当前位置:首页 >> 信息与通信 >>

YH-076 样品承认书。。


广州市耀振电子科技有限公司 广州市耀振电子科技有限公司
PRODUCT SPECIFICATION FOR INFORMATION
触摸屏承认书

品名/Product Name: 机种名/Part Number: 客户名称/Customer: 客户料号/Customer P/N: 日 期/Date:

8.0"touc

h panel

YH-076

2010-07-27

Approved

by

Checked by
喻白唯

Designed by
万奋翔

客户确认/Customer approve: Approved by DATE

广州市番禺区钟村耀振电子加工厂 电话: 020-34710365 手机: 13316187848 传真: 020-34710426

13923793834

CONTENTS 目录 1.操作注意事项 Operation Instructions: . :
1-1 注意事项 Caution 1-2 制品使用注意事项 Safety Notices 1-3 有关构造的注意事项 Notices on the structure 1-4 电气规格,软件注意事项 Notice on electronics and software 1-5 安装设计注意事项 Notice of Design installation 1-6 保证 Warranty 1-7 出货检验事项 Notices on quality control 1-8 包装方式 Packaging

2.范围 Scope . 3.外形 Structure .
3.1 结构 Structure 3.2 外形尺寸 Shape dimension

4.特性 Feature .
4.1 使用、保存环境 Conditions of use and storage 4.2 电气特性 Electrical property 4.3 机械特性 Mechanical property 4.4 光学的特性 Optical property

5.外观检查 Appearance Inspection .
5.1 检查规则 Inspection Criteria 5.2 检验基准书 Inspection standards 5.3 线状缺陷 Line defect 5.4 点状异物 Pin defect 5.5 Film 表面没有折伤 Film surface no fold shall exist. 5.6 牛顿环/干涉线 Newton ring/Interference fringes.

5.7 凸出(包括波状弯曲)Bulge (undulation included) 5.8 Film 表面:鱼眼 Film surface: Fisheye 5.9 玻璃毛屑和裂缝 Chip and Crack of glass 6.信赖性测试 Reliability Test . 6.1 环境实验 Environmental test 6.2 耐久试验 Durability Test

1

7.附档 Reliability Test 附档

1.操作注意事项 Operation Instructions: 操作注意事项
1-1 注意事项 Caution
本制品适用于一般标准性产品(如:OA 事务机器、通信、机器设备及家用电器产品).若因故障或 错误动作,所导致的对人体产生直接危害时,请停止使用,再者,亦请避免使用于需达到高度信赖性标准 的特殊用途上,如,航天科技,原子动力控制器,与维系生命用之相关医疗器材等特殊产品.

This product is suitable only for equipment of common usage (for example, office-auto equipment, machines or related to business communication , and home electronics).when damaged or misused which may cause body injury, please stop using .Also, do not use on special equipment of extremely High-reliability standard, such as space sciences, nuclear power controller or health care equipment. 制品使用注意事项 1-2 制品使用注意事项 Safety Notices
1-2-1 请勿以锐利刀刃或其它尖锐制品在本制品上磨擦

Don’t scratch or rub with knives or other sharp substances
1-2-2 请勿任意拉扯或弯折本制品

Don’t scratch or bend
1-2-3 请以包装箱包装,并控制其存放处室温,同时亦需注意切勿在箱上堆栈其它物品.

Use cushioned package when packing. Keep at room temperature and avoid stacking on top.
1-2-4 请勿将产品堆叠放置以免引起表面刮花造成外观不良

To avoid scratch surface of product ,so don’t pile product.
1-2-5 请避免将本制品靠近或暴露于有机溶剂,酸性气体的环境下使用及存放

Keep away from surface of product ,so don’t pile product
1-2-6 请勿任意剥离或扯解本制品

Don’t detach the surface or dissemble the product
1-2-1 请勿拉其尾端(FPC)以提起本制品,应以提起制品本体为正确的方式.

