当前位置:首页 >> 机械/仪表 >>

T8 LED日光灯使用说明书1


公司名称及地址

Instruction for T8 LED Tube Light
I. Overview
This product is a highly praised green and energy-saving product in the world, saving energy is up to 60% or more, lifespan is 10 times more than ordinary tube light. The LED tube light is suitable to be used in environments which have high requirements of interior lighting, such as factories, office buildings, supermarkets, schools, enterprises, garages, living houses, or similar ones. With various advantages, such as low power consumption, long lifespan, high light efficiency and brightness, low heat, pollution-free, robust design, etc. The LED is packaged by imported low light decay, super bright chip; choose high temperature and combustion resistant PC case, with resistance to shock and pressure, etc. The shape is similar to traditional tube light, without ballast, no flicker when instant start, easy installation. It is a best choice to replace the traditional tube light.

II .
1. 2. 3. 4.

Important Instructions

Open the package should include: a T8 LED tube light, an instruction, and a replacement fuse. The LED tube light is only used for interior or waterproof lighting(See following figure). Use only in specified nominal voltage and temperature range. This product is suitable to the lamp holder for G13 using inductance ballast, but not suitable to the lamp holder using electronic ballast. 5. Do not disassemble and modify the product. 6. According to installation instruction, install the LED tube light with corresponding specification. 7. The lamp cap is fixed by glue , which cannot be dismantled without being permanently damaged 8 Package does not come with starter. Please purchase the LED starter which comply with the safety regulations before you use this lamp

III .

Installation
In order to better ensure the LED tube light work normally and save energy, please read this manual carefully before

installation. Step 1 Switch off electricity. Step 2 Turn the conventional tube light by 90° . Step 3 Remove the conventional tube light. Step 4 Turn the starter by anticlockwise and remove the starter. Step 5 Click the replacement fuse into the starter holder and turn the fuse by clockwise. Step 6 Insert the LED tube light into the lamp holder. Step 7 Secure the position by turning the LED tube light by 90° . Step 8 Switch on electricity.

90°

-1-

公司名称及地址

保险丝

Connection Method :

Fuse

N

L

LED 驱动 LED Driver

N L

1.Before installing this product,please take off starter;

!
Warning

2.After having installed LED tube,please install incidental fuse; 3.This product cannot be used for electronic ballast.

IV .
1. 2. 3. 4. 5. 6. 7.

Features
High light efficiency, high efficiency, high power factor; Low light decay, low heat, no noise, good color rendering; Fast response, on/off without delay; Long lifespan, up to 20,000 hours; Does not contain mercury and other heavy metals or toxic substances, not use glass, no burst risk; Pollution-free, green and saving-energy; No ultraviolet and infrared radiation, etc, less heat, no mosquitoes around the tube light.

V.

Technical Parameters
600mm

Length Characteristics

L

1200mm

Model Rated Operating Voltage Rated Operating Frequency Rated System Power Power Factor(PF) Luminous Flux(Lm) Color Temperature Operating Temperature Operating Humidity Store Temperature Dimensions Weight Lifespan (Ambient Temperature Ta=25℃)

N
AC100 - 240V 60/50 Hz 8W±15% 15W±15% 18W±15% ≥0.8 ≥0.9 ≥0.9 ≥600 Lm ≥1100 Lm ≥1300 Lm Warm White(WW ) :2700-3500K Natural White(NW ) :3500-5000K Cool White(CW ) :5000-7000 K -20 - 25℃ 10% - 60%RH -20 - 85℃ 604×Φ26mm 1213.6×Φ26mm 1213.6×Φ26mm 220g Ref 340g Ref 340g Ref ≥20,000H

-2-

公司名称及地址

VI .

Dimensions

Specifications Length Diameter

600mm L=604mm Φ26mm

1200mm L=1213.6mm Φ26mm

VII .

Notes
保险丝

连 接 方 式: When using the LED tube light should follow corresponding safety precautions to prevent the risk of fire, electric shock and Connection Method :
Fuse

personal injury. When installing, the using line should be provided with leakage protection, such as the power socket with fuse or
N

the line with ground protection or choose leakage switch and so on.
1.安装本产品之前,请拔掉启辉器; Before installing this product,please take off starter; 2.安装好LED日光灯后,请装上包装附带的保险丝; After having installed LED tube,please install incidental fuse; 3.本产品不适用于带电子镇流器的日光灯灯架; This product cannot be used for electronic ballast.

L

LED 驱动 LED Driver

N L

For lamps with a weight significantly higher than that of the lamps for which they are a replacement, ! attention should be drawn to the fact that the increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact making and lamp retention.
Warning

标签或说明标上类似的内容。

-3-



相关文章:
T8日光灯说明书
LED 3528 日光灯说明书(内置电源式日光灯) 、产品特性: 1、设计新颖: LED 3528 日光灯采用新型 LED 3528 贴片做为光源,超高亮度、光谱纯正、显色指数高、...
T8日光灯作业指导书[1].1
T8日光灯作业指导书[1].1_电力/水利_工程科技_专业资料。江苏安原电器有限...30V,两根表笔线接电源连到 PCBA 上,红笔接 LED+、黑笔接 LED-如右图)。...
T8荧光灯管规格使用说明书
T8荧光灯管规格使用说明书 - 飞利浦 T8 荧光灯管规格使用说明书 产品名称 T8 荧光灯管 规格型号 T8/40W-K 产品尺寸 L*H*W(mm) 1200*25.4 包装数量(PCS...
T8 LED灯管规格书
T8 LED灯管规格书_电力/水利_工程科技_专业资料。T8-4尺 18W LED灯管规格书...電感式鎮流器的燈架: AC AC 1 1 0 /2 2 0 V S ta rte r AC 100-...
T8、T5、T4灯管及LED灯管规格、长度与功率
T8、T5、T4 灯管及 LED 灯管规格、长度与功率以下收集整理灯管参数属性,以方便...T12 灯管的直径就是(12/8)×25.4=38.1 mm T10 灯管的直径就是(10/8)...
T8LED日光灯管系列规格书
LED 日光灯采用超高亮 LED 为光源,外壳为独特的散热铝材结构,和传统日光灯在 ...三、操纵图片说明: T8 支架安装说明(单头进电) 一、安装图: 二、改装说明:...
T8灯管规格书_图文
T824W/40AF-01D T8 日光灯规格书 目 录 (一)产品特性………..3 (二)...采用先进 LED 半导体照明技术,比传统荧光灯节能 70%; ? 采用三安高光效高显...
T8、T5、T4灯管及LED灯管规格、长度与功率介绍
T8、T5、T4灯管及LED灯管规格、长度与功率介绍_电子/电路_工程科技_专业资料。...T12 灯管的直径就是(12/8)×25.4=38.1 mm T10 灯管的直径就是(10/8)...
T8-600和T8-1200LED灯管规格书_图文
T8-600和T8-1200LED灯管规格书 - 产品规格书 PRODUCT SPECIFICATION 客户代码: 产品名称: T8 LED 日光灯管 产品型号: BL-T8-10...
T8日光灯作业指导书.1
作业指导书文件编号:HK—LED—01 T8LED 日光灯 名称 贴片机 静电环 编号 4...1、检查铝基板上的锡膏是否均匀,是否有锡膏与焊盘 发生错位移位现象 2、上机人员...
更多相关标签: