当前位置:首页 >> 信息与通信 >>

ETSI EN 301 489-1 Test requirement


ETSI EN 301 489-1 Test requirement 1.EMC Emission:
Equipment test requirement Radio and Phenomenon Application ancillary equipment for fixed use(e.g. base station equipment) Radiated Emission (EN 55022) Conducted Emission (EN 55022) Conducted Emission (EN 55022) Harmonic current emission (EN 61000-3-2) Voltage fluctuations and flicker (EN 61000-3-3) Conducted Emission (EN 55022) Telecommunication port AC mains input port Enclosure of ancillary equipment DC Power input/output port Radio and ancillary equipment for vehicular use(e.g. mobile equipment) Radio and ancillary equipment for portable use(portable equipment) Reference clause In the present document

Applicable for Applicable for Applicable for stand alone stand alone stand alone testing testing testing Applicable Applicable Not applicable Not applicable Not applicable

8.2

8.3

AC mains input/output port

Applicable

Not Applicable Not applicable

8.4

AC mains input port

Applicable

8.5

Applicable

Not applicable

Not applicable

8.6

Applicable

Not applicable

Not applicable

8.7

2.Immunity:
Equipment test requirement Radio and Phenomenon Application ancillary equipment for fixed use(e.g. base station equipment) RF electro-magnetic field (80MHz to 2000MHz) (EN 61000-4-3) Electrostatic discharge (EN 61000-4-2) Enclosure Signal, Fast transients common mode (EN 61000-4-4) telecommunication and control ports, DC and AC power ports Signal, RF common mode 0.15MHz to 80MHz (EN 61000-4-6) telecommunication and control ports, DC and AC power ports Transients and surges ISO 7637-1(12V) ISO 7637-2(24V) Voltage dips and interruption (EN 61000-4-11) Surges, line to line and line to ground (EN 61000-4-5) DC power input port Enclosure Radio and Radio and ancillary equipment for vehicular use(e.g. mobile equipment) ancillary equipment for portable use(portable equipment) Reference clause In the present document

Applicable

Applicable

Applicable

9.2

Applicable

Applicable

Applicable

9.3

Applicable

Not applicable

Not applicable

9.4

Applicable

Applicable

Not applicable

9.5

Applicable

Applicable

Not applicable

9.6

AC mains power input port AC mains power input port, telecommunication port

Applicable

Not applicable

Not applicable

9.7

Applicable

Not applicable

Not applicable

9.8


相关文章:
AGILIS ALB 129 16W BUC EXT
The BUCs are also subjected to seal test to ...requirement @ frequency offset 1 kHz 10 kHz 100...(VSAT) ETSI EN 301 489-1 FCC Part 15 Class ...
requirement to test pipe system
requirement to test pipe system_英语学习_外语学习_教育专区。requirement to ...(3) the pipeline pressure test alternative forms and rules 1. To grade ...
需要辐射骚扰RE 和辐射抗扰度RS 测试的产品及标准列表
-1 EN 61800-3 Products HA appliances Test Item...ETSI EN 300 series ETSI EN 301 489 series ...
...Clothing - Test Methods and Requirements (iso 20...
requirement concerning the sleeves of a class 3 ...[1] ISO 3175-2, Textiles — Professional care,...Test methods and requirements [10] EN 13356, ...
EVT-DVT-PVT-MP流程
Test Manual MMI Check/ Field Trial/ User Tree ...(a) Customer or subcontractor requirement spec (b...(ETSI) & user requirements; 4 安全、环境和保险...
3GPP协议编号——标准协议之3GPP标准协议
test specifications SIM 和测试规范 Security ...On the closure of ETSI TC SMG, responsibility ... Stage S1 S1 Yes Yes Service Requirement for ...
4G RF标准协议_图文
UMTS? is a Trade Mark of ETSI registered for ...14 4 4.1 4.1.1 4.1.2 4.1.2.1 4.1.2.2 ...49 Test Requirement ......................
34229-1-c30
UMTS? is a Trade Mark of ETSI registered for ...26 Conformance requirement ....................1 7.9.2 7.9.3 7.9.4 7.9.5 Test ...
36141-b20
UMTS? is a Trade Mark of ETSI registered for ...69 6.3.2.5 Test Requirement ...............2-1 (2007): "Environmental testing - Part 2:...
3rd Generation Partnership Project, Technical Speci...
20 6.6.2.3.1 Minimu m requirement E-UTRA ...ETSI ETR 273-1-2: " Electro magnetic compatib...The Test Tolerances are used to relax the Mini...
更多相关标签: