Technical Data Jotun 120T640
Product Description Jotun 120T640 is a two-component epoxy repair system for use with Fusion Bond Epoxy products. It is supplied in a cartridge for easy hand
ling, providing accurate proportioning and low wastage.
Application Conditions Jotun 120T640 is easy to use. Squeeze the required amount of material near the patch location. Mix well with a stiff spatula or knife. Smooth the patch to the desired thickness. For best results do not apply below 10°C (50°F).
Operating Conditions Jotun 120T640 is suitable for repairs on lines with continuous high operating temperatures. It may show some discoloration when exposed to higher temperatures.
Storage Conditions A shelf life of at least 24 months is obtained when stored in a temperature range of 4°C to 40°C (39°F to 104°F).
Flash point Viscosity Volume solids Dry film thickness Coverage Mix ratio Packaging Cure @ 5°C (41°F) Cure @ 20°C (68°F) Cure @ 50°C (122°F) Hardness Adhesion Weathering
Tag closed cup
Result 102°C (216°F)
Per cartridge To inspect To handle Full cure To inspect To handle Full cure To inspect To handle Full cure Shore “D” Dolly (20 mm diameter)
Non smooth paste 100% 0.2 - 2.0 mm 0.13 m2 at 2 mm (1.4? ft at 79 mil) 1:1 by volume 400 ml side by side cartridge, 10 per box 2 hours 4 hours 1 – 3 days 45 minutes 75 minutes 5 hours 20 minutes 30 minutes 1 - 2 hours 80 – 88 > 3000 PSI Excellent but chalks
Page 1 of 2
Note: The information on this Product Data Sheet is given to the best of the manufacturer’s knowledge, based on laboratory testing and practical experience. However, as the product is often used under conditions beyond the manufacturer’s control, only the quality of the product itself can be guaranteed. Jotun Powder Coatings reserves the right, without notice, to alter or change the content of this Product Data Sheet. Jotun Powder Coatings. Revised May 2011. THIS PRODUCT DATA SHEET SUPERSEDES ALL PREVIOUSLY ISSUED VERSIONS.
Page 2 of 2