当前位置:首页 >> 信息与通信 >>

DVR017B 英文说明书


English Manual for HD Car DVR017B
Outline
This is an advanced technology, high-definition digital Car DVR, support super wide angle; It is not just an ordinary video recorder but a professional Car DVR. It support TF card, with compact appearance, the high definition video can shooting the smallest details perfectly. The video also can be showed directly on HD LED TV via HDMI cable.

Product Features:
Super wide-angle 230 degrees of the lens 100 million pixels Support 8X digital zoom 2.7-inch HD screen With 6 night vision lights Support motion detection function Support HDMI and AV out put Device with special holder, convenient for installation and use G-sensor recording sensor data and real-time will show on the screen File protected function, when the device is no power or damage during the recording, the video files will be automatically saved. When the car start up, the device will start shooting automatically Continuous loop Video Recording, storage time settable. Can watch video while driving, support real- time playback Saving the time and date, no need to reset when reboots

USB charging function Support TF card up to 32GB Support screen protection function Automatically shut down, when stop recording, the device will shut down automatically.

1. Mode button 2. HDMI out put 3. MENU button 4. AV-OUT 5. OK button 6. Up button 7. TF card slot 8. Power button (long press open the device, short press close the device) 9. USB Interface 10. Down button 11. Microphone

12. 2.7-inch display 13. Bracket hole 14. Reset button 15. Working indicator (Blue)/Charging indicator (Red) 16. Night vision light 17. Camera 18. Speaker hole Up/ Down button: on shooting mode adjust focus; on menu state for menu selection; on playback mode for browsing files; on playback state for fast forward and back forward.. MENU button: when shooting, short press the MENU button to open the G-SENSOR function. Indicator: when open the device the working indicator will light with blue color, when shooting the working indicator will flashing with blue color; when charging the device, the charging indicator will light with the red color, the charging indicator will off while finish charging. OK button: used for shooting; Menu mode, used to confirm the menu settings; in the video replay states, used to start or pause playback. Two charging mode: A) Using built-in rechargeable polymer battery Charging way: 1) connect with car charger, 2) using a USB cable to the computer for charge B) Connect Car charger for charging After the vehicle is started, the machine will automatically enter the recording mode, the machine can be charging while recording. After car is stopped, device will be turn off automatically in five seconds and save the previous files.

You also can manually turn off the camera and the recorded files will be saved automatically. Note: The machine can only be compatible with car charger of output 5V!

Function Introduction.
DVR has the video / playback function. You can choose the correct mode which you need. A) Video mode Short press the power key or connected to the car charger to enter into the video , the DVR enter into the video mode and start video recording (Note: before using, first insert TF card, when the screen prompts "memory error", please use the native format the TF card) . Meantime the red dot showed on the screen top right is flashing, the white digital 00:00:00 showed on the screen top right is changed into red, recording files are stored on the card, when press the OK button to stop recording, the red digital time display white.

B) Playback mode Boot and press the MODE button to enter into the preview mode Preview turned up / down button to select the desired file, press the OK button "Play / Pause, when play, short press up/down to adjust the volume, long press fast forward button to fast and backward button to backward, (Note: Playing the video under playback mode status, the video decoding will be in buffer when fast forward/backward, so there will be a brief pause, which is a normal phenomenon)

USB / PC CAMERA mode:
Connecting the machine to a computer by USB cable, the machine's display will pop up on the

"memory" "camera". Open file of My Computer, it appears removable disk. All files of icons are stored in the DCIM folder in the removable disk; you can copy the files in the machine to the computer. (Note: some video playback software in the computer does not support thumbnail mode, so there are some thumbnails in mess or in green, but it does not affect the video normal playback)

Focus function:
In recording mode, press Up /Down button, press up/down button to adjust the focus multiple (1 times -8 times).

AVOUT / HDMI output:
After power on, please use the A/V or HDMI cable to connect with corresponding interface of the product, the machine will automatically switch to playback mode; meantime the product's screen don't show anything, but LCD TV screen has corresponding show. (Note: AV_OUT and HDMI output can not be used simultaneously, and enter into the playback mode only).

G-SENSOR (the collision sensor function):
After plugging car charging, device will automatically start recording. The gravity sensors will start measuring dynamic and acceleration caused from gravity, and sense direction and vibration from vehicle collision (left - right - front - rear). When serious vehicle collision happens, the G-sensor starts working and the lock icon in white represents that important accident video will be saved together with the video until the record ends, and then return to the normal screen record state. Note: In the event of a serious vehicle collision, the collision sensor starts automatically and save the important recording, which can be used as an evidence of the accident. (This file is not overwritten or deleted). G-SENSOR function is working in a cycle time. After saving the contents happened in the cycle time segment, the icon disappears. It will restart from next time period.

Menu function settings:
Power on and press the Menu button to enter the camera Mode setting interface, Press Up/Down buttons to select the listed settings, press the OK button to enter the set function parameter interface, turn the button and press up / down to select their specific parameter, and finally press OK to exit. 1) Loop Recording: OFF 3 minutes, 5 minutes, 10 minutes 2) Night light: OFF / ON 3) Motion detection: OFF / ON 4) G-Sensor: High, middle, low 5) Recording audio: OFF / ON 6) Time Display: OFF / ON (Time watermark of video recording)

Power on, press Mode button to enter the playback Mode, press the Menu button to enter the Playback Settings interface, press OK button to enter the function parameter interface, and then press Up / Down button to select specific parameter, press OK button to exit. 1) Delete: Yes, Delete All. 2) Format: SD card (select SD card and press ok. Then press up/down to select Cancel/Yes, press ok to confirm). Under Recording Mode or Camera Mode, press the Menu button again, DVR will enter the setting interface, Press up / down button to select their specific parameter, and finally press the OK button to exit. 1) Date / Time: Press up/down button to select the date / time, press OK button to enter the setting

interface, press the Menu button to select the year / month / day / hour / minute / second, press up/down to adjust, finally press OK button to exit. Note: before setting time, press up/down to select: [year / month / day], [date / month / year] and [month / day / year]. 2) Automatic shutdown: off, 2 minutes, 5 minutes, 10 minutes 3) Screen Protection: off, 1 minute, 3 minutes, 5 minutes. 4) Key tone: Off / On 5) Language: English / Simplified Chinese / Traditional Chinese / Japanese / Russian / French / German / Italian / Spanish / Portuguese. 6) Frequency: 50HZ 60HZ 7) TV system: NTSC PAL 8) Default settings: Press the OK button to enter, press up / down buttons to select the cancel / confirm, press the OK button to exit. 9) Version: press OK button to enter, display the current version. Note: 1) When the screen show "memory error", please use the machine to format TF card. 2) Power on, light blue. Blue light flashes when recording; Red light lasting when charging, Red light off when charging full. 3) Under recording Mode, when u choose cycle recording, the device will continue to record when memory card is full. Remark: The camera file will be overwritten one by one. In order to avoid all the old files deleted, the device offers 3 minutes / 5 minutes / 10 minutes for a section for users to choose.

4) "low battery" and icon on the screen occurs when the polymer battery low, and you should charge the machine, or five seconds later, the DVR will automatically save the file and automatically shut down. 5) When you need to reset your DVR, press the RESET button, DVR will automatically reset. 6) Horizontal stripe on the video caused by wrong frequency. Please reset to "50Hz" or "60Hz" according to the local power supply frequency. 7)Make sure about the direction of the TF card, because wrong direction will damage the products as well as the TF card. 8)In order to save battery volume, we can set the screen-off time and automatically power-off time; If there is on operation of the camera, then it will shut down and screen saving. 9) When battery is in low volume, don’t connect the USB cables to computer until the product is fully charged. Otherwise it will cause the product doesn’t work. 10)When the products shut down in low battery volume, it is normal if the machine will shut down automatically when connected with car charger; Then it is quite necessary to charge the machine for a period of time. Specifications: main chip lens Memory Digital magnification Video resolution File Format NT96632 2*NT99141 DDR2 512M 8 1920*540 AVI 1.0 MP

Continuous loop recording Without electricity file recovery

support

support function motion detection function Year, month, day hour, minute support support Build-in SPI Carrier media TF:1GB—32GB English / Simplified Chinese / Traditional Chinese / Japanese / Russian Multi-language support / French / German / Italian / Spanish / Portuguese HDMI AV-OUT support support 1. Charge USB function 2. Memory card rechargeable polymer battery 3.7V 820mAh , Power Car Charger 5V/1200MA

Accessories ? User Manual ? Bracket ? USB cable ? Car charger (including 12V/24V to 5V voltage adapter) ? A/V cable


相关文章:
DVR系列说明书
DVR系列说明书_信息与通信_工程科技_专业资料。嵌入...“通道标题”编辑框,可输入数字、英文字母、标点符号...b) 输入完毕后选择点击键盘上的【确认】【取消】键...
DVR说明书_图文
DVR说明书_计算机硬件及网络_IT/计算机_专业资料。...B 2.6.1 报警输入端口说明 地线 串口发送和接收...英语、波斯语/伊、芬兰、法国、希腊、匈 牙利、...
行车记录仪英文说明书
行车记录仪英文说明书_计算机硬件及网络_IT/计算机_专业资料。行车记录仪英文说明...B) Connect with Car Charger DVR will record automatically when the car ...
行车记录仪英文说明书
行车记录仪英文说明书_法律资料_人文社科_专业资料。Products and Function 1. ...B) Connect with Car Charger DVR will record automatically when the car starts...
DVR说明书(中文版)
说明书适用于最新 DVR 系列数字硬盘录像机 感谢您购买我们的产品。请详细阅读...小学五年级英语教学工作总结 大学教师个人工作总结 小学英语教学教研工作总结©...
DVR使用说明书
DVR使用说明书_信息与通信_工程科技_专业资料。DVR 数字视频监视系统操作手册 数字...亨思特 DVR-260使用说明... 24页 免费 DVR-200B微机励磁控制柜... 36页 ...
H.264DVR 使用说明书201202022_图文
H.264DVR 使用说明书201202022_计算机软件及应用_IT...说明: 英文输入时,空格表示输入空格,退格表示消除...云台解码器 A B 线最远端需要加 120 欧电阻来...
DVR使用说明书
DVR使用说明书_信息与通信_工程科技_专业资料。DVR ...遥控器操作 英文、数字、符号、中文 菜单中对于相同...b) 通过面板【←】、【→】键或鼠标移动定位编辑...
DVR使用说明书
DVR使用说明书_信息与通信_工程科技_专业资料。DVR使用说明书介绍DVR的使用方法目录...双路DVR使用说明书(1) 暂无评价 7页 免费 DVR-200B微机励磁控制柜... 36...
CMS 英文版使用说明书
CMS 英文版使用说明书_计算机软件及应用_IT/计算机_专业资料。CMS 英文版使用说明...V1.0 B、Encode: Set DVR specifications of resolution, FPS, video quality...
更多相关标签: