当前位置:首页 >> 机械/仪表 >>

DIN EN 10293-2005 铸钢件材质标准


DEUTSCHE NORM

June?2005

DIN EN 10293
ICS 77.140.80

{
This standard, together with DIN EN 10213-1 and DIN EN 10213-3, January 1996 editions, supersed

es DIN 17182, May 1992 edition, DIN 1681, June 1985 edition, and DIN 17205, April 1992 edition.

Steel castings for general engineering uses
English version of DIN EN 10293

Stahlguss für allgemeine Anwendungen

National?foreword
This copy will not be updated in case of changes! According to DIN reference sheet 7, reproduction of this copy is permitted only for intra-company purposes of SMS Demag AG.

This standard has been prepared by ECISS/TC 31 ‘Steel castings’ (Secretariat: France). The responsible German body involved in its preparation was the Normenausschuss?Eisen?und?Stahl (Steel and Iron Standards Committee), Technical Committee 11 Stahlguss. Amendments This standard differs from DIN 1681, June 1985 edition, DIN 17182, May 1992 edition, and DIN 17205, April 1992 edition, as follows: a) DIN 1681:1985-06 1) Steel grades GS200 (1.0449) and GS240 (1.0455) have been included. 2) Steel grade GS – 52 (1.0552) has been dropped. 3) The steel names have been changed as follows (with the material numbers left unchanged): Designation as in DIN EN 10293 Name GE200 GE240 GE300 Material number 1.0420 1.0446 1.0558 Designation as in DIN 1681 Name GS – 38 GS – 45 GS – 60 Material number 1.0420 1.0446 1.0558

4) Details regarding chemical composition, mechanical properties, heat treatment and welding operations have been amended. 5) The standard has been editorially revised.

Continued overleaf. Document comprises 18 pages.

? No part of this standard may be reproduced without the prior permission of DIN?Deutsches?Institut?für?Normung?e.?V., Berlin. Beuth?Verlag?GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen).

English price group 11 www.din.de www.beuth.de

10.05

9651147

Page 2 DIN EN 10293:2005-06 b) DIN 17182:1992-05 1) Steel grades GS – 8 Mn 7 (1.5015), GS – 8 MnMo 7 4 (1.5430) and GS 13 MnNi 6 4 (1.6221) have been dropped. 2) The steel names and material numbers have been changed as follows: Designation as in DIN EN 10293 Name G17Mn5 G20Mn5 Material number 1.1131 1.6220 Designation as in DIN 17182 Name GS – 16 Mn 5 GS – 20 Mn 5 Material number 1.1131 1.1120

3) Details regarding chemical composition, mechanical properties, heat treatment and welding operations have been amended. 4) The standard has been editorially revised. c) DIN 17205:1992-04 1) Steel grades GS – 35 CrMoV 10 4 (1.7755), GS – 25 CrNiMo 4 (1.6515) and GS – 33 NiCrMo 7 4 4 (1.6740) have been dropped. 2) 16 additional steel grades have been included. 3) The steel names and material numbers have been changed as follows: Designation as in DIN EN 10293 Name G28Mn6 G26CrMo4 G34CrMo4 G42CrMo4 G30CrMoV6-4 G35CrNiMo6-6 G32NiCrMo8-5-4 Material number 1.1165 1.7221 1.7230 1.7231 1.7725 1.6579 1.6570 Designation as in DIN 17205 Name GS – 30 Mn 5 GS – 25 CrMo 4 GS – 34 CrMo 4 GS – 42 CrMo 4 GS – 30 CrMoV 6 4 GS – 34 CrNiMo 6 GS – 30 NiCrMo 8 5 Material number 1.1165 1.7218 1.7220 1.7225 1.6582 1.6582 1.6570

4) Details regarding chemical composition, mechanical properties, heat treatment and welding operations have been amended. 5) The standard has been editorially revised. Previous?editions DIN 1681: 1925-04, 1929-07, 1942xx-03, 1967-06, 1985-06; DIN 17182: 1985-06, 1992-05; DIN 17205: 1992-04.

EN 10293
April 2005

ICS 77.140.80

English?version

Steel castings for general engineering uses
Aciers moulés d’usage général Stahlguss für allgemeine Anwendungen

This European Standard was approved by CEN on 2005-02-14. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.

???
European Committee for Standardization Comité Européen de Normalisation Europ?isches Komitee für Normung Management?Centre:?rue?de?Stassart,?36? B-1050?Brussels

? 2005. CEN – All rights of exploitation in any form and by any means reserved worldwide for CEN national members.

Ref. No. EN 10293:2005 E

Page 2 EN 10293:2005

Page 3 EN 10293:2005

Page 4 EN 10293:2005

Page 5 EN 10293:2005

Page 6 EN 10293:2005

Page 7 EN 10293:2005

Page 8 EN 10293:2005

Page 9 EN 10293:2005

Page 10 EN 10293:2005

Page 11 EN 10293:2005

Page 12 EN 10293:2005

Page 13 EN 10293:2005

Page 14 EN 10293:2005

Page 15 EN 10293:2005

Page 16 EN 10293:2005


相关文章:
材料化性标准
(1000 mg/kg) 根据欧洲测试标 准: 2005/84/EC, §30 LFGB 压缩合成材料(...to标准: § 64 LFGB, B 80.56-1 / DIN EN ISO 15318 (ChemVerbotsV) ...
DIN EN10204 2005 (含3.1合格证)-金属产品——检验证类型
价格分类 8 www.din.de www.beuth.de DIN EN 10204:2005-01 国家标准前言欧洲标准 EN 10204 的修订工作在材料检验(NMP)和钢铁(FES)标准化委员会的积极配合下...
LFGB材料检测标准
LFGB材料检测标准_材料科学_工程科技_专业资料。材质 纸和纸板感观测试 纸制品 ...EN 17353:2005 DIN10955:1983(2003) EN 1186-1,2,3 BS EN 1541-2001 EPA...
各国材料对照表
使用部门: 第 4 页共 7 页 ㈡ 合金铸钢钢号近似对照中 国 GB 德 DIN 国...欧洲标准 EN 材料牌号 命名 EN 10025 1.0038 1.0402 1.0044 S275JR St44-...
DIN标准系列
DIN标准系列_机械/仪表_工程科技_专业资料。一、 DIN...造船用异型件 27 DIN EN 10216-5-1999 压力目的...2014教师资格材料分析辅... 2014小学教师资格考试《...
部分紧固件国家标准与国际标准对照表
部分紧固件国家标准与国际标准对照表_机械/仪表_工程科技_专业资料。部分紧固件...2005 DIN EN ISO 4016 DIN EN ISO 4018 DIN EN ISO 4014 ASME B18.5 1990...
铸铁标准 EN 1561
铸铁标准 EN 1561_机械/仪表_工程科技_专业资料。...(GC35) 德国 DIN 1691W-Nr GG10 0.6010 GG15...铸铁件的其它要求 EN 10002-1 金属材料-抗拉测试-...
堆焊标准
(DIN EN ISO 9606-2-2005 焊工的认可试验) DL/T 681-1999 磨煤机耐磨件...即以低碳铸钢铸造磨辊胎/盘瓦胎基体,采用堆焊 方式将耐磨材料熔覆于基体之上,...
油漆标准
油漆标准_建筑/土木_工程科技_专业资料。德国标准 2005 年 9 月 DIN EN ISO...ISO 3270,色漆与清漆及其原材料 - 预处理和测试的温度及湿度 3 术语 我们将...
德国牌号对应中国牌号的材料对照表
DIN82101 EN10029 SN530 36 37 38 39 40 41 42...(9)铸钢 序号 中国材料 1 ZG200-400 2 ZG230-...德国标准紧固件同ISO和中... 2页 1下载券 德国...
更多相关标签:
din en 10293 | din en 60228 2005 | en10293中文版 | en 10293 | din en iso 9227 | din en是什么标准 | din en iso 9227中文 | din en iso |