Do not lift by the FPC. lift by the product
1-2-7 为保证产品的清洁度,请在拿取产品之前戴好干净的指套或防静电手套

To avoid dirty or smear on surface, please wore clean fingertip or anti-static glove when lift product
1-2-8 制品上有污沾时,请柔质绵布或沾有中性洗济,酒精的布料轻试,若不慎有刺激性药品附着于制品上 时,在不影响人本健康状态下,请迅速擦拭..

2

To remove dirt or smear on the surface ,use linen with ethanol or soft cotton and gently wipe off. For irritating substances, immediately wipe off it doesn’t affect personal health. 1-3 有关构造的注意事项 Notices on the structure
1-3-1 本规格书中所列的环境特性,机械特性,电气特性等等的试验,仅对制品的动作区域范围加以保 证。

The tests on the environmental ,mechanical and electronic characters of this product listed in the Specifications are only guaranteed with in the product active area
1-3-2 请避免在结露状态下使用本制品。 由于结露是自然现象, 故制品内部产生结露时, 并非异常, 1-3-3 当接近室温时结露状况会自然消失,在结露状态下使用本制品则易有故障的情况发生。

Avoid using under dew condensation . Dew condensation is natural, and it is not abnormal if it happens in the product .the condensation will disappear when the temperature rises closes close to room temperature .Usage under dew condensation may cause mistakes or problems. 1-4 电气规格,软件注意事项 Notice on electronics and software 电气规格,
将上下电极导通,再以物指或笔尖施压后产生回路阻抗,等阻抗值稳定后才能读取数据资料。

Connect the upper and lower electrodes ,and press with finger or pencil or produce to produce surface them there is loop resistance impedance .Read the data only when the impedance value is stable

1-5 安装设计注意事项 Notice of Design installation 1-5-1 应避免模具外壳直接压在动作区上,为避免有误动作,模具外壳与触摸屏表面
应留有一定空隙(一般在 0.20mm~0.30mm 之间).如下图所示:

Avoid the design that Front-case over lap and press on the active area of the touch panel. Give enough gap(0.20mm~0.30mm at compressed )between the front Case and touch panel to protect wrong operating.

3

面 Front case 壳 min 0.20-0.30mm 膜 Film 玻 Glass 璃 触 屏 摸 Touch Panel

A/A
1-5-2 为了保护屏和避免误操作,在触摸屏与外壳之间使用一缓冲物(垫圈) ,应避免把外壳内
边缘设计在可视区以内,压在可视区与作动区之间易造成误动作。

Use a buffer material (Gasket) between the touch panel and front-case to protect damage and wrong operating. Avoid the design that buffer material over lap and press on the inside of touch panel viewing area.

缓冲材料(垫圈) Buffer material(gasket) 机壳 Front case 胶带 Adhesive tape 触摸屏 Touch Panel 膜 Film 玻璃 Glass 面壳 Front case A/A Max 0.5mm Min 0.5mm V/A

垫圈 Gasket

1-5-3 考虑产品安装时不至于有倾斜现象,建议贵方在设计机壳时,将边角四周设计成“R”角的形
式来固定产品,这样不会对产品四角施加压力

The corners of the product are not tipped when installing to case, so, we suggest that the corner may be designed R part of case so as not to apply

4

外壳 Casel

触摸屏 Touch panel

1-5-4 在设计机壳与触摸屏组装时,应考虑到机壳内侧与触摸屏最好间距要在 0.20mm~0.30mm 之
间。

When design case for installing touch panel, you would consider give a distance between touch panel edge to case inside.
机壳 Case 触摸屏Touch panel

LCD

0.20-0.30mm

1-6 保证 Warranty
1-6-1 产品保证 Product warranty 1-6-1-1 保质期限以交货后一年为限。但外观不良等之初期不良的交换则以交货后一个月内为限。

This product is warranted for one year from date of original purchase. However, those defects such as appearance are only warranted for exchange within the first month from the date of original purchase.
1-6-1-2 在保质期限内,顾客正常使用状态下所发生的故障,需经本公司做产品不良分析实验后判定为 本公司的缺失时,则立即以换货处理。

During the warranty time, defects that happen under the normal usage will be tested by Arayon Optics on defect analysis test. We will exchange the product when it is our fault.
1-6-1-3 换货时,有时会以不同料号所做的产品交换的情形.

