism. Max 2-inch racking. 1/2 and1/4 pitch also available from any position. Single KNITRAN
system. Twin carriage.
Simultaneous transfer, front or back, independent of carriage direction. Split stitch. Special motor-driven system allows individual adjustment for on/off in knit and transfer. Programmable press amount. 7~12G : Spring-type moveable full-sinker system1 14 &16G : Fixed sinker2 Full jacquard selection via special solenoid actuators. Main roller : Changeable 31 levels, automatically adjustable on each level. Sub roller : Changeable 31 levels, automatically adjustable on each level. Automatic opening and closing. Option.3 Consistent loop length by digital control method. Left side. Left side yarn feed roller.4 Yarn feed: 8 positions. 8 on each side 12 carriers 16 tension devices. One-touch easy threading. Large knots cause machine stop. Small knots cause 0-9 courses at specified knot detection speed, then automatically resume at set speed. Yarn break, large knot, wraparound check, shock detection, piece count, over- torque, program error, etc. Belt drive. AC servo motor. No lubrication necessary. Special blower operated cleaner. Full safety cover for noise-suppression and dust-proofing with stop motion sensor and interlock mechanism. Stop button. Power supply disconnecting device. Ultra-low speed “crawl” setting. Indicator lamps (see below). Green/normal operation. Flashing green/normal stop. Flashing amber/abnormal stop.
Side tension Yarn carriers Top tensions Stop motion Drive system Cleaner Safety devices5 Operation lamp
Data input Pattern memory Control system Control display Back-up power Power 3.5” floppy disk. USB memory interface. 10/100 BASE -T network. 4,096 addresses) Stored program for flat knitting machine. Monochrome LCD panel. Editing possible via display panel operation. Available in English, French, Italian, Spanish, Portuguese, German, Turkish, Chinese, Korean and Japanese. Power supply for resuming knitting after power failure. 3 phase AC200V 10% 2.0KVA
12,582,912 bits (1,024 wales
? OPTIONS : (1 ) Fixed sinker system (7~12G ). ( 2 ) Spring-type moveable full-sinker system (14 &16G ). ( 3 ) DSCS . ( 4 ) Right side yarn feed roller. ( 5 ) CE Mark.
In order to ensure safe operation of the equipment, please review all operation manuals carefully before use.
Shimatronic, Knitran and DSCS are registered trademarks of Shima Seiki Mfg., Ltd. Shima Seiki maintains a policy of continuous improvement for its products, and therefore specifications and appearances are subject to change without notice. Please contact your nearest authorized sales representative for the latest information.
SHIMA SEIKI MFG., LTD. 85 Sakata Wakayama Japan TEL+81-73 - 474-8210 FAX+81- 73- 474-8270 SHIMA SEIKI EUROPE, LTD.
Sills Road, Willow Farm Business Park, Castle Donnington, Derbyshire DE74 2US U.K. TEL 01332-814770 FAX 01332- 850272
SHIMA SEIKI U.S.A., INC.
22 Abeel Road Monroe Twp., New Jersey 08831, U.S.A. TEL 609-655-4788 FAX 609-655-8463
SHIMA SEIKI MFG., LTD., TAIPEI BRANCH
NewSES202-S Printed in Japan
1F, 30, Lane 583, Ruey Kuang Rd., Neihu, Taipei 114, TAIWAN R.O.C. TEL 886-2-8752-3388 FAX 886-2-8797-5522
URL http://www.shimaseiki.co.jp Email firstname.lastname@example.org