Portable Passive Intermodulation Analyzer
The iQA series Passive Intermodulation (PIM) analyzer is a feature rich, high power PIM test solution. This field proven analyze
r enables network operators to improve site performance by finding and eliminating sources of passive intermodulation at the cell site. The design includes an integrated panel PC with intuitive touch screen interface for performing tests and generating site reports. This version of the iQA ships from the factory enabled to support Range to Fault (RTF) technology: with the purchase of an optional RTF module, operators are able to activate RTF mode within the iQA user software to accurately measure the distance to return loss faults as well as the distance to PIM faults at the cell site.
Passive Intermodulation (PIM) Analyzer, Range to Fault (RTF) enabled
RTF module sold separately.
- Rugged, reliable construction suitable for field use - Integrated polycarbonate transit case - Range to Fault (RTF) enabled - Fully configurable frequencies, powers and IM products - Simple to operate touch screen interface - Spectrum monitor, frequency sweep and time trace modes
TECHNICAL SPECIFICATIONS |
Measurement method Residual PIM User interface ports Display Reverse (reflected) PIM, 3rd, 5th, 7th, 9th and 11th order < -115dBm/-158dBc max (<-125dBm/-168dBc typ) (x2 @ 20W) 3x USB, x1 LAN, 1x RF output (7-16 DIN female), 1x monitor port (N female) 8.4in (213mm) touch screen display
Transmit frequencies Frequency increment Frequency accuracy Power per tone (adjustable) Power accuracy (per tone) See model table 50 kHz ± 5ppm (max), aging ± 1ppm (max) after first year 2x 2 to 20W (+33 to +43dBm) ± 0.5dB (max)
Receive band (50kHz steps) Measurement noise floor Measurement range
? 2012 Kaelus. All Rights Reserved.
See model table < -128dBm -50dBm to -128dBm
TECHNICAL SPECIFICATIONS CONTINUED |
Mains power Power consumption 115-230V, 50/60Hz AC 650W
Dimensions Weight Cooling 19 x 18 x 12in (500 x 457 x 305mm) < 50lbs (22.7kg) Forced air
Operating temperature range Storage temperature range Ingress protection (IP) Relative humidity Mechanical shock -10°C to +40°C -20°C to +60°C IP20 (with lid open) IP21 (with lid closed) 5% to 95% RH non-condensing 40G shock rating
iQA-0700LC iQA-0700HC iQA-0790C iQA-0850C iQA-0900C iQA-0901C iQA-1800C iQA-1921C iQA-2101C 700MHz (low) 700MHz (high) LTE800 850MHz GSM900 EGSM900 DCS1800 Dual band PCS/AWS UMTS (3rd & 7th order)
728-746MHz 728-757MHz 791-821MHz 869-894MHz 935-960MHz 925-960MHz 1805-1880MHz 1930-1990MHz/2110-2155MHz 2110-2170MHz
RX RANGE (PIM)
698-716MHz 776-787MHz 832-862MHz 824-849MHz 890-915MHz 880-915MHz 1710-1785MHz 1710-1755MHz/1850-1910MHz 1920-2080MHz
RTF MODULE #
RTF-1000A RTF-1000A RTF-1000A RTF-1000A RTF-1000A RTF-1000A RTF-2000A RTF-2000A RTF-2000A
*Range to Fault is an optional accessory available for iQA test instruments which enables users to measure distance to return loss faults as well as distance to PIM faults. The RTF module is sold separately. WARNING: Use of the portable PIM analyzer in a radiating mode, for example when connected to an antenna not enclosed in an anechoic environment, may be a violation of licensing regulations. Users should have permission in advance, from any licensed operators that might be affected by these tests. Furthermore, radiating high RF power can pose a personnel risk. Specifications subject to change without notice.
iQA with optional RTF module Self contained, ruggedized transport case.
? 2012 Kaelus. All Rights Reserved. iQA_C_RevA_4.12