5

The exchanged product may be manufactured by parts or materials of lot numbers different from the original
1-6-2 保证对象 Warranty coverage 1-6-2-1.仅限交货制品为保证对象,并不含因交货品之故障所引发的其它损害,同时,请容许在当地 作维修产品的处理与良品交换。

Warranty only covers the product purchased ,not for the damage or injury caused by the product .please allow local product operation or exchange.
1-6-2-2.对于延迟交货或产品发生不良等状况,本公司必定全力配合解决。

We will try every effort to solve the in case of delayed delivery or defected product .
1-6-2-3.本制品由于其构造上的特殊,无法修理,仅能以交换良品来处理。

because of the special character of the product ,no repair will be made . Exchange only

1-6-3 赔偿保证 Compensation notices 本公司保证事项并不包含下列各项:The following are not included in this warranty:
1-6-3-1.运送途中,移动中产品掉落,或遭撞击,而产生故障或破损的情形。

Damage or misshape caused by falling or bumping during transportation
1-6-3-2.因为天灾,火灾造成的故障或破损。

Damage or misshape caused by natural disasters or fire
1-6-3-3.因静电导致的故障或破损

Damage or misshape caused by static
1-6-3-4.因组装至其它机器内所发生的故障或破损

Damage or misshape caused by during assembly into other equipments
1-6-3-5.自行改造,分解,修理本制品者

When the product is reconstructed dissembled or repaired by personnel other than Arayon Optics
1-6-3-6.液晶屏幕与本制品贴合处黏着胶有裂开的情形

The crack on the glue which attach the LCD and this product
1-6-3-7.使用上违反操作注意事项所产生故障或破损者

Damage or misshape caused by misusage.

1-6-4 治具 Notices on Moulds CAD 数据(已承认之图面除外),网版,模具等各项治具在管理是不便让与,敬请见谅。 CAD data (except for those approved drawings),screen-printing moulds and other testing moulds will not be provided of management policy.

6

1-6-5 变更事项 Notices on changes 1-6-5-1.在制作工程上尺寸,走线或尾端(Tail)部位置需做大幅变更时,相对亦有增加其开发费用的 情形,因此请务必注意图面承认。

If major changes are needed on manufacturing, size ,wire ,circle or FPC position ,the development expense may be increased .Approved drawings are required under this circumstance .
1-6-5-1-2 .Film,玻璃,印刷,胶材料与走线,请允许在不影响规格书测试规范下做变更。

Please allow changes on film ,glass ,printing-materials and wire routing , when it doesn’t affect the test specifications in the Specifications
1-6-5-1-3.关于本公司规格品,为提升品质,会有直接变更规范条件而不事先通知的情形。

For the standard products ,to improve the quality ,there may be circumstances that we change the test condition without noticing in advance 1-7 出货检验事项 Notices on quality control
每批交货实施下列检查,并附检查报告:

Every batch of product will be tested on the following ,and the test report will he attached:
1-7-1 外观 Appearance 1-7-2 操作压力测试 Operation pressure test 1-7-3 电气特性 Electronic characters 1-7-4 回路阻抗 Loop resistance

1-8 包装方式 Packaging
完成品,为求搬运中不受损伤为原则,用适合的包装箱包装之。

Pack the product with cushioned packages to avoid damage during transportation .Detail see packing drawing .

7

2.范围 Scope .
本规格书为明确规范本公司产品模拟式触控面板性能而订定,当本规格书与其它个别规格书内容 有抵触情况发生时,仍以本规格书标准为最优先。本规格书内容如有项目不足或内容需要变更时, 须经过由会议讨论后另订之。

This specification defines performance to input surfaces for our transparent analog touch panels. In the event of a conflict between this specification and applicable individual specification, this specification takes precedence. Items missing from this specification are to be decided subject to discussion.

3.外形 Shape .
外形、结构和尺寸详见图纸

Shape ,structure and dimension are referred to attached drawing-file

3.1 结构 Structure

Construction
结构

Materials used
所用材料

Comment
注释 雾面防牛顿环导电薄膜,厚度 0.188mm

Top Circuit
上线

雾面防牛
Adhesive 粘胶

Circuit spacer
线键

Thickness:0.05mm
厚度:0.05mm ITO Glass with Anti-reflection;

Bottom Circuit
下线

Glass 玻璃 FPC

Thickness: 1.1 mm
玻璃,厚度:1.1mm

Tail type 引线
3.2 外形尺寸 Shape dimension

Connector thickness: 0.3mm
端子厚度: 0.3mm

(L=long 长; W=wide 宽; T= thickness 厚)

Item 项目 Dimensional Outline 外形尺寸 View Area 可视区 Active Area 驱动区 Spacer dots: dimension & pitch
绝缘点大小及点距

Specifications 规格
192.7(L)×116.8(W)×1.45T) 182.64(L)×105.36(W) 174.64(L)×97.36(W) φ0.06+0.02 ,2.5×2.5 -0

Unit 单位
mm mm mm mm

8

4.特性 Feature 特性
4.1 使用、保存环境 Conditions of use and storage 使用、 项目 Item Value(condition) 值(条件) 湿度 20℅~90℅: 不可有结露 操作温度:-20℃~70℃ 储存温度:-30℃~85℃ Humidity: 20℅~90℅ non dew condensation Operation Temperature: -20℃~70℃ Storage Temperature: -30℃~85℃ 备注 Note

使用温度范围

Temperature range upon operation

单体状态下 In a simple substance

4.2 电气特性 Electrical property 项目 Item 最大电压 Maximum voltage 端子间阻抗 Value 值 直流 7.0V DC7.0V X 方向(Film 面) :600~1000 X direction[Film side]: 600~1000 Y 方向(Glass 面) :200~600 Y direction [Glas side]: 200~600 X 方向:1.2℅以内 Y direction :within±1.2℅ Y 方向: 1.2℅以内 Y direction: within±1.2℅ Note 备注

Resistance between terminals
直线性

Linearity

测试方法如图所示 Testing method as fallowing drawing

V

Measured Volume:Vx
X-Axis

Vx

A

B

Ldeal Volume:Vp A Positions B

Y-Axis

绝缘阻抗 Insulation resistance 响应速度 Chattering 额定电压 Rating

直流 25V 20M 以上 DC 25V 20M above

连接 X + ~X-和 Y+ ~Y-,使用 25V DC 在 X 和 Y 测试。 Connect X + ~X- and Y+ ~Y-, apply 25VDC Between X and Y for perform measurements 15 毫秒以下 15 ms below 电压直流 5V DC 5V

9

4.3 机械特性 Mechanical property 项目 Item 入力方法 Input method Performance 性能 用专用笔或手指触控 Used of an exclusive pen or finger 使用笔来进行操作或测试时,其笔尖端 材质必须符合以下条件: 笔尘材质:Polyacetal(聚纤维酯) 笔 端:笔径 ∮3.0 mm 、表面弧 度 R 0.8 mm Operation and measurement with a pen must be carried out under the following tip conditions: Stylus pen material : POM (ployacetal) Tip : Diameter 3.0mm, SR 0.8 mm 必须利用特定物质来代替手指进行操作和 测试,其材质必须符合以下条件 Operations and measurement methods simulated for a finger must be carried out under the following tip conditions: 材 质:硅橡胶印(硬度:SHORE A 30 度) 顶 端:笔径 ∮12 mm、表面弧度 R 12.5 mm Material : Silicon rubber ( Hardness : 30°Hs ) Tip : Diameter 12.0 mm, SR 12.5mm 依据 JIS K5400 试验方法 It complies with the way of test method JIS K5400. Note 备注

专用笔 Exclusive pen

20~100g

动作荷重 Load upon operation 手指输入 Finger

20~100g

表面硬度 Surface hardness

铅笔硬度:3H Pencil hardness : 3H

备注:由绝缘点的大小及间距来决定操作压力的大小。 Note:The force depending on diameter & pitch of spacer dot. 4.4 光学的特性 Optical property

Item 项目 Total light transmittance 全光线透过率 雾值 Haze Film 规格 Film specification

Performance 性能 75% 以上 75% above 8% 以下 8% below 雾面,有一定表面硬度 Polished type with hard coated surface

Note 备注 JIS K7105 JIS K7136

10

5. 观检查 Appearance Inspection .
5.1 检查规则 Inspection Criteria

项目 Item

条件 Conditions
应用区域:可视区 Application Area; view Area ﹡所有外观不良只要是在可视区以外对产品功能不造成影响均不考虑在 内 Any defects in invisible shall be ignored unless they affect electrical performance. ﹡所有可以使有用软布用酒精擦拭得掉的污染均不考虑在内 Contamination that can be cleaned using sift cloth with ethyl alcohol does not apply to these visual criterion. 视力 1.0 及以上的健康成人(带眼镜亦可),物体与检测者眼睛距离 20 到 30 厘米处检 测。 The inspection should be conducted by a healthy inspector having a vision of 1.0 or above (eyeglasses acceptable), and at the distance 20 to 30 cm between the object and the inspector’s eye 使用机器:荧光灯 30W;照明条件:明室下 1000LU 以下 Inspection device: florescent light 30 W; Illumination condition: less than 1000(lu) in a bright room
Eyes

备注 Note

检查范围 Inspection area

检查条件 Inspection Conditions

检查方法 Inspection Environment

Touch Panel Lamp 30(±10)cm
Approx.60°

Eyes

Lamp

Glass

Film

Touch Panel

5.2 Inspection standards 检验基准书 产品可视范围外若没有因裂缝,刮伤,异物等外观不良影响产品电气特性的,也可接受。 For areas outside the visible range, it is acceptable if there is no crack, scratch, or foreign objects that can greatly affect the electric performance of this product. 该范围用于本基准未描述到的裂缝,刮伤或者异物等外观不良。 Limit samples shall be used for cracks, scratch, or foreign objects which are not described in this standard. 5.3 线状缺陷(W=宽度、L=长度) Line defect (W=Width, L=Length) 线状缺陷( 宽度 宽度、 长度 长度) 宽度 Width (mm) W≦0.03 长度 Length (mm) L≦15

基准 Standards 不计 To be disregarded

注意 Remark

11

0.03﹤W≦0.06

L≦5

两个以上线状缺陷(若 2 个间距离小于 20mm, 不可) Up to two defects, with the failure under distance 20mm 不接受 None

W﹥0.06

L≦5

5.4 点状异物 (D = 长径)Pin defect (D = longest diameter) 长径) 平均直径 Average diameter(mm) D≦0.1 0.1﹤D≦0.15 0.15﹤D≦0.2 D﹥0.2 基准 Standard 不计 To be disregarded 最多 4 个 MAX 4 pieces 最多 2 个 MAX 2 pieces 不接受 None

点状异物

注意 Remark

2 个以上缺陷距离大于 5mm 不 按受 Up to two total defects

5.5 Film 表面没有折伤 Film surface no fold shall exist. 5.6 牛顿环 / 干涉线 Newton ring / Interference fringes 根据 5.1 外观检查方法确认 To be confirmed according to No. 5.1 inspections of appearance 外观牛顿环限定个数 Appearance Inspection Limit simple: 项目 基准 备注 Item Standard Notes 在整个触摸屏检查区域内超过 1/9 范围;不接受 The area covered by Newton Ring is more than 1/9of the whole TP surface; Reject 常规 在整个触摸屏检查区域内小于 1/9 范围,并且在有照明环境下不影响透 Regular 光率及失 真;接受 The area covered by Newton Ring is less than 1/9 of the whole TP surface, and it does not affect transmittance and clarity of TP under the lighting ambient. 在整个触摸屏检查区域内在照明环境下超过 1/9 范围;不接受 The area covered by Newton Ring is more than 1/9 of the whole TP surface under the lighting ambient ; Reject 在照明环境下牛顿环有影响清晰度和透光率; 不接受 (不计牛顿环尺寸) 例外 If the Newton Ring affect the transmittance and clarity under lighting Irregular ambient, it is NG (Regardless of the Newton Ring size) 在整个触摸屏检查区域内小于 1/9 范围, 并且在有照明环境下不影响透 光率及失 真;接受 The area covered by Newton Ring is less than 1/9 of the whole TP surface, and it doesn’t affect transmittance and clarity of TP under the lighting ambient; Accept

12

5.7 凸出(包括波状弯曲)Bulge (undulation included)
膜鼓起在 0.2mm 高度范围内判定为合格品。 The ITO film plumped below 0.2mm, it’s ok.
Product 0.4mm or bolow 0.4mm 以下

凸起(包括波状弯曲)

5.8 Film 表面:鱼眼 Film surface: Fish eye
平均值 Average diameter (mm) D≦0.20 0.10﹤D≦0.20 0.20﹤D≦0.40 D﹥0.40 基准 Standard 不计 To be disregarded 最多 6 个 MAX 6 Pieces 最多 2 个 MAX 2 Pieces 不接受 None 注意 Remark

5.9 玻璃毛屑和裂缝( t =玻璃厚度)Chip and Crack of glass (t=glass thickness)
项目 Item 尺寸 Size (mm) 长度 Length (mm) X ≦3 接受个数 Acceptable Qty O 片:若有任何一个毛屑 或裂 缝超过所给的 X,Y,Z 值,则 不接受。 0 pcs: Judge unacceptable if there is any one chip or crack exceeding the permissive value of X, Y, or Z. O 片:若有任何一个毛屑 或裂 缝超过所给的 X,Y,Z 值,则 不接受。 0 pcs: Judge unacceptable if there is any one chip or crack exceeding the permissive value of X, Y, or Z. 每边 2 个或更少;它们要 小于 所给的值。 Two or less for each side: Those less than these values.

角 Corner

Y

≦3

角Comer
Z ≦t

X

≦6

角以外的地 方 Other than corner

角以外的地方Other than corner

X

Y

≦2

Z

﹤t

13

进行性的裂 缝 或者毛屑 Progressive Crack or chip

O 片:若有任何进行性的裂缝或毛屑,不接受。 0 pcs: Judge unacceptable if there is any progressive crack or chip.
进行性的裂缝或者毛屑Progressive Crack or chip

6.信赖性实验内容 Reliability Test .
6.1 环境实验 Environmental Test 项目 Item 高温保存 High temperature preservatio n 内容 Contents (1) 温度 85℃,放置 240 小时;(2)室温放置 24 小时以上;(3)然后测量以下 项目:不可有结露 (1) Store at 85℃ for 240 hours; (2) Keep at a room temperature for more than 24 hours; and (3) Measure (satisfy) the following items: no dew condensation 端子间阻抗:参照电气特性栏 Resistance between terminals: see electrical property item; 直线性:参照电气特性栏 Linearity: see electrical property item;绝缘阻抗:参照电气特性栏 Insulation resistance: see electrical property item. (1)温度-30℃,放置 240 小时;(2)室温放置 24 小时以上;(3)然后测量以下 项目:不可有结露 (1) Store at-30℃ for 240 hours; (2) Keep at a room temperature for more than 24 hours; and (3) Measure (satisfy) the following items: no dew condensation 端子间阻抗:参照电气特性栏 Resistance between terminals: see electrical property item; 直线性:参照电气特性栏 Linearity: see electrical property item;绝缘阻抗:参照电气特性栏 Insulation resistance: see electrical property item. (1)温度 80℃ 湿度 90%,放置 240 小时;(2)室温放置 24 小时以上;(3)然后 测量以下项目:不可有结露 (1) Store at 80℃ and 90% RH for 240 hours; (2) Keep at a room temperature for more than 24 hours; and (3) Measure (satisfy) the following items: no dew condensation 端子间阻抗:参照电气特性栏 Resistance between terminals: see electrical property item; 直线性:参照电气特性栏 Linearity: see electrical property item;绝缘阻抗:参照电气特性栏 Insulation resistance: see electrical property item. (1)-30℃(60 分)→70℃(60 分)共 10 次循环;(2)室温放置 24 小时以上; (3)然后测量以下项目:不可有结露 (1) -30 ℃ (60min) → 70 ℃ (60min) total 10 cycles, (2) Keep at the room temperature for more than 24 hours; and (3) Measure (satisfy) the following items: no dew condensation 端子间阻抗:参照电气特性栏 Resistance between terminals: see electrical property item; 直线性:参照电气特性栏 Linearity: see electrical property item;绝缘阻抗:参照电气特性栏 Insulation resistance: see electrical property item. 注意 Notes

低温保存 Low Temperature preservation

高温高湿保 存 High Temperature & high humidity

冷热冲击测 试 Heat shook test

14

6.2Durability Test 耐久 项目 Item 内容 Contents (1)使用 Placental(POM)铅笔(R0.8) 敲击 100 万次。 (2)然后测量以下 项目: (1) Hit 1,000,000 times with a Placenta (POM) pencil (R0.8); and (2) Measure (satisfy) the following items: 荷重:2N Load:2N 速度:2 次 / Sec Speed: 2times/sec 端子间阻抗:参照电气特性栏 Resistance between terminals: see electrical property item; 直线性:参照电气特性栏 Linearity: see electrical property item; 绝 缘 阻 抗 : 参 照 电 气 特 性 栏 Insulation resistance: see electrical property item. (1)使用 Placental(POM)铅笔(R0.8)在 AA 区域边缘内缩 3mm 往复划 线性 10 万次;(2)然后测量以下项目: (1) Shuttle 100,000 times with a placenta (POM) pencil (R0.8) shrinks 3mm from the AA verge; and (2) Measure (satisfy) the following items: 荷重:2N Load: 2N 速度:100mm / Sec Speed: 100mm/Sec 端子间阻抗:参照电气特性栏 Resistance between terminals: see electrical property item; 直线性:参照电气特性栏 Linearity: see electrical property item; 绝 缘 阻 抗 : 参 照 电 气 特 性 栏 Insulation resistance: see electrical property item. 注意 Notes

耐敲击 Hitting Durability

耐久划线 Sliding Durability

(1) 在 FPC 末端附上 100g 力;(2)接着以附着力的部分作不弯曲中心(各 弯 曲 180 度 5 回)。结果应该满足以下几项: (1) Attach a 100g weight to the end of FPC; (2) Bend the FPC at the angle Of ±180°each for the 5 times, with the FPC adhered portion as the center FPC 弯曲 of bending movement. FPC Bending The result shall satisfy the following: Durability 端子间阻抗:参照电气特性栏 Resistance between terminals: see electrical property item; 直线性:参照电气特性栏 Linearity: see electrical property item;绝 缘阻抗: 参照电气特 性栏 Insulation resistance: see electrical property item.

ITO FILM

ITO GLASS

F

F

FPC

F F=100g

15

(1) 垂直 90°方向:500g 力 5 分钟;不可剥离;应满足以下几项: 端子间阻抗:参照电气特性栏; Vertically 90°direction: After 0.5Kg 5min there is not peeling; The result shall satisfy following items:

ITO GLASS

FPC 拉力测 试 FPC Heat Seal Peeling Testing

ITO FILM

FPC

F F=0.5Kg

(2) 水平 180°方向:500g 力 10 分钟;不可剥离;应满足以下几项目: 端子间阻抗:参照电气特性栏; Horizontal 180°direction: After 0.5Kg 10min there is not peeling; The result shall satisfy following items: Resistance between terminals: see electrical property item

FPC 耐弯曲 性 FPC pattern Bending resistance 金手指处焊 接性 Gold-finger sold heat

弯曲半径为 7mm,拉伸长度=25mm,速度为 1500rpm;弯曲次数为 10 万次,就满足以下几项目:参照电气特性栏; Bending 100,000 times by radius 7mm, length of peeling stroke 25mm, Speed 1500rpm; the result shall satisfy following items: Resistance between terminals: see electrical property item 温度:235+/-5℃;时间:3-5 秒:焊点光滑圆润 Temperature: 235+/-5℃; Time: 3 – 5 sec, sold-dot smooth surface

16

X2

Y1

Y2

X1

1 23 4



7.附档 附档

17


相关文章:
YH-076 样品承认书。。
包装样品承认书 1页 免费Y​H​-​0​7​6​ ​样​品​承...8.0"touch panel YH-076 2010-07-27 Approved by Checked by 喻白唯 Designed...
样品承认书模板
样品承认书模板_电子/电路_工程科技_专业资料。样品承认书 FOR APPROVAL 物料编号 Part NO.: 物料名称 Part Name : 物料型号 Part MODEL: 机型型号 Aircraft ...
样品承认书标准格式
样品承认书标准格式_表格类模板_表格/模板_实用文档。样品承认书标准格式 樣品承認書 百瑞立品號:___ 品名:___ 廠商品號:___ 顏色:___ 材質:___ 規格/...
样品承认书标准版
样品承认书标准版_销售/营销_经管营销_专业资料。样品承认书是制造业企业用以约束供需双方关于产品品质检验标准达成共识的书面辅助法律性文件,以利于双方正当权益的...
新样品承认书(范本)
样品承认书(范本)_专业资料。样品承认书 深圳信立电子科技有限公司 样品承认书 SPECIFICATION FOR APPROVAL 客户名称: ★ Customer 客户编号: ★★★ Descriptio ...
样品承认书标准版
茂腾精密模具(上海)有限公司样品承认书 SAMPLE SPECIFICATIONFOR APPROVAL 客户名称/Customer Name: 品牌名称/Brand Name: 订单编号/Order Number: 订单数量/Order ...
样品承认书(超完美)
样品承认书(超完美)_表格类模板_表格/模板_实用文档。样品承认书范本深圳裕佳康精密科技有限公司 ShenZhen YJKON Co., Ltd 内部公开 Internal Use 样品承认书 FOR...
样品承认书
承认 APPROVED BY 检查結果 INSPECT RESULT 说明 REMARK: □ 合格 ACCEPT □不...YH-076 样品承认书。。 18页 免费 包装样品承认书 1页 免费 ©...
-样品承认书
-样品承认书_电子/电路_工程科技_专业资料。产品规格书客户 名称(SUSTOMER): 客户...YH-076 样品承认书。。 18页 免费 样品承认书标准版 4页 免费 样品承认书...
样品承认书封面
样品承认书封面_表格类模板_表格/模板_实用文档。产品与客户沟通确认承认书文件,项目工程师专用 供应商名称:XXXX 模具有限公司 产客户名称 Client Name: 品牌 Brand...
更多相关标签:
样品承认书范本 | 样品承认书封面 | 样品承认书格式 | 样品承认书模板 | 供应商样品承认书 | 塑胶产品样品承认书 | 电子元器件样品承认书 | 塑胶样品承认书范本 |