当前位置:首页 >> 机械/仪表 >>

塑料管道相关欧洲标准


CEN TC 155- 发布的塑料管道相关欧洲标准
SAC/TC48/SC3 秘书处 标 准 号 2005 年 10 月 导则

标 准 名 称

EN ISO/TS Plastics piping systems for hot and cold water installations - 89/106/EEC 15874-7:

2003 Polypropylene (PP) - Part 7: Guidance for the assessment of conformity (ISO/TS 15874-7:2003) EN ISO/TS Plastics piping systems for hot and cold water installations - 89/106/EEC 15875-7:2003 Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2003) EN ISO/TS Plastics piping systems for hot and cold water installations - 89/106/EEC 15876-7:2003 Polybutylene (PB) - Part 7: Guidance for the assessment of conformity (ISO/TS 15876-7:2003) EN ISO/TS Plastics piping systems for hot and cold water installations - 89/106/EEC 15877-7:2003 Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2003) EN/TS 12200-2:2003 Plastics rainwater piping systems for above ground external use - 89/106/EEC Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity Plastics piping systems for water supply - Polyethylene (PE) - Part 7: 89/106/EEC Guidance for the assessment of conformity Plastics piping systems for buried and above-ground pressure systems 89/106/EEC for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 7: Guidance for the assessment of conformity Plastics piping systems for buried and above-ground drainage and 89/106/EEC sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity Plastics piping systems for water supply or drainage and sewerage - 89/106/EEC Glass-reinforced thermosetting plastics (GPR) based on unsaturated polyester resin (UP) - Recommended practice for installation Plastics piping systems - Glass-reinforced thermosetting plastics 89/106/EEC (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines Plastics piping systems for the supply of gaseous fuels - Polyethylene 89/106/EEC (PE) - Part 7: Guidance for the assessment of conformity Plastics piping systems for non-pressure underground drainage and 89/106/EEC sewerage - Polypropylene (PP) - Part 3: Guidance for installation

EN/TS 12201-7:2003 EN/TS 13244-7:2003

EN/TS 1456-2:2003

EN/TS 14578:2003

EN/TS 14807:2004

EN/TS 1555-7:2003 EN/TS 1852-3:2003

EN/TS Plastics piping systems for non-pressure underground drainage and 89/106/EEC 1852-3:2003/A1:2005 sewerage - Polypropylene (PP) - Part 3: Guidance for installation EN 1053:1995 EN 1054:1995 EN 1055:1996 Plastics piping systems - Thermoplastics piping systems for 89/106/EEC, non-pressure applications - Test method for watertightness 93/38/EEC Plastics piping systems - Thermoplastics piping systems for soil and 89/106/EEC, waste discharge - Test method for airtightness of joints 93/38/EEC Plastics piping systems - Thermoplastics piping systems for soil and 89/106/EEC,
1

waste discharge inside buildings - Test method for resistance to 93/38/EEC elevated temperature cycling EN 1115-1:1997 Plastics piping systems for underground drainage and sewerage under 89/106/EEC pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 1: General Plastics piping systems for underground drainage and sewerage under 89/106/EEC pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 3: Fittings Plastics piping systems for underground drainage and sewerage under 89/106/EEC pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 5: Fitness for purpose of the joints Plastics piping systems - Joints for glass-reinforced thermosetting 89/106/EEC, plastics (GRP) pipes and fittings - Test methods for leaktightness and 93/38/EEC resistance to damage of flexible and reduced-articulation joints Plastics piping systems - Glass-reinforced thermosetting plastics 93/38/EEC (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition Plastics piping systems - Thermoplastics fittings - Test method for 89/106/EEC impact resistance Plastics piping systems - Brackets for rainwater piping systems - Test 89/106/EEC method for bracket strength Plastics piping systems - Polyethylene piping materials and 89/106/EEC components - Determination of volatile content Plastics piping systems - Polyethylene (PE) valves - Test method for 89/106/EEC resistance to bending between supports Plastics piping systems - Polyethylene (PE) pipes - Test method for 89/106/EEC the resistance to internal pressure after application of squeeze-off Plastics piping systems - Injection-moulded thermoplastics fittings, 89/106/EEC valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components Plastics piping systems - Fittings, valves and ancillaries - 89/106/EEC Determination of gaseous flow rate/pressure drop relationships Plastics piping systems - Determination of moisture content in 89/106/EEC thermoplastics by coulometry Plastics piping systems - Polyethylene (PE) valves - Test method for 89/106/EEC resistance to thermal cycling Plastics rainwater piping systems for above ground external use - 89/106/EEC Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system Plastics piping systems for water supply - Polyethylene (PE) - Part 1: 89/106/EEC General Plastics piping systems for water supply - Polyethylene (PE) - Part 2: 89/106/EEC Pipes
2

EN 1115-3:1996

EN 1115-5:1996

EN 1119:1996

EN 1120:1996

EN 12061:1999 EN 12095:1997 EN 12099:1997 EN 12100:1997 EN 12106:1997 EN 12107:1997

EN 12117:1997 EN 12118:1997 EN 12119:1997 EN 12200-1:2000

EN 12201-1:2003 EN 12201-2:2003

EN 12201-3:2003 EN 12201-4:2001 EN 12201-5:2003 EN 1225:1996

Plastics piping systems for water supply - Polyethylene (PE) - Part 3: 89/106/EEC Fittings Plastics piping systems for water supply - Polyethylene (PE) - Part 4: 89/106/EEC Valves Plastics piping systems for water supply - Polyethylene (PE) - Part 5: 89/106/EEC Fitness for purpose of the system Plastics piping systems - Glass-reinforced thermosetting plastics 93/38/EEC (GRP) pipes - Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness Plastics piping systems - Thermoplastics fittings - Test method for 89/106/EEC mechanical strength or flexibility of fabricated fittings Plastics piping systems - Glass-reinforced thermosetting plastics 93/38/EEC (GRP) pipes - Test method to prove the resistance to initial ring deflection Plastics piping systems - Glass-reinforced thermosetting plastics 93/38/EEC (GRP) pipes - Determination of the long-term ultimate relative ring deflection under wet conditions Plastics piping systems - Glass-reinforced thermosetting plastics 93/38/EEC (GRP) pipes - Determination of initial specific ring stiffness Plastics piping systems - Glass-reinforced thermosetting plastics 89/106/EEC (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure Plastics piping systems - Thermoplastics pipes and fittings for hot and 89/106/EEC cold water - Test method for the resistance of mounted assemblies to temperature cycling Plastics piping systems - Systems for hot and cold water - Test 89/106/EEC method for leaktightness under vacuum Plastics piping systems - Thermoplastics pipes and associated fittings 89/106/EEC for hot and cold water - Test method for resistance of joints to pressure cycling Plastics piping systems - Thermoplastics piping systems for buried 89/106/EEC, non-pressure applications - Test methods for leaktightness of 93/38/EEC elastomeric sealing ring type joints Plastics piping systems for buried and above-ground pressure systems 89/106/EEC for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General Plastics piping systems for buried and above-ground pressure systems 89/106/EEC for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2: Pipes Plastics piping systems for buried and above-ground pressure systems 89/106/EEC for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3: Fittings Plastics piping systems for buried and above-ground pressure systems 89/106/EEC for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves
3

EN 12256:1998 EN 1226:1996

EN 1227:1997

EN 1228:1996 EN 1229:1996

EN 12293:1999

EN 12294:1999 EN 12295:1999

EN 1277:2003

EN 13244-1:2002

EN 13244-2:2002

EN 13244-3:2002

EN 13244-4:2002

EN 13244-5:2002

Plastics piping systems for buried and above-ground pressure systems 89/106/EEC for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 5: Fitness for purpose of the system Plastics piping systems for soil and waste discharge (low and high 89/106/EEC, temperature) within the building structure - Unplasticized poly(vinyl 93/38/EEC chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system Plastics piping systems for renovation of underground non-pressure 89/106/EEC drainage and sewerage networks - Part 1: General Plastics piping systems for renovation of underground non-pressure 89/106/EEC drainage and sewerage networks - Part 3: Lining with close-fit pipes Plastics piping systems for renovation of underground non-pressure 89/106/EEC drainage and sewerage networks - Part 4: Lining with cured-in-place pipes Plastics piping systems for non-pressure underground drainage and 89/106/EEC sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers Guidance on the classification and design of plastics piping systems 89/106/EEC used for renovation Plastics piping systems - Glass-reinforced thermosetting plastics 93/38/EEC (GRP) pipes - Determination of initial longitudinal tensile properties Plastics piping systems - Glass-reinforced thermosetting plastics 93/38/EEC (GRP) pipes - Determination of initial longitudinal tensile properties Plastics piping systems - Glass-reinforced thermosetting plastics 93/38/EEC (GRP) pipes - Determination of the apparent initial circumferential tensile strength Plastics piping systems - Glass-reinforced thermosetting plastics 93/38/EEC (GRP) pipes - Determination of the apparent initial circumferential tensile strength Plastics piping systems for non-pressure underground drainage and 89/106/EEC, sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: 93/38/EEC Specifications for pipes, fittings and the system Plastics piping and ducting systems - Thermoplastics pipes - 89/106/EEC, Determination of resistance to external blows by the staircase method 93/38/EEC Plastics piping systems - Piping systems for underground drainage 93/38/EEC and sewerage - Test method for resistance to combined temperature cycling and external loading Plastics piping systems for renovation of underground gas supply networks - Part 1: General Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes Plastics piping systems for renovation of underground water supply networks - Part 1: General Plastics piping systems for renovation of underground water supply 4

EN 1329-1:1999

EN 13566-1:2002 EN 13566-3:2002 EN 13566-4:2002

EN 13598-1:2003

EN 13689:2002 EN 1393:1996 EN 1393:1996/AC:1997 EN 1394:1996

EN 1394:1996/AC:1997 EN 1401-1:1998

EN 1411:1996 EN 1437:2002

EN 14408-1:2004 EN 14408-3:2004 EN 14409-1:2004 EN 14409-3:2004

networks - Part 3: Lining with close fit-pipes EN 1446:1996 EN 1447:1996 Plastics piping and ducting systems - Thermoplastics pipes - 93/38/EEC Determination of ring flexibility Plastics piping systems - Glass-reinforced thermosetting plastics 89/106/EEC, (GRP) pipes - Determination of long-term resistance to internal 93/38/EEC pressure Plastics piping systems - Glass-reinforced thermosetting plastics 93/38/EEC (GRP) components - Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals Plastics piping systems - Glass-reinforced thermosetting plastics 93/38/EEC (GRP) components - Test methods to prove the design of cemented socket-and-spigot joints Plastics piping systems - Glass-reinforced thermosetting plastics 93/38/EEC (GRP) components - Test methods to prove the design of bolted flange joints Plastics piping systems - Glass-reinforced thermosetting plastics 89/106/EEC, (GRP) components - Test methods to prove the design of bolted 93/38/EEC flange joints Plastics piping systems for soil and waste discharge (low and high 89/106/EEC temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system Plastics piping systems for water supply - Unplasticized poly(vinyl 89/106/EEC, chloride) (PVC-U) - Part 1: General 93/38/EEC Plastics piping systems for water supply - Unplasticized poly(vinyl 89/106/EEC, chloride) (PVC-U) - Part 2: Pipes 93/38/EEC Plastics piping systems for water supply - Unplasticized poly(vinyl 89/106/EEC, chloride) (PVC-U) - Part 3: Fittings 93/38/EEC Plastics piping systems for water supply - Unplasticized poly(vinyl 89/106/EEC, chloride) (PVC-U) - Part 4: Valves and ancillary equipment 93/38/EEC Plastics piping systems for water supply - Unplasticized poly(vinyl 93/38/EEC chloride) (PVC-U) - Part 5: Fitness for purpose of the system Plastics piping systems with structured wall-pipes for soil and waste 89/106/EEC, discharge (low and high temperature) inside buildings - Unplasticized 93/38/EEC poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system Plastics piping systems for soil and waste discharge (low and high 89/106/EEC temperature) within the building structure Acrylonitrile-butadiene-styrene (ABS) - Part 1: Requirements for pipes, fittings and the system Plastics piping systems for buried and above-ground drainage and 89/106/EEC, sewerage under pressure - Unplasticized poly(vinyl chloride) 93/38/EEC (PVC-U) - Part 1: Specifications for piping components and the system Plastics piping systems for soil and waste discharge (low and high 89/106/EEC temperature) within the building structure - Polyethylene (PE) - Part
5

EN 1448:1996

EN 1449:1996

EN 1450:1996

EN 1450:1996/A1:1998 EN 1451-1:1998

EN 1452-1:1999 EN 1452-2:1999 EN 1452-3:1999 EN 1452-4:1999 EN 1452-5:1999 EN 1453-1:2000

EN 1455-1:1999

EN 1456-1:2001

EN 1519-1:1999

1: Specifications for pipes, fittings and the system EN 1555-1:2002 EN 1555-2:2002 EN 1555-3:2002 Plastics piping systems for the supply of gaseous fuels - Polyethylene 89/106/EEC (PE) - Part 1: General Plastics piping systems for the supply of gaseous fuels - Polyethylene 89/106/EEC (PE) - Part 2: Pipes Plastics piping systems for the supply of gaseous fuels - Polyethylene 89/106/EEC (PE) - Part 3: Fittings

EN Plastics piping systems for the supply of gaseous fuels - Polyethylene 89/106/EEC 1555-3:2002/A1:2005 (PE) - Part 3: Fittings EN 1555-4:2002 EN 1555-5:2002 EN 1565-1:1998 Plastics piping systems for the supply of gaseous fuels - Polyethylene 89/106/EEC (PE) - Part 4: Valves Plastics piping systems for the supply of gaseous fuels - Polyethylene 89/106/EEC (PE) - Part 5: Fitness for purpose of the system Plastics piping systems for soil and waste discharge (low and high 89/106/EEC temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 1: Specifications for pipes, fittings and the system Plastics piping systems for soil and waste discharge (low and high 89/106/EEC temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system Plastics piping systems for non-pressure drainage and sewerage - 89/106/EEC Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 3: Fittings Plastics piping systems for non-pressure drainage and sewerage - 89/106/EEC Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 5: Fitness for purpose of the joints Plastics piping systems - Glass-reinforced thermosetting plastics 89/106/EEC (GRP) pipes - Test method for the effects of cyclic internal pressure Plastics piping systems - Valves for polyethylene (PE) piping systems 89/106/EEC - Test method for leaktightness under and after bending applied to the operating mechanisms Plastics piping systems - Thermoplastics valves - Test method for the 89/106/EEC integrity of a valve after temperature cycling under bending Plastics piping systems - Thermoplastics valves - Test method for the 89/106/EEC integrity of a valve after an external blow Plastics piping systems - Polyethylene (PE) tapping tees - Test method 89/106/EEC for impact resistance of an assembled tapping tee Plastics piping systems for non-pressure underground drainage and 89/106/EEC sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system

EN 1566-1:1998

EN 1636-3:1997

EN 1636-5:1997

EN 1638:1997 EN 1680:1997

EN 1704:1997 EN 1705:1996 EN 1716:1997 EN 1852-1:1997

EN Plastics piping systems for non-pressure underground drainage and 89/106/EEC 1852-1:1997/A1:2002 sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system EN 1862:1997 Plastics piping systems - Glass-reinforced thermosetting plastics 89/106/EEC (GRP) pipes - Determination of the relative flexural creep factor
6

following exposure to a chemical environment EN 1905:1998 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) 89/106/EEC pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content Plastics piping and ducting systems - Thermoplastics spirally-formed 89/106/EEC structured-wall pipes - Determination of the tensile strength of a seam Thermoplastics piping systems - Joints for buried non-pressure 89/106/EEC sewerage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure Plastics piping systems - Crosslinked polyethylene (PE-X) pipes - 93/38/EEC Determination of degree of crosslinking by solvent extraction Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) 93/38/EEC pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT) Plastics piping systems - Glass-reinforced plastics components - 93/38/EEC Determination of the amounts of constituents using the gravimetric method

EN 1979:1999 EN 1989:2000

EN 579:1993 EN 580:2003

EN 637:1994

EN 637:1994/AC:1995 Plastics piping systems - Glass-reinforced plastics components - 93/38/EEC Determination of the amounts of constituents using the gravimetric method EN 705:1994 Plastics piping systems - Glass-reinforced thermosetting plastics 93/38/EEC (GRP) pipes and fittings - Methods for regression analysis and their use

EN 705:1994/AC:1995 Plastics piping systems - Glass-reinforced thermosetting plastics 93/38/EEC (GRP) pipes and fittings - Methods for regression analysis and their use EN 712:1993 Thermoplastics piping systems - End-load bearing mechanical joints 93/38/EEC between pressure pipes and fittings - Test method for resistance to pull-out under constant longitudinal force Plastics piping systems - Mechanical joints between fittings and 89/106/EEC, polyolefin pressure pipes - Test method for leaktightness under 93/38/EEC internal pressure of assemblies subjected to bending Thermoplastics piping systems - Non-end-load-bearing elastomeric 89/106/EEC, sealing ring type joints beteween pressure pipes and moulded fittings 93/38/EEC - Test method for leaktighness under internal hydrostatic pressure without end thrust Thermoplastics piping systems - End-load bearing joints between 89/106/EEC, small diameter pressure pipes and fittings - Test method for 93/38/EEC leaktightness under internal water pressure, including end thrust Plastics piping and ducting systems - Thermoplastics pipes and 93/38/EEC fittings - Determination of Vicat softening temperature (VST) Plastics piping and ducting systems - Polyolefin pipes and fittings - 93/38/EEC Determination of oxidation induction time Plastics piping and ducting systems - Thermoplastics pipes - Test 89/106/EEC,
7

EN 713:1993

EN 714:1994

EN 715:1994

EN 727:1994 EN 728:1997 EN 744:1995

method for resistance to external blows by the round-the-clock 93/38/EEC method EN 761:1994 Plastics piping systems - Glass-reinforced thermosetting plastics 93/38/EEC (GRP) pipes - Determination of the creep factor under dry conditions

EN 761:1994/AC:1995 Plastics piping systems - Glass-reinforced thermosetting plastics 93/38/EEC (GRP) pipes - Determination of the creep factor under dry conditions EN 802:1994 Plastics piping and ducting systems - Injection-moulded 93/38/EEC thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing Plastics piping systems - Injection-moulded thermoplastics fittings for 89/106/EEC, elastic sealing ring type joints for pressure piping - Test method for 93/38/EEC resistance to a short-term internal pressure without end thrust Plastics piping systems - Injection-moulded socket fittings for 89/106/EEC, solvent-cemented joints for pressure piping - Test method for 93/38/EEC resistance to a short-term internal hydrostatic pressure Plastics piping systems - Elastomeric sealing ring type joints and 89/106/EEC, mechanical joints for thermoplastics pressure piping - Test method for 93/38/EEC leaktightness under external hydrostatic pressure Plastics piping systems - Thermoplastics valves - Test methods for 89/106/EEC, resistance to internal pressure and leaktightness 93/38/EEC Plastics piping systems - Thermoplastics pipes - Determination of 89/106/EEC, resistance to internal pressure at constant temperature 93/38/EEC

EN 803:1994

EN 804:1994

EN 911:1995

EN 917:1997 EN 921:1994

EN 921:1994/AC:1995 Plastics piping systems - Thermoplastics pipes - Determination of 89/106/EEC resistance to internal pressure at constant temperature EN 922:1994 Plastics piping and ducting systems - Pipes and fittings of 93/38/EEC unplasticized poly(vinyl chloride) (PVC-U) - Specimen preparation for determination of the viscosity number and calculation of the K-value Thermoplastics materials for pipes and fittings for pressure 89/106/EEC applications - Classification and designation - Overall service (design) coefficient (ISO 12162:1995) Thermoplastics pipes for the conveyance of fluids - Determination of 89/106/EEC resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:1997) Polyolefin pipes for the conveyance of fluids - Determination of 89/106/EEC resistance to crack propagation - Test method for slow crack growth on notched pipes (notch test) (ISO 13479:1997) Plastics pipes for the conveyance of fluids under pressure - Miner's 89/106/EEC rule - Calculation method for cumulative damage (ISO 13760:1998) Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) 89/106/EEC end-load-bearing double socket joints - Test method for leaktightness and strength while subjected to bending and internal pressure (ISO 13783:1997) Plastics piping systems - Elastomeric-sealing-ring-type socket joints 89/106/EEC of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U
8

EN ISO 12162:1995

EN ISO 13478:1997

EN ISO 13479:1997

EN ISO 13760:1998 EN ISO 13783:1997

EN ISO 13844:2000

pipes - Test method for leaktightness under negative pressure (ISO 13844:2000) EN ISO 13845:2000 Plastics piping systems - Elastomeric-sealing-ring-type socket for use 89/106/EEC with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2000) Plastics piping systems - End-load-bearing and non-end-load-bearing 89/106/EEC assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure (ISO 13846:2000) Plastics piping systems for industrial applications - 97/23/EC Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) Specifications for components and the system - Metric series (ISO 15493:2003) Plastics piping systems for industrial applications - Polybutene (PB), 97/23/EC polyethylene (PE) and polypropylene (PP) - Specifications for components and the system - Metric series (ISO 15494:2003)

EN ISO 13846:2000

EN ISO 15493:2003

EN ISO 15494:2003

EN ISO 15874-1:2003 Plastics piping systems for hot and cold water installations - 89/106/EEC Polypropylene (PP) - Part 1: General (ISO 15874-1:2003) EN ISO 15874-2:2003 Plastics piping systems for hot and cold water installations - 89/106/EEC Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2003) EN ISO 15874-3:2003 Plastics piping systems for hot and cold water installations - 89/106/EEC Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2003) EN ISO 15874-5:2003 Plastics piping systems for hot and cold water installations - 89/106/EEC Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO 15874-5:2003) EN ISO 15875:2003 Plastics piping systems for hot and cold water installations - 89/106/EEC Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO 15875-2:2003)

EN ISO 15875-1:2003 Plastics piping systems for hot and cold water installations - 89/106/EEC Crosslinked polyethylene (PE-X) - Part 1: General (ISO 15875-1:2003) EN ISO 15875-3:2003 Plastics piping systems for hot and cold water installations - 89/106/EEC Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003) EN ISO 15875-5:2003 Plastics piping systems for hot and cold water installations - 89/106/EEC Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003) EN ISO 15876-1:2003 Plastics piping systems for hot and cold water installations - 89/106/EEC Polybutylene (PB) - Part 1: General (ISO 15876-1:2003) EN ISO 15876-2:2003 Plastics piping systems for hot and cold water installations - 89/106/EEC Polybutylene (PB) - Part 2: Pipes (ISO 15876-2:2003) EN ISO 15876-3:2003 Plastics piping systems for hot and cold water installations - 89/106/EEC Polybutylene (PB) - Part 3: Fittings (ISO 15876-3:2003) EN ISO 15876-5:2003 Plastics piping systems for hot and cold water installations - 89/106/EEC
9

Polybutylene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2003) EN ISO 15877-1:2003 Plastics piping systems for hot and cold water installations - 89/106/EEC Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2003) EN ISO 15877-2:2003 Plastics piping systems for hot and cold water installations - 89/106/EEC Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes (ISO 15877-2:2003) EN ISO 15877-3:2003 Plastics piping systems for hot and cold water installations - 89/106/EEC Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings (ISO 15877-3:2003) EN ISO 15877-5:2003 Plastics piping systems for hot and cold water installations - 89/106/EEC Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO 15877-5:2003) EN ISO 16871:2003 EN ISO 2505:2005 EN ISO 3126:2005 EN ISO 580:2005 Plastics piping and ducting systems - Plastics pipes and fittings - 89/106/EEC Method for exposure to direct (natural) weathering (ISO 16871:2003) Thermoplastics pipes - Longitudinal reversion - Test method and 93/38/EEC parameters (ISO 2505:2005) Plastics piping systems - Plastics components - Determination of 93/38/EEC dimensions (ISO 3126:2005) Plastics piping and ducting systems - Injection-moulded 93/38/EEC thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005) Thermoplastics pipes - Determination of tensile properties - Part 1: 89/106/EEC, General test method (ISO 6259-1:1997) 93/38/EEC Plastics pipes and fittings - Determination of opacity (ISO 7686:2005) 93/38/EEC Plastics piping systems for the transport of water intended for human 89/106/EEC consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints (ISO 8795:2001) Plastics piping and ducting systems - Determination of the long-term 89/106/EEC, hydrostatic strength of thermoplastics materials in pipe form by 93/38/EEC extrapolation (ISO 9080:2003) Plastics pipes - Determination of creep ratio (ISO 9967:1994) 93/38/EEC Thermoplastics pipes - Determination of ring stiffness (ISO 89/106/EEC, 9969:1994) 93/38/EEC Plastics piping and ducting systems - Systems outside building 89/106/EEC structures for the conveyance of water or sewage - Practices for installation above and below ground Plastics piping systems - Guidance for the installation inside buildings 89/106/EEC of pressure piping systems for hot and cold water intended for human consumption Plastics piping systems for soil and waste discharge (low and high 89/106/EEC temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
10

EN ISO 6259-1:2001 EN ISO 7686:2005 EN ISO 8795:2001

EN ISO 9080:2003

EN ISO 9967:1995 EN ISO 9969:1995 ENV 1046:2001

ENV 12108:2001

ENV 1329-2:2001

ENV 13801:2000

Plastics piping systems for soil and waste discharge (low and high 89/106/EEC temperature) within the building structure - Thermoplastics Recommended practice for installation Plastics piping systems for non-pressure underground drainage and 89/106/EEC sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity Plastics piping systems for non-pressure underground drainage and 89/106/EEC, sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: 93/38/EEC Guidance for installation Plastics piping systems for soil and waste discharge (low and high 89/106/EEC temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity Plastics piping systems for water supply - Unplasticized poly(vinyl 93/38/EEC chloride) (PVC-U) - Part 6: Guidance for installation Plastics piping systems for water supply - Unplasticized poly(vinyl 89/106/EEC chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity Plastics piping systems with structured wall pipes for soil and waste 89/106/EEC discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity Plastics piping systems for soil and waste discharge (low and high 89/106/EEC temperature) within the building structure Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity Plastics piping systems for soil and waste discharge (low and high 89/106/EEC temperature) within the building stucture - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity Plastics piping systems for soil and waste discharge (low and high 89/106/EEC temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 2: Guidance for the assessment of conformity Plastics piping systems for soil and waste discharge (low and high 89/106/EEC temperature) within the building structure - Chlorinated poly (vinyl chloride) (PVC-C) - Part 2: Guidance for the assessment of conformity Plastics piping systems for non-pressure underground drainage and 89/106/EEC sewerage - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity Plastics piping systems for the transport of water intended for human 89/106/EEC consumption - Migration assessment - Guidance on the interpretation of laboratory derived migration values

ENV 1401-2:2000

ENV 1401-3:2001

ENV 1451-2:2001

ENV 1452-6:2001 ENV 1452-7:2000

ENV 1453-2:2000

ENV 1455-2:2001

ENV 1519-2:2001

ENV 1565-2:2001

ENV 1566-2:2001

ENV 1852-2:2000

ENV 852:2001

11


相关文章:
欧盟标准大全
用光电晶体管输出与环境相关的光电耦合器 EN 120005-1996 空白详细规范:光电...认定的标准产品结构规范用空白 详细规范 EN 12201-1-2003 供水用塑料管道系统....
世界部分管道标准编号
62 欧洲管道标准(EN pipe standards) ......聚乙烯塑料管件规范 非承压管道(X-15-358)用硬质聚氯乙 烯(PVC)和相关塑料化合物规范 (08.04) 水、废水和排气...
欧洲铸铁管标准
(PVC-C) 第 1 部分:管材、 管件和系统 无压力排水和污 水用塑料管道系 统...1/2 相关文档推荐 EN388 欧洲能效标准 22页 免费 欧洲环保标准 9页 免费 ...
塑料管道标准汇编__目录
第一部分 基础标准 1、 GB/T 1047-2005 管道元件 DN(公称尺寸)的定义和选用...1/2 相关文档推荐 塑料管道标准汇编__目录 3页 1下载券 塑料管道标准目录 3...
阀门 欧洲标准 EN1555-4-2002 译文
燃气输送用塑料管道系统 聚乙烯(PE)- 第 4 部分: 阀门 本欧洲标准于2002年...注:用其它材料制造并符合相关标准的阀门设计用于燃气输送,如果具有符合 EN 1555 ...
各国标准简称
国际电工委员会 国际电工委员会标准 IEC 国际 国际电信联盟标准 ITU 欧共体 欧洲...ISO 的宗旨是“在世界上促进标准化及其相关活动的发展,以 便于商品和服务的国际...
欧洲螺栓标准(EN bolt standards)
塑料管道系统 玻璃 thermosetting plastics 增强热固塑料 (GRP) (GRP) components...日本螺栓标准(JIS bolt ... 欧洲软管标准(EN hose s...1/2 相关文档推荐 ...
欧盟医疗器械标准的介绍
指令规定了基本要求, 详细的技术规范和定量指标则由相关协调标准规定。 协调标准是 欧洲标准组织欧洲标准化委员会( European Committee for Standardization, CEN) 、...
欧洲市场阀门质量认证的法规和标准
1/2 相关文档推荐 欧洲金融市场法规结构 暂无评价 ...欧洲市场阀门质量认证的法规和标准 内容来源自网络 ...由于管道系统选择最适合的阀门显得非常重要,所以,了解...
欧盟ROHS标准
1/2 相关文档推荐 欧盟标准RoHS 2页 免费 欧盟RoHS标准条款 7页 1下载券 ...—含溴化火阻剂的塑料, —石棉废弃物和含石棉的组件 —阴极放射管 —含氯氟烃...
更多相关标签:
塑料管道标准 | 塑料管道标准汇编 | igf氟塑料管道泵价格 | 汕头igf氟塑料管道泵 | 梅州igf氟塑料管道泵 | 惠州igf氟塑料管道泵 | 揭阳igf氟塑料管道泵 | 广州igf氟塑料管道泵 |