当前位置:首页 >> 机械/仪表 >>

cncKad


Upgrading Your HASP to v. 9.0
This document explains how to upgrade your HASP Plug (Dongle, Key, Hardlock, etc.) so that it is prepared for installing and using cncKad version 9.0 : Pre-

requisites for Upgrading......................................................................... 1 Before proceeding ........................................................................................ 1 Use the following procedure to upgrade ....................................................... 2 After installing v. 9.0 ..................................................................................... 4

Pre-requisites for Upgrading:
To upgrade you must have a USB Plug, and your Serial Number (see below) must be higher than 3920. This is not the case when: o You have a Parallel Plug (can be white, blue, black or red) -

o You have a USB Plug but the Serial Number is lower than 3920, e.g. 1850. In these cases you must replace your Plug. Contact your dealer to do so.

Before proceeding:
Download the following three programs and save them to your My Documents folder. For each link right-click, select “Open Hyperlink” (or “Open weblink in browser”) and then “Save”: o o o HASPUserSetup.exe cncKadKeyUpdate.exe FirmwareUpdate.exe Then

For example, downloading cncKadKeyUpdate.exe :

-1Upgrading Your HASP to v. 9.0

Use the following procedure to upgrade:
1. Open your Options program (start => All Programs => Metalix => Tools => Options 8.5 ) and note your HASP Serial Number, 8150 in this example :

2. Run the HASPUserSetup.exe file you just downloaded (to My Documents) and follow the installation instructions. Do NOT use any previous versions you may have! 3. Run the cncKadKeyUpdate.exe file you downloaded. The following will open:

4. Click the Collect information button. A new window will open, prompting you to save the a C2V file. 5. Type your Serial Number as the name of the file, click the My Documents button (marked below by the circle) and save it in your “My Documents” folder:

-2Upgrading Your HASP to v. 9.0

6. You may now get the error message below:

If so, restart your computer and then start again from section 3 . 7. You may also receive the following error message:

If you got this message, continue. If no such message, jump to section 10. 8. Run the FirmwareUpdate.exe file you downloaded (to My Documents). The following window will open; read the messages carefully and continue:

9. Click the Apply Update button and wait for a status message. This message may be for success (in which case you can continue), or failure: Success message: Failure message (example):

You can continue forward

You must contact the cncKad Support Desk – support@cncKad.net

-3Upgrading Your HASP to v. 9.0

10. Return to the cncKadKeyUpdate program (or re-open it) and do as before – click the Collect information button and Save the C2V file. 11. Close the cncKadKeyUpdate program and send your C2V file to license@cncKad.net .

After installing v. 9.0
When your dealer upgrades your workstation you will receive two files: o A V2C file, e.g. HaspUpdate_50-8871575332.V2C . o An HDF2 file, e.g. 8150_V9.hdf2 . Save these files to your My Documents folder. After you (or your dealer) have installed the new version you can use these files to upgrade your Plug : 1. Open the new Option 9.0 program (start => All Programs => Metalix => Tools => Options 9.0). 2. In the bottom-right corner there is a new section:

3. Click the button marked above by a to browse to the HDF2 file you saved in the My Documents folder, select it and click Open:

4. Browse to your V2C file by clicking the 5. Click the Update Key button.

button marked b and Open it.

Congratulations – you are now ready to use your new cncKad 9.0 .

-4Upgrading Your HASP to v. 9.0


相关文章:
CNCKAD自动套材使用说明书
CNCKAD(DFT 模式)下编辑单个零件在零件显示的窗口中选择零件后点击窗口中的在 CNCKAD 中编辑零件或选择零件后点击鼠标右键在菜单中选择【在 CNCKAD 中编辑零件】...
CNCKAD后置修改方法
CNCKAD后置修改方法_专业资料。CNCKAD后置 Metalix 自动编程软件后置修改方法一、如图在设置菜单下选取”机器设置”: 二、在机器设置对话框中,选取文件 VT-FAN.MDL ...
CNCKAD 数控编程软件安装流程说明书_图文
实例 1 七、实例 2 八、实例 3 LFK MACHINERY CO.,LTD -2- CNCKAD 数控编程软件安装流程 一、 安装步骤: 1. 将 CNCKAD 软件光盘,插入光驱,将自动运行光盘...
新的cncKad 版本 12_图文
新的cncKad 版本 12 1 新起草的特点 1.1 DFT 文本放置弧沿线 1.2 删除开放轮廓 1.3 改进弧和圆缩放 1.4 增强处理的用户数据标题和修改跟踪 2 新的导入/...
CNCKAD安装步骤
CNCKAD安装步骤_IT/计算机_专业资料。cncKad2008_v9.0 软件最佳安装详解发布: 2010-8-15 22:13 | 作者: bluesky5358 | 来源: 中国机械资讯网 cncKad2008_v9...
Cnckad自动编程软件
Cnckad自动编程软件_机械/仪表_工程科技_专业资料。Cnckad 自动编程软件在数控转塔冲床上的应用(青岛卓东机械科技有限公司,山东青岛 266400) 摘要: 介绍了 Cnckad ...
CNCkad模具库设置
CNCkad模具库设置_电脑基础知识_IT/计算机_专业资料。打开 CNC 编程软件,在模具选项里找到“转塔设置” 在出现的对话框上选择“添加/创建” 随便输入一个文件名称...
自动编程软件:CNCKAD、 Radan、NewCAM软件全方位比较(...
自动编程软件:CNCKAD、 Radan、NewCAM软件全方位比较(冲和割)_销售/营销_经管营销_专业资料。数控转塔冲床自动编程软件,数控激光切割机自动编程软件,CNCKAD、 Radan...
Cnckad自动编程软件在数控转塔冲床上的应用
Cnckad 自动编程软件在数控转塔冲床上 的应用 Category:数控转塔冲床信息 View:5 Author:数控冲床叶敬春,王雪 (青岛卓东机械科技有限公司,山东青岛 266400) 摘要...
特殊模具创建
我以 80*15 的百叶窗为例 第一步:先用 CNCKAD 把模具的外形画出来 第二步:用辅助线找到图形的中心 第三步:在工具栏中选择“设置参考点”的功能键,把参考...
更多相关标签:
cnckad教程 | cnckad下载 | cnckad10破解版 | cnckad破解版 | cnckad v12破解版 | cnckad v12 | cnckad2006 8.5 | cnckad 64位破解 |