当前位置:首页 >> 机械/仪表 >>

GMC inspection checklist for impact drill 冲击钻验货


INSPECTION CHECKLIST & REPORT
Type IMPACT DRILL 枪钻

DUPRO
Inspector: 验货员 Item No.: 货号: Product 产品名称 Inspection result:

FRI

RE-FRI
Customer:

客户名称: Factory: 工厂: Quantity: 数量:

Inspection date: 验货日期: Model No.: 型号: Order No.: 订单号 PASS FAIL PENDING 1. 3. Problem Remark Other

验货结果:

2.

Batch Test Result

***********************************************************

Result Summary
Sampling standard per BS6001 Single Sampling Plan Normal level II Sample size Critical Major Minor Defect breakdown Defects: AQL 0 1.0 1.5 Accept Reject Found

Critical

Major

Minor

……………………………………………………………………………………………… ………………………………………………………………………………………………
Total:

Page 1 of 7 Date: 9/10/2013 Version: 1

INSPECTION CHECKLIST & REPORT
Type
1. Palletization 托盘 For GMC Australia 出 GMC 澳洲的产品 1) Must be secured with net 货柜装好后,关门前,必须用网罩防护 sample 样品数 n.a sample 样品数 Results 结果 n.a Results 结果

IMPACT DRILL 枪钻

For KAL products 出翠丰的产品 1) If package weight over than 25kgs, must on pallet. 如果包装重于 25kgs, 必须装托盘 2) Carton or color box must fit the dimension of pallet, no hang out allowed 外箱或彩盒的尺寸必须与托盘相衬, 包装箱不得悬外 3) Shipping mark on pallet correct 托盘上的唛头正确 4) Color box/ carton is packaged tightly to pallet with stretch 外箱或彩盒必须用透明薄膜紧紧地与底下的托盘连在一起

2.

Carton &color box& BMC 包装(外箱, 彩盒, 吹塑盒) Inspection contents 检查内容 1) 2) 3) 4) 5) 6) 7) 8) 9) Color correct 彩盒颜色正确 Content correct 彩盒上印刷的内容正确 Print of content clear 印刷的内容清晰 Shipping mark correct 唛头内容正确(订单号, 货号) Date code format and position correct * 日期码格式和位置正确, PE bag (> 17mcm) with suffocating warning and air holes 尼龙袋上必须有易窒息警告和气孔 Approval marks on color box, manual 彩盒和说明书上印有论证标识 CE/UL/ASS Barcode clear, dimension correct 条码清晰,尺寸正确

sample 样品数

Results 结果

RoHS complaint mark on outer carton and stretched film RoHS 符合性标识必须出现在外箱或在彩盒外面的薄膜上 10) Castoroma color box: order number must be next to barcode 对于出法国 CASTO 的产品,条码边的空格是用来贴订单号的, 日期码就贴在条码周边的空白处。 Note: Date code format for Australia, US and Canada market is: yyww 出澳大利亚、美国、加拿大的产品的外箱的日期码格式是:yyww Date code format for European market is: RyyWww 出欧洲的产品的外箱的日期码格式是:RyyWww

Page 2 of 7 Date: 9/10/2013 Version: 1

INSPECTION CHECKLIST & REPORT
Type
3. accessory 附件 (compared with manual 对照说明书) Inspection contents 检查内容 1) 2) 3)
4)

IMPACT DRILL 枪钻
sample 样品数 Results 结果

Accessories type correct 附件型号正确(包括外径, 长度等尺寸) Accessories number correct 附件数量正确 Accessories can be fixed tightly and reliably 附件与机器的连接容 易,并且紧固可靠 Accessories are free from burs, rust, dust etc.附件干净,无脏物,毛刺 Manual with correct content and color 说明书上颜色内容正确 Silica gel with correct language (N/A for Taiwan) 干燥剂上语言正确 All accessories are fixed in original positon 附件摆放的位置正确 The color of accessories and accessory seat match standard color chips 附件和附件座符合标准颜色要求

5) 6) 7) 8)

4.

appearance & surface check 机器的外观检查 Inspection contents 检查内容 1) 2) Color of the tool is correct 机器的颜色正确。

sample 样品数

Results 结果

Appearance of finished product free from damage, scratch, dirty 成品机器表面有无损伤,刮伤和脏污 3) Rating label with correct content and color, no missing approval mark, approval number, technical parameters etc 铭牌颜色内容正确,认证符合和重要技术参数没有缺失 4) Serial number and date code format on label correct 标签上的序列号和日期码的格式正确 5) No big gap between housing 机壳间的缝隙没有过大 6) Any loose screw or missing screw 螺丝是否紧固, 有无漏装 7) Batch number & Item number on rating label for Hornbach 出 Hornbach 的产品的标签上必须有货号和订单号 8) Check adhesive of print on plastic or metal parts 检查塑料或金属零件上印刷的字体是否粘牢 9) Correct plug for different country 针对不同的国家,插头正确 10) Label on power cord not missing 插头附近电线上的标签无遗漏 Note: Date code format plus serial number for Australia, US and Canada market is: ywwxxxxx Date code for European market is:RyyWww,which is not connected together with serial number 备注:出澳洲,美国和加拿大市场的产品标签上的日期码加序列号的格式是: ywwxxxxx 出欧洲市场的产品的标签上的日期码格式是 RyyWww, 而且不能与序列号连在一起

Page 3 of 7 Date: 9/10/2013 Version: 1

INSPECTION CHECKLIST & REPORT
Type
5. Function inspection 功能检查 Inspection contents 检查内容 1) 2) 3) 5) 6) 7) 8) Switch can be pressed and released smoothly, function ok 开关的开动和放开自由灵活 The vibration, noise and sparkle meet the requirement 震动, 杂音和火花符合客户要求 Speed selector can be rotated smoothly, function is ok 调速旋钮功能正常 The button on switch can be locked. 开关锁定按钮功能正常 The wobbling of chuck meet requirement. 夹头晃动符合要求 Jaws of chuck can be tightened and released after adding drill bit. 夹头能完全夹紧钻头和松开 Impacting and drilling selector can be moved freely, the relevant function ok. 冲击和平钻的转换开关能轻松切换, 相应的功能也正常 The power cord can’t be pulled out by hand. 电源线无松动现象 Motor block toque within safety torque 电钻马达的堵转力矩小于证书上的安全力矩,并记录数据 Cable length 电源线外露长度 2m Check for vibration 检查振动 Check for abnormal noise 检查杂音

IMPACT DRILL 枪钻
sample 样品数 Results 结果

9) 10) 11) 12) 13)

5

Sample s/n

Voltage 电压

No load current 空载电流

No-load speed 空载转速(冷态)

No-load speed after running 空载转速(热态)

Spec: 6. Inner check 开机内部检查 Inspection contents 检查内容 1) 2) 3) 4) 5) 6) Cord fixed tightly inside 检查电源线固定情况 Internal wiring fixed, free from sharp edges and moving parts, no damages 内部导线必须固定,远离尖边,移动的零件,无损伤 No loose parts inside 内部不得有松动的零件 Fan should not rub air deflector 风扇不得擦到挡风圈 No stack rubbing 定转子不得相擦 No rust on field and armature stack 定转子不得生锈

sample 样品数

Results 结果

Page 4 of 7 Date: 9/10/2013 Version: 1

INSPECTION CHECKLIST & REPORT
Type
7) 8) 9) 7. Internal check on plug 插头内部检查 Internal check for Workmanship 整机内部工艺检查 Any missing of components 有无缺失的零件

IMPACT DRILL 枪钻

Critical components inspection 关键零件检查 Components 零件 Power cord 电源线 Fuse 保险丝 Plug 插头 Switch 开关 Capacitor 电容 Internal wire 内部导线 Manufacture/ 生产产家 Marking on part or type 零件上的标识或型号 备注

8.

RoHS & WEEE compliance for European market 对出欧洲的产品检查是否符合 RoHS&WEEE

9.

Test 测试 Test contents 测试内容
1) Endurance test Test criteria: according to EN60745, Item 16,17 HV test after endurance test User life test 实际操作寿命测试 Test condition: Refer to GMC User Test Form 根据 GMC 的要求

sample 样品数 1

Results 结果

2)

1

NOTE: The soft handle and ruler must be assembled during user test.在实际操作中,标尺和辅助手柄装上进行 The smallest and biggest drill bit must be used during test. 在实际 操作中,使用直径最小和最大的两种钻头进行
3) 4) 5) User functional test 实际操作功测试 Drop test (One corner, 2 edges and 6 surface) BMC Latches 吹塑盒的锁栓和搭扣 Open and lock BMC for 100 times 打开关上 100 次 Check for any crack marks and damages on latches and locking button 检查锁栓,搭扣及上下两半的连接处有无裂纹及损伤

3 1 1

Page 5 of 7 Date: 9/10/2013 Version: 1

INSPECTION CHECKLIST & REPORT
Type
6) 7)

IMPACT DRILL 枪钻
2 1

Measure resistance of motor and record 检查电机的电阻并记录 Mechanical strength check 机械强度检查 Unpacked tool drop at 1m height from 3 different position 未包装的裸机分三个不同的方向从 1 米高跌落

Comments on test:

10. Problem remarks 问题描述

Pictures:

11. Informative remarks 参考信息 Information should include: Shipping marks, package, tool, accessories, labels, critical components,etc 参考信息包括:唛头、外包装、整机、附件、标签、关键零件等

Pictures:

Page 6 of 7 Date: 9/10/2013 Version: 1

INSPECTION CHECKLIST & REPORT
Type IMPACT DRILL 枪钻

Page 7 of 7 Date: 9/10/2013 Version: 1


相关文章:
更多相关标签: