当前位置:首页 >> 机械/仪表 >>

Cameron 球阀样本


PROCESS VALVES

TK? HI-Integrity Trunnion Mounted Ball Valves

TK

?

PROCESS VALVES

TABLE OF CONTENTS

TK HI-INTEGRITY TRUNNION

MOUNTED BALL VALVES
Features Design Other Products Accessories and Locking Devices Quality Assurance, Specifications and Compliance 1 2 3 4 5

DIMENSIONAL DATA
Class 150 Class 300 Class 600 Class 900 Class 1500 Class 2500 and General Notes 6 7 8 9 10 11

GEAR TOPWORKS DATA
Class 150-300 Class 600 Class 900 Class 1500 Class 2500 API 2000, 3000 & 5000 API 2000, 3000 & 5000 Topworks Data Valve Bores Special Flange Bolting Flow Coefficients (CV) 12 13 14 15 16 17 18 18 19 19 20

TRADEMARK INFORMATION

TK

? CT-TK-HI/TMBV

05/07 NP-2M

PROCESS VALVES

HI-INTEGRITY TRUNNION MOUNTED BALL VALVES
Since 1963, TK trunnion-mounted ball valves have provided over 40 years of reliable block and bleed service for the oil and gas industry. Known for its robust design, superior sealing areas and stainless steel overlays, TK is widely recognized as the leader in providing valve solutions for the oil and gas industries’ most severe service applications. These design features allow TK to provide valves with unmatched durability, safety and long-term performance. Cameron valve personnel are skilled professionals who take pride in their work and are committed to the highest standards of excellence. The TK valve is aligned with other fine products of Cameron that lead their field in pipelining, oil and gas production, offshore, onshore, sub-sea, refining and industrial processing.

With its full spectrum of quality designs and field service that spans the globe, Cameron is the World Leader in single source partnering for valve products.

WELD OVERLAY TECHNOLOGY
TK is the recognized leader in weld overlay technology for severe service applications. Depending on the application TK can choose from a variety of stainless steel and high nickel alloys to apply to the valve’s critical areas. These overlays improve both valve performance and increase the lifetime of the valve.

PRODUCT RANGE AND OPTIONS
API 6D Valves 2 in. - 36 in. 2 in. - 24 in. 2 in. - 16 in. 2 1/16 in. - 11 in. 3/4 in. - 1 1/2 in. Class 150 - 600 Class 900 - 1500 Class 2500 Class 2000 - 5000 Class 900 - 2500

API 6A Valves Instrumentation Valves Temperature

-50°F to 500°F Standard Material -150°F or 550°F Available Upon Request

Materials Carbon Steel, Stainless Steel, Duplex SS, Inconel, Monel, Low Temperature, Hastelloy and other special materials are used as service conditions require. Seats Soft seated insert material selections include Reinforced Teflon, Nylon, PEEK and other special insert materials are available upon request. Metal seated material selections include Tungsten Carbide, Chrome Carbide and Stellite 6. Trim Materials 1 or 3 mil ENP, Stainless Steel, Low Temperature, Duplex, Inconel, Monel and Hastelloy.

TK

? CT-TK-HI/TMBV

05/07 NP-2M

1

PROCESS VALVES

HI-INTEGRITY TRUNNION MOUNTED BALL VALVES
DESIGN
In Cameron’s Hammond facility, production process teams are organized into manufacturing cells, each with responsibility for quality and on time delivery. Using Six Sigma lean methodology the result is a finished product of unmatched excellence, built with precision and pride.

PISTON-ACTION SEATS
As line pressure increases, the seat reacts to the force of the pressure to form an effective seal. Line pressure against seat area A1 (see illustration) is not equalized by pressure against seat area A2. The difference in areas “D” times the line pressure creates a “piston-action” which forces the seat unit against the ball surface. The net result of this “piston-action” is the formation of a tight, effective seal. In the absence of line pressure, coil springs around the seat unit provide a tight seal by keeping the seat in contact with the ball surface.
D

A2 The TK “OF” valve is an end entry, trunnion mounted ball valve
Secondary Stem Sealant Injection

Fire Safe Packing

Bleed Valve

Secondary Seat Injection Sealant

Robust Design with Heavy Wall Thickness Drain Plug Large Bearing Surface

DOUBLE BLOCK & BLEED DESIGN

2

TK

? CT-TK-HI/TMBV

05/07 NP-2M

}

}A

1

Double Barrier Stem Seal

Self Relieving Seat Design

Wide Seat Area

PROCESS VALVES

HI-INTEGRITY TRUNNION MOUNTED BALL VALVES
MARKET SERVED
TK valves are ideally suited for:
? Oil and Gas Pipeline (including high H2S /CO 2 ) ? ? ? ? ? ? ? ? ? Produced Water (Brine) Services Suction and Discharge Isolation Emergency Shutdown Decoking Isolation Block and Bypass Sub Sea Services Buried Services Meter Isolation Well Head

OTHER PRODUCTS
Twin Valve
Introduced nearly a decade ago, TK’s Twin Valve is the ideal valve for double isolation applications. TK’s Twin Valve satisfies the double isolation requirements as specified in most Process Safety Management Systems. By combining two valves into one, the Twin Valve reduces weight, envelope dimensions and potential leak paths.

Metal Seated
TK also offers a metal seated design which is ideally suited for the following applications: ? ? ? ? High Temperature/Abrasive Services Severe Corrosive Mediums Coal Gasification Throttling and Control Services

The TK metal seated design has a temperature range of -50°F to 550°F and can meet acceptance criteria equal to soft seated design (zero visible leakage). Critical to metal seated valve performance is the sealing surface. TK uses a proprietary grade tungsten carbide coating which is applied to both the ball and seats using computer controlled equipment ensuring an even application and hardness.

Instrumentation Valves
TK also manufactures 3/4, 1 and 1 1/2 inch instrumentation valves in Class 900 - 2500. All instrumentation valves are full bore. These valves can be manufactured with any of the following end configurations; Raised Face, RTJ, Butt Weld, Socket Weld and Male or Female Screwed End. The full range can be operated with lever (standard), gear or actuator. TK can fit stem extensions on the complete range to suit a customer’s specific requirements.

TK

? CT-TK-HI/TMBV

05/07 NP-2M

3

PROCESS VALVES

HI-INTEGRITY TRUNNION MOUNTED BALL VALVES

ACCESSORIES Underground Extensions
TK ball valves are well suited for underground installations or remote services. Valves fitted with stem extensions can have extended vent drain. As an option, vent and drain lines can have two isolation valves - one next to the main valve and one at the top of the extension line, ending below the valve operator.

Locking Devices
Standard key operated locks and special safety interlock systems can be fitted on all TK valves. Lever operated valves lock between bonnet and valve stop plate for maximum security and ease of installation. Gear operated valves lock between input shaft and gear box operation.

Grit Excluder Seat Design
In some abrasive applications there is a possibility that small, solid particles could get trapped behind the seat holders. This could cause the valve to become difficult to operate or cause premature wear of the seat o-rings or seals. The Grit Excluder seat design minimizes this problem by restricting the pathway of these particles from entering the area behind the seat holders. This seat design can be used on both soft and metal seated valves.

4

TK

? CT-TK-HI/TMBV

05/07 NP-2M

PROCESS VALVES

HI-INTEGRITY TRUNNION MOUNTED BALL VALVES

QUALITY ASSURANCE
Cameron management operates a high level quality control program to insure that all TK products are designed and manufactured to the highest standards available using the latest technology. The Cameron quality assurance program encompasses our entire operation, from order entry to final inspection and delivery.

SPECIFICATIONS AND COMPLIANCE
ISO 9001-2000 API Q1 API 6D API 6A PED (Pressure Equipment Directive 97/23/EC) FIRE TESTED TO: API 6FA NACE MR0175 (2002) Compliant

Cameron’s Six Sigma lean manufacturing philosophy and the standard 12/18 month warranty assure that the design, materials and workmanship of all TK products result in years of dependable operation. Every TK valve is individually pressure tested to meet or exceed industry standards. Certification for hydrostatic test results and material test reports are available upon request.

TK

? CT-TK-HI/TMBV

05/07 NP-2M

5

PROCESS VALVES

HI-INTEGRITY TRUNNION MOUNTED BALL VALVES CLASS 150 H
F
C LEVERED L (LEVER)

F

I

G D

D

C B A B A

E

TWO PIECE DIMENSIONS SIZE in.
* 2 x 1 1/2 * * * 2x2 3x2 3x3 4x3 4x4 6x4

RF
7 7 8 8 9 9 10.50

A

RTJ
7.50 7.50 8.50 8.50 9.50 9.50 11.0

RF
3.50 3.81 4 4.75 3.69 5.19 5.25

B

RTJ
3.75 4.06 5.25 5.0 3.94 5.44 5.50

C
3 3 3.75 5.25 5.25 6.25 6.25

D
7 7.63 7.94 9.12 9.12 10.06 10.06

D (Lever)
4.75 5.88 6.19 6.94 6.94 8.13 8.13

E
6 6 7.50 7.50 9 9 11

F
2.63 2.63 2.63 2.63 2.63 2.63 2.63

F (Lever)
23 23 23 33 33 44 44

G
1.55 1.55 1.55 1.55 1.55 1.55 1.55

H
8.42 8.42 8.42 13.13 13.13 13.13 13.13

I
5 5 5 9 9 9 9

WEIGHT lbs. Gear Lever
71 76 99 115 137 160 214 33 38 61 71 93 121 175

THREE PIECE DIMENSIONS SIZE in.
6x6 8x6 8x8 10 x 6 10 x 8 10 x 10 12 x 10 12 x 12 14 x 12 14 x 14 16 x 12 16 x 14 16 x 16 18 x 16 18 x 18 20 x 16 20 x 18 20 x 20 22 x 20 22 x 22 24 x 20 24 x 22 24 x 24 26 x 26 30 x 24 30 x 26 30 x 30 36 x 30 36 x 36

RF
15.50 18 18 21 21 21 24 24 27 27 30 30 30 34 34 36 36 36 40 40 42 42 42 45 51 51 51 60 60

A

RTJ
16 18.50 18.50 21.50 21.50 21.50 24.50 24.50 27.50 27.50 30.50 30.50 30.50 34.50 34.50 36.50 36.50 36.50 40.50 40.50 42.50 42.50 42.50 45 51 51 51 60 60

RF
7.75 9 9 10.50 10.50 10.50 12 12 13.50 13.50 15 15 15 17 17 18 18 18 20 20 21 21 21 22.50 25.50 25.50 25.50 30 30

B

RTJ
8 9.25 9.25 10.75 10.75 10.75 12.25 12.25 13.75 13.75 15.25 15.25 15.25 17.25 17.25 18.25 18.25 18.25 20.25 20.25 21.25 21.25 21.25 22.50 25.50 25.50 25.50 30 30

C
8.13 8.13 9.94 8.13 9.94 11.06 11.06 12.81 12.81 14.44 12.81 14.44 16.63 16.63 18.25 16.63 18.25 20.00 20.00 20.75 20.00 20.75 23.88 27.13 23.88 27.13 30.00 30.00 34.00

D
12.37 12.37 14.06 12.37 14.06 16.28 16.28 18.03 18.03 19.65 18.03 19.65 21.34 21.34 26.21 21.34 26.21 27.96 27.96 28.71 27.96 28.71 31.84 38.06 31.84 38.06 40.93 40.93 46.68

E
15.13 15.13 18.25 16 18.25 20.50 20.50 24.25 24.25 27.25 24.25 27.25 30.63 30.63 33.69 30.63 33.69 37.13 37.13 38.50 37.13 38.50 44.63 49.75 44.63 49.75 55.38 55.38 63.63

F
3.53 3.53 3.53 3.53 3.53 4.84 4.84 4.84 4.84 4.84 4.84 4.84 4.84 4.84 3.81 4.84 3.81 3.81 3.81 3.81 3.81 3.81 3.81 9.33 3.81 9.33 9.33 9.33 11.50

G
1.71 1.71 1.71 1.71 1.71 2.18 2.18 2.18 2.18 2.19 2.18 2.19 2.19 2.19 4.90 2.19 4.90 4.90 4.90 4.90 4.90 4.90 4.90 7.48 4.90 7.48 7.48 7.48 7.48

H
10.96 10.96 10.96 10.96 10.96 17.21 17.21 17.53 17.53 17.53 17.53 17.53 20.02 20.02 20.91 20.02 23.90 20.91 20.91 20.91 20.91 20.91 20.91 24.27 20.91 24.27 24.27 24.27 29.83

I
9 9 9 9 9 12 12 12 12 12 12 12 18 18 12 18 18 12 12 12 12 12 12 12 12 12 12 12 12

WEIGHT lb.
504 573 711 665 810 1139 1297 1716 1892 2241 2132 2479 3082 3304 4607 3548 4883 5061 5503 6073 5903 6499 9017 12146 10917 13626 16684 19684 25675

* Upstream Sealing Seat Supported Design.

See General Notes After 2500.

6

TK

? CT-TK-HI/TMBV

05/07 NP-2M

PROCESS VALVES

HI-INTEGRITY TRUNNION MOUNTED BALL VALVES CLASS 300 H
F
C LEVERED L (LEVER)

F

I

G D

D

C B A B A

E

TWO PIECE DIMENSIONS SIZE in.
* 2 x 1 1/2 * * 2x2 3x2 3x3 4x3 4x4 6x4

RF
8.50 8.50 11.13 11.13 12 12 15.88

A

RTJ
9.13 9.13 11.75 11.75 12.63 12.63 16.50

RF
4 3.94 5.56 4.88 5.44 5.50 7.94

B

RTJ
4.33 4.25 5.88 5.19 5.75 5.81 8.25

C
3.25 3.25 4.13 5.25 5.25 6.25 6.25

D
7 7.63 7.63 9.12 9.12 10.06 10.06

D (Lever)
4.75 5.88 5.88 6.94 6.94 8.13 8.13

E
6.50 6.50 8.25 8.25 10 10 12.50

F
2.63 2.63 2.63 2.63 2.63 2.63 2.63

F (Lever)
23 23 23 33 33 44 44

G
1.54 1.54 1.54 1.55 1.55 1.55 1.55

H
8.42 8.42 8.42 13.13 13.13 13.13 13.13

I
5 5 5 9 9 9 9

WEIGHT lbs. Gear Lever
72 83 102 139 164 207 261 34 45 64 95 121 168 222

THREE PIECE DIMENSIONS SIZE in.
6x6 8x6 8x8 10 x 6 10 x 8 10 x 10 12 x 10 12 x 12 14 x 12 14 x 14 16 x 12 16 x 14 16 x 16 18 x 16 18 x 18 20 x 16 20 x 18 20 x 20 22 x 20 22 x 22 24 x 20 24 x 22 24 x 24 26 x 26 30 x 24 30 x 26 30 x 30 36 x 30 36 x 36

RF
15.88 19.75 19.75 22.38 22.38 22.38 25.50 25.50 30 30 33 33 33 36 36 39 39 39 43 43 45 45 45 49 55 55 55 68 68

A

RTJ
16.50 20.38 20.38 23 23 23 26.13 26.13 30.63 30.63 33.63 33.63 33.63 36.63 36.63 39.75 39.75 39.75 43.88 43.88 45.88 45.88 45.88 50 56 56 56 69.13 69.13

RF
7.94 9.88 9.88 11.19 11.19 11.19 12.75 12.75 15 15 16.50 16.50 16.50 18 18 19.50 19.50 19.50 21.50 21.50 22.50 22.50 22.50 24.50 27.50 27.50 27.50 34 34

B

RTJ
8.25 10.19 10.19 11.50 11.50 11.50 13.06 13.06 15.31 15.31 16.81 16.81 16.81 18.31 18.31 19.88 19.88 19.88 21.94 21.94 22.94 22.94 22.94 25 28 28 28 32.56 32.56

C
8.13 8.13 9.94 8.13 9.94 11.06 11.06 12.81 12.81 14.44 12.81 14.44 16.63 16.63 18.25 16.63 18.25 20.00 20.00 20.75 20.00 20.75 23.88 27.13 23.88 27.13 30.00 30.00 34.00

D
12.37 12.37 14.53 12.37 14.53 16.28 16.28 19.45 19.45 21.07 19.45 21.07 22.76 22.76 26.21 22.76 26.21 27.96 27.96 28.71 27.96 28.71 34.81 38.06 34.81 38.06 40.93 40.93 46.68

E
15.13 15.13 18.25 17.50 18.25 20.50 20.50 24.25 24.25 27.25 25.50 27.25 30.63 30.63 33.69 30.63 33.69 37.13 37.13 38.50 37.13 38.50 44.63 49.75 44.63 49.75 55.38 55.38 63.63

F
3.53 3.53 4.84 3.53 4.84 4.84 4.84 5.74 5.74 5.74 5.74 5.74 5.74 5.74 3.81 5.74 3.81 3.81 3.81 3.81 3.81 3.81 9.33 9.33 9.33 9.33 9.33 9.33 11.50

G
1.71 1.71 2.19 1.71 2.19 2.18 2.18 3.29 3.29 3.29 3.29 3.29 3.29 3.29 4.90 3.29 4.90 4.90 4.90 4.90 4.90 4.90 7.48 7.48 7.48 7.48 7.48 7.48 7.48

H
10.96 10.96 14.26 10.96 14.26 19.71 19.71 19.34 19.34 20.34 19.34 20.34 17.84 17.84 20.91 17.84 20.91 22.32 22.32 23.90 22.32 23.90 24.27 25.68 24.27 25.68 27.26 27.26 29.83

I
9 9 12 9 12 18 12 15 15 18 15 18 12 12 12 12 12 15 15 18 15 18 12 15 12 15 18 18 12

WEIGHT lb.
561 667 812 783 936 1243 1433 1918 2208 2525 2460 2801 3522 3844 4995 4218 5415 5603 6143 6699 6763 7319 9857 13228 6097 15048 18046 22306 28495

* Upstream Sealing Seat Supported Design.

See General Notes After 2500.

TK

? CT-TK-HI/TMBV

05/07 NP-2M

7

PROCESS VALVES

HI-INTEGRITY TRUNNION MOUNTED BALL VALVES CLASS 600 H
F
C LEVERED L (LEVER)

F

I

G D

D

C B A B A

E

TWO PIECE DIMENSIONS SIZE in.
2x2 3x2 3x3 4x3 4x4 6x4

RF
11.50 14 14 17 17 22

A

RTJ
11.63 11.63 14.13 14.13 17.13 17.13 22.13

RF
5.75 5.75 7 7 8.50 8.50 11

B

RTJ
5.82 5.82 7.06 7.06 8.56 8.56 11.06

C
3.25 4.03 4.03 5.25 5.25 6.25 6.25

D
7 7.63 7.63 9.12 9.12 10.06 10.06

D (Lever)
4.75 5.88 5.88 6.94 6.94 8.13 8.13

E
6.50 6.50 8.25 8.25 10.75 10.75 14

F
2.63 2.63 2.63 2.63 2.63 2.63 2.63

F (Lever)
23 23 23 33 33 44 44

G
1.54 1.54 1.54 1.54 3.13 3.13 3.13

H
8.42 8.42 8.42 14.38 14.38 14.38 14.38

I
5 5 5 12 12 12 12

WEIGHT lbs. Gear Lever
78 93 116 152 200 255 363 40 55 78 108 157 215 323

* 2 x 1 1/2 11.50

THREE PIECE DIMENSIONS SIZE in.
6x6 8x6 8x8 10 x 6 10 x 8 10 x 10 12 x 10 12 x 12 14 x 12 14 x 14 16 x 12 16 x 14 16 x 16 18 x 16 18 x 18 20 x 16 20 x 18 20 x 20 22 x 20 22 x 22 24 x 20 24 x 22 24 x 24 26 x 26 28 x 28 30 x 26 30 x 30 36 x 30 36 x 36

RF
22 26 26 31 31 31 33 33 35 35 39 39 39 43 43 47 47 47 51 51 55 55 55 57 61 65 65 82 82

A

RTJ
22.13 26.13 26.13 31.13 31.13 31.13 33.13 33.13 35.13 35.13 39.13 39.13 39.13 43.13 43.13 47.25 47.25 47.25 51.38 51.38 55.38 55.38 55.38 57.50 61.50 65.50 65.50 82.63 82.63

RF
11 13 13 15.50 15.50 15.50 16.50 16.50 17.50 17.50 19.50 19.50 19.50 21.50 21.50 23.50 23.50 23.50 25.50 25.50 27.50 27.50 27.50 28.50 30.50 32.50 32.25 41 41

B

RTJ
11.06 13.06 13.06 15.56 15.56 15.56 16.56 16.56 17.56 17.56 19.56 19.56 19.56 21.56 21.56 23.63 23.63 23.63 25.69 25.69 27.69 27.69 27.69 28.75 30.75 32.75 32.75 41.31 41.31

C
8.13 8.13 10.13 8.13 10.13 11.06 11.06 14.06 14.06 14.94 14.06 14.94 16.63 16.63 18.25 16.63 18.25 20.00 20.00 22.00 20.00 22.00 23.88 27.13 29.75 27.13 31.69 31.69 36.00

D
12.84 12.84 14.65 12.84 14.65 17.70 17.70 20.45 20.45 23.21 20.45 23.21 27.62 27.62 29.18 27.62 29.18 30.93 30.93 32.93 30.93 32.93 35.56 38.81 47.51 39.81 49.45 49.32 53.76

E
15.13 16.50 19 20 20 20.50 22 25.75 25.75 28 27 28 30.63 30.63 33.69 32 33.69 37.13 37.13 41 37.13 41 44.75 49.75 55.44 49.75 59.25 59.25 67.63

F
4.84 4.84 4.84 4.84 4.84 5.74 5.74 5.74 5.74 3.81 5.74 3.81 9.33 9.33 9.33 9.33 9.33 9.33 9.33 9.33 9.33 9.33 11.50 11.50 14.00 11.50 14.00 14.00 14.00

G
2.19 2.19 2.19 2.19 2.19 3.29 3.29 3.29 3.29 4.90 3.29 4.90 7.48 7.48 7.48 7.48 7.48 7.48 7.48 7.48 7.48 7.48 7.48 7.48 11.61 7.48 11.61 11.61 11.61

H
14.57 14.57 16.07 14.57 16.07 17.84 17.84 17.84 17.84 22.32 17.84 22.32 24.27 24.27 25.68 24.27 25.68 25.68 25.68 27.26 25.68 27.26 29.83 31.24 41.90 31.24 41.90 41.90 41.90

I
12 12 15 12 15 12 12 12 12 12 12 18 12 12 15 12 15 15 15 18 15 18 12 15 15 15 15 15 15

WEIGHT lb.
634 762 1242 1018 1500 1823 1977 2992 3162 4041 3600 4455 4520 4934 6560 5434 7060 7168 3888 10441 8568 11121 12762 17519 23595 20995 23650 27970 39976

* Upstream Sealing Seat Supported Design.

See General Notes After 2500.

8

TK

? CT-TK-HI/TMBV

05/07 NP-2M

PROCESS VALVES

HI-INTEGRITY TRUNNION MOUNTED BALL VALVES CLASS 900 H
F
C LEVERED L (LEVER)

F

I

G D

D

C B A B A

E

TWO PIECE DIMENSIONS SIZE in.
* 3/4 x 3/4 * 1x1 *1 1/2 x 1 1/2 * 2 x 1 1/2 2x2 3x2 3x3 4x3 4x4 6x4

RF
9 10 12 14.50 14.50 15 15 18 18 24

A

RTJ
9 10 12 14.63 14.63 15.13 15.13 18.13 18.13 24.13

RF
4 4 5.75 7.25 6.50 6.88 6.69 7.63 7.44 12

B

RTJ
4 4 5.75 7.31 6.56 6.93 6.75 7.68 7.50 12.06

C
4.25 4.75 4.75 5.56 5.56 6.94 6.94

D
7.32 8.25 8.25 9.12 9.12 11.12 11.12

D (Lever)
3 3.13 5.04 5.44 6.56 6.56 7.38 7.38 9.13 9.13

E
5.13 5.88 7 8.50 8.50 9.50 9.50 11.50 11.50 15

F
2.63 2.63 2.63 2.63 2.63 3.53 3.53

F (Lever)
9 9 15 23 33 33 33 33 44 44

G
1.54 1.54 1.54 1.54 1.54 1.72 1.72

H
10.30 10.30 10.30 14.38 14.38 12.21 12.21

I
9 5 5 9 9 9 9

WEIGHT lbs. Gear Lever
117 143 159 203 253 347 489 20 26 40 79 107 123 165 215 312 454

THREE PIECE DIMENSIONS SIZE in.
6x6 8x6 8x8 10 x 6 10 x 8 10 x 10 12 x 10 12 x 12 14 x 12 14 x 14 16 x 12 16 x 14 16 x 16 18 x 16 18 x 18 20 x 16 20 x 18 20 x 20 22 x 20 22 x 22 24 x 20 24 x 22 24 x 24

RF
24 29 29 33 33 33 38 38 40.50 40.50 44.50 44.50 44.50 48 48 52 52 52 56 52 61 61 61

A

RTJ
24.13 29.13 29.13 33.13 33.13 33.13 38.13 38.13 40.88 40.88 44.88 44.88 44.88 48.50 48.50 52.50 52.50 52.50 56 52 61.75 61.75 61.75

RF
12 14.50 14.50 16.50 16.50 16.50 19 19 20.25 20.25 22.25 22.25 22.25 24 24 26 26 26 28 26 30.50 30.50 30.50

B

RTJ
12.06 14.56 14.56 16.56 16.56 16.56 19.06 19.06 20.44 20.44 22.44 22.44 22.44 24.25 24.25 26.25 26.25 26.25 28 26 30.88 30.88 30.88

C
8.13 8.13 10.13 8.13 10.13 11.06 11.06 14.06 14.06 14.69 14.06 14.69 16.63 16.63 18.25 16.63 18.25 21.75 21.75 22.00 21.75 22.00 23.88

D
12.89 12.89 14.65 12.89 14.65 17.70 17.70 22.34 22.34 23.21 22.34 23.21 27.62 27.62 29.18 27.62 29.18 33.43 33.43 33.68 33.43 33.68 35.56

E
15.13 18.50 19 21.50 21.50 21.50 24 25.75 25.75 28 27.75 28 30.63 31 33.69 33.75 33.75 40.50 40.50 41 41 41 44.75

F
4.84 4.84 4.84 4.84 4.84 5.74 5.74 3.81 3.81 3.81 3.81 3.81 9.33 9.33 9.33 9.33 9.33 11.50 11.50 11.50 11.50 11.50 11.50

G
2.19 2.19 2.19 2.19 2.19 3.29 3.29 4.90 4.90 4.90 4.90 4.90 7.48 7.48 7.48 7.48 7.48 7.48 7.48 7.48 7.48 7.48 7.48

H
14.57 14.57 17.07 14.57 17.07 17.84 17.84 20.91 20.91 23.90 20.91 23.90 24.27 24.27 27.26 24.27 27.26 29.83 29.83 29.83 29.83 29.83 31.24

I
12 12 18 12 18 12 12 12 12 18 12 18 12 12 18 12 18 12 12 12 12 12 15

WEIGHT lb.
752 966 1444 1198 1708 1999 2351 3400 3584 3584 4655 3784 4875 5139 5699 7240 7720 9758 4818 5917 12138 12457 14422

* Upstream Sealing Seat Supported Design.

See General Notes After 2500.

TK

? CT-TK-HI/TMBV

05/07 NP-2M

9

PROCESS VALVES

HI-INTEGRITY TRUNNION MOUNTED BALL VALVES CLASS 1500
H F I

F
C LEVERED L (LEVER)

G D

D

C B A B A

E

TWO PIECE DIMENSIONS SIZE in.
* 3/4 x 3/4 * 1x1

RF
8.5 10 14.5 14.5 18.5 18.5 21.5

A

RTJ
8.5 10 12 14.63 14.63 18.63 18.63 21.13

RF
3.5 5.25 5.75 7.25 6.5 9.25 9.25 10.75

B

RTJ
3.5 5.25 5.75 7.31 6.56 9.32 9.32 10.75

C
4.25 4.75 4.75 5.56 5.56

D
7.32 8.25 8.25 9.12 9.12

D (Lever)
3 3.13 4.75 5.44 6.56 6.56 7.38 7.38

E
4.63 4.88 6.13 8.50 8.50 10.50 10.50 12.25

F
2.63 2.63 2.63 2.63 2.63

F (Lever)
9 9 15 23 23 23 33 33

G
1.54 1.54 1.54 1.54 1.54

H
10.30 10.30 10.30 14.69 14.69

I
9 9 9 9 9

WEIGHT lbs. Gear Lever
117 143 198 253 312 11 15 30 79 107 162 214 274

*1 1/2 x 1 1/2 12 * 2 x 1 1/2 2x2 3x2 3x3 4x3

THREE PIECE DIMENSIONS SIZE in.
4x4 6x4 6x6 8x6 8x8 10 x 8 10 x 10 12 x 10 12 x 12 14 x 12 14 x 14 16 x 14 16 x 16 18 x 16 18 x 18 20 x 16 20 x 18 20 x 20 24 x 20 24 x 24

RF
21.50 27.75 27.75 32.75 32.75 39 39 44.50 44.50 49.50 49.50 54.50 54.50 60.50 60.50 65.50 65.50 65.50 76.50 76.50

A

RTJ
21.63 28 28 33.13 33.13 39.38 39.38 45.13 45.13 50.25 50.25 55.38 55.38 61.38 61.38 66.38 66.38 66.38 77.63 77.63

RF
10.75 13.88 13.88 16.38 16.38 19.50 19.50 22.25 22.25 24.75 24.75 27.25 27.25 30.25 30.25 32.75 32.75 32.75 38.25 38.25

B

RTJ
10.81 14 14 16.56 16.56 19.69 19.69 22.56 22.56 25.13 25.13 27.69 27.69 30.69 30.69 33.19 33.19 33.19 38.81 38.81

C
6.94 6.94 9.00 9.00 10.63 10.63 13.00 13.25 14.69 14.69 16.31 16.31 18.31 18.31 23.44 18.31 23.44 24.19 24.19 29.00

D
11.12 11.12 13.78 13.79 16.57 16.96 21.46 21.46 26.12 26.12 27.18 27.18 29.18 29.18 35.12 29.18 35.12 40.95 40.95 46.76

E
12.94 15.50 16.75 19 19.63 23 24.50 26.50 27.50 29.50 29.75 32.50 33.63 36 42.75 38.75 42.75 44 46 54

F
3.52 3.52 4.84 4.84 5.74 2.37 3.81 3.81 9.33 9.33 9.33 9.33 9.33 9.33 11.50 9.33 11.50 14.00 14.00 14.00

G
1.71 1.71 2.19 2.19 3.29 3.37 4.90 4.90 7.48 7.48 7.48 7.48 7.48 7.48 7.48 7.48 7.48 11.61 11.61 11.61

H
13.78 13.78 17.07 17.07 17.84 19.66 22.32 22.32 24.27 24.27 25.68 25.68 27.26 27.26 31.24 27.26 31.24 40.49 40.49 41.90

I
12 12 18 18 12 12 15 15 12 12 15 15 18 18 15 18 15 12 12 15

WEIGHT lb.
493 697 1144 1416 1929 2439 3579 4157 5365 5925 6489 7209 8522 9502 14717 10602 15777 17340 20800 32619

* Upstream Sealing Seat Supported Design.

See General Notes After 2500.

10

TK

? CT-TK-HI/TMBV

05/07 NP-2M

PROCESS VALVES

HI-INTEGRITY TRUNNION MOUNTED BALL VALVES CLASS 2500
H F I

F
C LEVERED L (LEVER)

G D

D

C B A B A

E

TWO PIECE DIMENSIONS SIZE in.
* 3/4 x 3/4 * 1x1 2 x 1 1/2 2x2 3x2

RF
10.75 12.13 17.75 17.75 22.75

A

RTJ
10.75 12.13 15.25 17.88 17.63 23.13

RF
5.19 6.38 7.56 8.88 8.0 11.31

B

RTJ
5.19 6.38 7.56 8.94 8.06 11.43

C
9.25 5.63 5.63

D
9.385 9.94 9.94

D (Lever)
3 3.13 4.75 6.90 7.75 7.75

E
4.63 4.88 6.13 9.25 9.25 12.0

F
3.38 2.63 2.63

F (Lever)
9 9 15 33 23 23

G
1.55 1.55 1.55

H
10.30 10.30 10.30

I
5 9 9

WEIGHT lbs. Gear Lever
125 235 339 11 15 30 90 193 297

*1 1/2 x 1 1/2 15.13

THREE PIECE DIMENSIONS SIZE in.
3x3 4x3 4x4 6x4 6x6 8x6 8x8 10 x 8 10 x 10 12 x 10 12 x 12 14 x 12 14 x 14 16 x 14 16 x 16
* Upstream Sealing Seat Supported Design.

RF
22.75 26.50 26.50 36 36 40.25 40.25 50 50 56 56

A

RTJ
23 26.88 26.88 36.50 36.50 40.88 40.88 50.88 50.88 56.88 56.88

RF
11.38 13.25 13.25 18 18 20.13 20.13 25 25 28 28

B

RTJ
11.25 13.44 13.44 18.25 18.25 20.44 20.44 25.44 25.44 28.44 28.44

C
6.63 6.63 7.63 7.63 9.94 9.94 14.19 14.19 17.50 17.50 18.63

D
10.68 10.68 12.15 12.15 16.07 16.07 22.21 22.21 28.31 28.31 29.43

E
12 14 14 19 19 21.75 26 26.50 32 32 34.25

F
3.53 3.53 4.84 4.84 5.74 5.74 3.81 3.81 9.33 9.33 9.33

G
1.71 1.71 2.19 2.19 3.29 3.29 4.90 4.90 7.48 7.48 7.48

H
12.21 12.21 17.42 17.42 17.84 17.84 22.32 22.32 25.68 25.68 27.26

I
9 9 15 15 12 12 15 15 15 15 18

WEIGHT lb.
533 635 780 1252 1988 2384 4140 5260 7420 8480 10011

Available Upon Request Available Upon Request Available Upon Request Available Upon Request
See General Notes After 2500.

General Notes Concerning Dimensional Data
1. The sizes and rating shown are not exclusive. Consult any of our sales offices for additional information. 2. Dimension “A’ (End-to-End) is the same for both raised face and welding end valves. 3. Dimension “B” is measured on the body end of two piece valves and is with respect to a raised face length. 4. Dimension “C” includes flange and bolt heads. 5. Dimension “E” (Extreme Width) does not include appurtenances such as bleed plugs, drains plugs, etc. 6. Dimension “D” and “G” through “J” are for a typical gearbox. Dimension “I” includes dish in handwheel. 7. Weights are for a flanged valve and include the gearbox unless otherwise noted. 8. Dimensions shown may be revised from time-to-time. Use certified dimensional drawings in critical areas.

TK

? CT-TK-HI/TMBV

05/07 NP-2M

11

PROCESS VALVES

HI-INTEGRITY TRUNNION MOUNTED BALL VALVES GEAR TOPWORKS DATA CLASS 150-300
C L

CLOSED

K -HOLES L -C LOCATIONS L M-DIA B C N -DRILL THRU

O-DIA H-SQ KEY

C OF HANDWHEEL L

A

D

F

E

DIMENSIONS
BALL SIZE (in.)
2 x 1 1/2 2x2 3x2 4x3 6 x 4 (L) 3x3 4x3 4x4 6x4 6x6 8x6 8x8 10 x 6 10 x 8 10 x 10 12 x 10 12 x 12 14 x 12 14 x 14 16 x 12 16 x 14 16 x 16 18 x 16 18 x 18 20 x 16 20 x 18 20 x 20 22 x 20 22 x 22 24 x 20 24 x 22 24 x 24 26 x 26 30 x 24 30 x 26 30 x 30 36 x 30 36 x 36

G-1
A
0.935 1.059 1.059 1.508 1.685 1.508 1.508 1.685 1.685 1.997 1.997 1.997 1.997 1.997 2.251 2.251 2.251 2.251 2.251 2.251 2.251 2.251 2.251 3.744 2.251 3.744 3.744 3.744 3.744 3.744 3.744 3.744 4.750 3.744 4.750 4.750 4.750 5.494

D
1 15/16 2.1/16 2 1/16 3 1/8 3 1/16 3 1/8 3 1/8 3 1/16 3 1/16 2 23/32 2 23/32 2 23/32 3 1/2 2 23/32 3 11/16 3 11/16 3 11/16 3 11/16 4 5/16 3 11/16 4 5/16 4 5/16 4 5/16 5 1/2 4 5/16 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 8 1/2 5 1/2 8 1/2 8 1/2 8 1/2 10 1/2

E
3/4 3/4 3/4 1 1 1 1 1 1 1 5/16 1 5/16 1 5/16 1 5/16 1 5/16 1 11/16 1 11/16 1 11/16 1 11/16 1 3/4 1 11/16 1 3/4 1 3/4 1 3/4 1 1/2 1 3/4 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 2 1/2 1 1/2 2 1/2 2 1/2 2 1/2 3 1/4

F
1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 1 3/4 1 1 1 1 1 1 1 1 1 1 1 1 2

H
1/4 1/4 1/4 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 7/8 1/2 7/8 7/8 7/8 7/8 7/8 7/8 7/8 1 1/4 7/8 1 1/4 1 1/4 1 1/4 1 1/2

K
4 8 8 4 4 4 4 4 4 4 4 4 4 4 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

L
ON ON ON STR ON STR STR ON STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR

M
5.00 5.00 5.00 6.00 6.00 6.00 6.00 6.00 6.00 6.50 6.50 6.50 6.50 6.50 8.31 8.31 8.31 8.31 10.50 8.31 10.50 10.50 10.50 11.75 10.50 11.75 11.75 11.75 11.75 11.75 11.75 11.75 16.00 11.75 16.00 16.00 16.00 29.00

N
9/16 9/16 9/16 11/16 11/16 11/16 11/16 11/16 11/16 13/16 13/16 13/16 13/16 13/16 11/16 11/16 11/16 11/16 11/16 11/16 11/16 11/16 11/16 13/16 11/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 1 3/8

O
6.00 6.00 6.00 7.25 7.25 7.25 7.25 7.25 7.25 8.50 8.50 8.50 8.50 8.50 9.63 9.63 9.63 9.63 12.00 9.63 12.00 12.00 12.00 13.50 12.00 13.50 13.50 13.50 13.50 13.50 13.50 13.50 18.75 13.50 18.75 18.75 18.75 31.88

12

TK

? CT-TK-HI/TMBV

05/07 NP-2M

PROCESS VALVES

HI-INTEGRITY TRUNNION MOUNTED BALL VALVES GEAR TOPWORKS DATA CLASS 600
C L

CLOSED

K -HOLES L -C LOCATIONS L M-DIA B C N -DRILL THRU

O-DIA H-SQ KEY

C OF HANDWHEEL L

A

D

F

E

DIMENSIONS
BALL SIZE (in.)
2 x 1 1/2 2x2 3x2 3x3 4x3 4x4 6x4 6x6 8x6 8x8 10 x 6 10 x 8 10 x 10 12 x 10 12 x 12 14 x 12 14 x 14 16 x 12 16 x 14 16 x 16 18 x 16 18 x 18 20 x 16 20 x 18 20 x 20 22 x 20 22 x 22 24 x 20 24 x 22 24 x 24 26 x 26 28 x 28 30 x 26 30 x 30 36 x 30 36 x 36

G-2
A
0.935 1.059 1.059 1.508 1.508 1.685 1.685 1.997 1.997 1.997 1.997 1.997 2.251 2.251 2.251 2.251 3.244 2.251 3.244 3.744 3.744 3.744 3.744 3.744 3.744 3.744 3.744 3.744 3.744 3.744 4.750 5.494 5.494 5.994 5.994 5.994

D
1 15/16 2.1/16 2 1/16 3 1/8 3 1/8 3 1/16 3 1/16 2 23/32 2 23/32 3 11/16 3 1/2 3 11/16 3 11/16 3 11/16 3 11/16 3 11/16 5 7/16 3 11/16 5 7/16 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 8 1/2 10 10 3/8 11 1/2 11 1/2 10

E
3/4 3/4 3/4 1 1 1 1 1 5/16 1 5/16 1 1 5/16 1 1 11/16 1 11/16 1 11/16 1 11/16 1 1/2 1 11/16 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 2 1/2 3 1/4 3 1/4 2 1/2 2 1/2 2 1/2

F
1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 3/4 1/2 3/4 3/4 3/4 3/4 3/4 1 3/4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1/4 1 1/4 2 2 2

H
1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 7/8 1/2 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2

K
4 4 4 4 4 4 4 4 4 8 4 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

L
STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR

M
5.00 5.00 5.00 6.00 6.00 6.00 6.00 6.50 6.50 8.31 6.50 8.31 8.31 8.31 8.31 8.31 11.75 8.31 11.75 11.75 11.75 11.75 11.75 11.75 11.75 11.75 11.75 11.75 11.75 11.75 16.00 23.00 23.00 29.00 29.00 29.00

N
9/16 9/16 9/16 11/16 11/16 11/16 11/16 13/16 13/16 11/16 13/16 11/16 11/16 11/16 11/16 11/16 13/16 11/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8

O
6.00 6.00 6.00 7.25 7.25 7.25 7.25 8.50 8.50 9.63 8.50 9.63 9.63 9.63 9.63 9.63 13.50 9.63 13.50 13.50 13.50 13.50 13.50 13.50 13.50 13.50 13.50 13.50 13.50 13.50 18.75 29.69 29.69 31.88 31.88 31.88

TK

? CT-TK-HI/TMBV

05/07 NP-2M

13

PROCESS VALVES

HI-INTEGRITY TRUNNION MOUNTED BALL VALVES GEAR TOPWORKS DATA CLASS 900
CLOSED
K -HOLES L -C LOCATIONS L M-DIA B C N -DRILL THRU

C L

O-DIA H-SQ KEY

C OF HANDWHEEL L

A

D

F

E

DIMENSIONS
BALL SIZE (in.)
1 1/2 x 1 1/2 2 x 1 1/2 2x2 3x2 3x3 4x3 4x4 6x4 6x6 8x6 8x8 10 x 6 10 x 8 10 x 10 12 x 10 12 x 12 14 x 12 14 x 14 16 x 12 16 x 14 16 x 16 18 x 16 18 x 18 20 x 16 20 x 18 20 x 20 22 x 20 22 x 22 24 x 20 24 x 22 24 x 24

G-3
A
1.059 1.059 1.184 1.184 1.508 1.508 1.685 1.685 1.997 1.997 1.997 1.997 1.997 2.251 2.251 3.244 3.244 3.244 3.224 3.244 3.744 3.744 3.744 3.744 3.744 3.744 3.744 3.744 3.744 3.744 3.744

D
2 2 1 11/16 1 11/16 3 1/8 3 1/8 2 23/32 2 23/32 2 23/32 2 23/32 3 11/16 3 1/2 3 11/16 3 11/16 3 11/16 5 1/2 5 1/2 5 7/16 5 1/2 5 7/16 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2

E
3/4 3/4 15/16 15/16 3/4 3/4 1 1/4 1 1/4 1 5/16 1 5/16 1 1 5/16 1 1 11/16 1 11/16 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2

F
1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 3/4 1/2 3/4 3/4 3/4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

H
1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8

K
8 8 4 4 4 4 4 4 4 4 8 4 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

L
ON ON STR STR ON ON STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR

M
5.00 5.00 5.00 5.00 6.00 6.00 6.50 6.50 6.50 6.50 8.31 6.50 8.31 8.31 8.31 11.75 11.75 11.75 11/75 11.75 11.75 11.75 11.75 11.75 11.75 11.75 11.75 11.75 11.75 11.75 11.75

N
9/16 9/16 9/16 9/16 11/16 11/16 13/16 13/16 13/16 13/16 11/16 13/16 11/16 11/16 11/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16

O
6.00 6.00 6.00 6.00 7.25 7.25 8.50 8.50 8.50 8.50 9.63 8.50 9.63 9.63 9.63 13.50 13.50 13.50 13.50 13.50 13.50 13.50 13.50 13.50 13.50 13.50 13.50 13.50 13.50 13.50 13.50

14

TK

? CT-TK-HI/TMBV

05/07 NP-2M

PROCESS VALVES

HI-INTEGRITY TRUNNION MOUNTED BALL VALVES GEAR TOPWORKS DATA CLASS 1500
CLOSED
K -HOLES L -C LOCATIONS L M-DIA B C N -DRILL THRU

C L

O-DIA H-SQ KEY

C OF HANDWHEEL L

A

D

F

E

DIMENSIONS
BALL SIZE (in.)
1 1/2 x 1 1/2 2 x 1 1/2 2x2 3x2 3x3 4x3 4x4 6x4 6x6 8x6 8x8 10 x 8 10 x 10 12 x 10 12 x 12 14 x 12 14 x 14 16 x 14 16 x 16 18 x 16 18 x 18 20 x 16 20 x 18 20 x 20 24 x 20 24 x 24

G-4
A
1.059 1.059 1.184 1.184 1.508 1.508 1.685 1.685 1.997 1.997 2.251 2.251 3.244 3.244 3.244 3.244 3.744 3.744 3.744 3.744 4.750 3.744 4.750 4.750 4.750 5.494

D
2 2 1 11/16 1 11/16 3 1/8 3 1/8 2 23/32 2 23/32 3 11/16 3 11/16 3 11/16 3 11/16 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2 8 1/2 5 1/2 8 1/2 8 1/2 8 1/2 10

E
3/4 3/4 15/16 15/16 3/4 3/4 1 1/4 1 1/4 1 3/8 1 3/8 1 1 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 2 1/2 1 1/2 2 1/2 2 1/2 2 1/2 2 1/2

F
1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 5/8 5/8 3/4 3/4 1 1 1 1 1 1 1 1 1 1 1 1 1 2

H
1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 1 1/4 7/8 1 1/4 1 1/4 1 1/4 1 1/2

K
8 8 4 4 4 4 4 4 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8

L
ON ON STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR STR

M
5.00 5.00 5.00 5.00 6.00 6.00 6.50 6.50 8.31 8.31 8.31 8.31 11.75 11.75 11.75 11.75 11.75 11.75 11.75 11.75 16.00 11.75 16.00 16.00 16.00 29.00

N
9/16 9/16 9/16 9/16 11/16 11/16 13/16 13/16 11/16 11/16 11/16 11/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 1 3/8

O
6.00 6.00 6.00 6.00 7.25 7.25 8.50 8.50 9.63 9.63 9.63 9.63 13.50 13.50 13.50 13.50 13.50 13.50 13.50 13.50 18.75 13.50 18.75 18.75 18.75 31.88

TK

? CT-TK-HI/TMBV

05/07 NP-2M

15

PROCESS VALVES

HI-INTEGRITY TRUNNION MOUNTED BALL VALVES GEAR TOPWORKS DATA CLASS 2500
CLOSED
K -HOLES L -C LOCATIONS L M-DIA B C N -DRILL THRU

C L

O-DIA H-SQ KEY

C OF HANDWHEEL L

A

D

F

E

DIMENSIONS
BALL SIZE (in.)
1 1/2 x 1 1/2

G-5
A
1.375 1.502 1.502 1.508 1.508 1.997 1.997 1.997 1.997 1.997 1.997 3.244 3.244 3.744 3.744 3.744

D
2 2 13/16 2 13/16 2 23/32 2 23/32 2 23/32 2 23/32 3 11/16 3 11/16 3 11/16 3 11/16 5 1/2 5 1/2 5 1/2 5 1/2 5 1/2

E
1 1/8 1 1/2 1 1/2 1 1/4 1 1/4 1 1/4 1 1/4 1 3/8 1 3/8 1 3/8 1 3/8 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2

F
1/2 1/2 1/2 1/2 1/2 1/2 1/2 5/8 5/8 5/8 5/8 1 1 1 1 1

H
3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 7/8 7/8 7/8 7/8 7/8

K
4 4 4 4 4 4 4 8 8 8 8 8 8 8 8 8

L
STR ON ON STR STR STR STR STR STR STR STR STR STR STR STR STR

M
5.25 6.00 6.00 6.50 6.50 6.50 6.50 8.31 8.31 8.31 8.31 11.75 11.75 11.75 11.75 11.75

N
9/16 11/16 11/16 13/16 13/16 13/16 13/16 11/16 11/16 11/16 11/16 13/16 13/16 13/16 13/16 13/16

O
6.00 7.25 7.25 8.50 8.50 8.50 8.50 9.63 9.63 9.63 9.63 13.50 13.50 13.50 13.50 13.50

2x2 3x2 3x3 4x3 4x4 6x4 6x6 6 x 6 (M) 8x6 8 x 6 (M) 8x8 10 x 8 10 x 10 12 x 10 12 x 12 14 x 12 14 x 14 16 x 14 16 x 16

See Engineering for Dimensions See Engineering for Dimensions See Engineering for Dimensions See Engineering for Dimensions

16

TK

? CT-TK-HI/TMBV

05/07 NP-2M

PROCESS VALVES

HI-INTEGRITY TRUNNION MOUNTED BALL VALVES API 2000, 3000 & 5000

H

F

I

F
C LEVERED L (LEVER)

G D

D

C B A B A

E

API 2000 DIMENSIONS
SIZE in.
2 1/16 3 1/8 4 1/16 6

2000 psi WP B C RTJ
5 13/16 6 3/4 8 9/16 11 1/16 4 5 1/4 6 1/4 8 1/8 7.63 9.12 10.06 13.67

4000 psi TEST E
6 1/2 10 3/4 10 3/4 15 1/8

A RF
11 1/2 15 17 24

D

RTJ
11 5/8 14 1/8 17 1/8 22 1/8

RF
5 3/4 6 11/16 8 1/2 12

D (Lever)
5 7/8 6.94 8 1/8 -

F
2.63 2.63 2.63 6.06

F (Lever)
23 33 44 -

G
1.54 1.55 1.55 3.01

H
8.42 14.38 14.38 17.75

I
5 12 12 18

WEIGHT lbs. Gear Lever
93 200 255 752 55 157 215 -

API 3000 DIMENSIONS
SIZE in.
2 1/16 3 1/8 4 1/16 6

3000 psi WP B C RTJ
6.56 7.25 7.5 12.06 4.88 6 6.94 9 9.94 9.12 11.12 15.20

6000 psi TEST E
8.5 9.5 11.5 16.75

A RF
14 1/2 15 18 24

D

RTJ
14 5/8 15 5/8 18 1/8 24 1/8

RF
6.5 7.19 7.44 12

D (Lever)
7 3/4 7 -

F
2.63 2.63 3.53 5.74

F (Lever)
33 33 -

G
1.55 1.55 1.72 3.29

H
10.30 14.38 12.21 20.34

I
12 12 12 18

WEIGHT lbs. Gear Lever
168 217 397 1044 107 194 -

API 5000 DIMENSIONS
SIZE in.
2 1/16 3 1/8 4 1/16 6

5000 psi WP B C RTJ
6 9/16 8 1/4 4 7/8 7 1/8 7 5/8 9.88 9.94 10.68 12.15 16.07

7500 psi TEST E
8 1/2 11 14 18 7/8

A RF
18 1/2 21 1/2 -

D

RTJ
14 5/8 18 5/8 21 5/8 28

RF
8 1/8

D (Lever)
7 9 15/16 -

F
2.63 3.53 4.84 5.74

F (Lever)
33 33 -

G
1.55 1.71 2.19 3.29

H
10.30 12.21 15.76 17.84

I
12 12 12 12

WEIGHT lbs. Gear Lever
235 382 630 1470 115 295 -

10 11/16 10 13/16 14

TK

? CT-TK-HI/TMBV

05/07 NP-2M

17

PROCESS VALVES

HI-INTEGRITY TRUNNION MOUNTED BALL VALVES API 2000, 3000 & 5000 TOPWORKS DATA
C L

CLOSED

K -HOLES L -C LOCATIONS L M-DIA B C N -DRILL THRU

O-DIA H-SQ KEY

C OF HANDWHEEL L

A

D

F E

API 2000 DIMENSIONS
SIZE in.
2 1/16 3 1/8 4 1/16 6

A
1.502 1.508 1.685 1.997

D
4 7/16 6 1/4 6 1/2 8 11/16

E
3 1/2 3 9/32 3 13/32 3 15/32

F
1/2 1/2 1/2 1/2

H
1/4 3/8 3/8 1/2

K
4 4 4 4

L
ON STR STR STR

M
6 6 6 1/2 6 1/2

N
11/16 11/16 11/16 13/16

O
7 1/4 7 1/4 8 1/2 8 1/2

API 3000 DIMENSIONS
SIZE in.
2 1/16 3 1/8 4 1/16 6

A
1.502 1.508 1.685 1.997

D
5 1/16 6 1/4 6 1/2 8 5/8

E
15/16 1 1 1/4 1 3/8

F
1/2 1/2 1/2 5/8

H
3/8 3/8 3/8 1/2

K
4 4 4 8

L
ON STR STR STR

M
6 6 1/2 6 1/2 8 5/16

N
11/16 11/16 11/16 11/16

O
7 1/4 7 1/4 8 1/2 9 5/8

API 5000 DIMENSIONS
SIZE in.
2 1/16 3 1/8 4 1/16 6

A
1.502 1.508 1.997 1.997

D
5 5/8 7 1/2 8 10 1/2

E
1 1/2 1 1/4 1 1/4 1 3/8

F
1/2 1/2 1/2 5/8

H
3/8 3/8 1/2 1/2

K
4 4 4 8

L
ON STR STR STR

M
6 6 1/2 6 1/2 8 5/16

N
11/16 13/16 13/16 11/16

O
7 1/4 8 1/2 8 1/2 9 5/8

VALVE BORES
When fully open, TK Ball Valves present an unobstructed flow path identical to the same length of straight pipe. Both sizes are in accordance with API and ASME Specifications, which are as follows:
Nominal Bore in. (mm)
1/2 3/4 1 1 1/4 1 1/2 2 3 4 6 8 10 12 14 16 18 20 22 24 26 28 30 36 (15) (20) (25) (30) (40) (50) (75) (100) (150) (200) (250) (300) (350) (400) (450) (500) (550) (600) (650) (700) (750) (900)

ASME Class 150 -1500 Actual Bore
0.500 0.750 1.000 1.250 1.500 2.000 3.000 4.000 6.000 8.000 10.000 12.000 13.250 15.250 17.250 19.250 21.250 23.250 25.000 27.000 29.000 34.500 (12.7) (19.1) (25.4) (31.8) (38.1) (50.8) (76.2) (101.6) (152.4) (203.2) (254.0) (304.8) (336.6) (387.4) (438.2) (489.0) (538.8) (590.1) (635.0) (685.8) (736.6) (876.3)

ASME Class 2500 Actual Bore
0.500 0.750 0.781 1.000 1.250 2.000 3.000 4.000 5.250 7.125 8.875 10.500 (12.7) (19.1) (19.8) (25.4) (31.8) (50.8) (76.2) (101.6) (133.4) (180.9) (225.4) (266.7) -

API 2000 - 5000 Actual Bore
2.062 3.125 4.062 6.000 (52.4) (79.4) (103.3) (152.4) -

18

TK

? CT-TK-HI/TMBV

05/07 NP-2M

PROCESS VALVES

HI-INTEGRITY TRUNNION MOUNTED BALL VALVES SPECIAL FLANGE BOLTING FOR CERTAIN VALVES
ASME CLASS 150 RAISED FACE VALVES
Valve Size in.
1/2 3/4 1 1 1/4 1 1/2 2 x 1 1/2 2x2 3x2 3x3 4x4 6x4

Stud Bolt Size
1/2 - 13 x 1 3/4 1/2 - 13 x 1 3/4 1/2 - 13 x 2 1/2 - 13 x 2 1/2 - 13 x 2 5/8 - 11 x 2 1/4 5/8 - 11 x 2 1/4 5/8 - 11 x 2 1/2 5/8 - 11 x 2 1/2 5/8 - 11 x 2 1/2 3/4 - 10 x 2 3/4

Cap Screw Size
1/2 - 13 x 1 1/4 1/2 - 13 x 1 1/4 1/2 - 13 x 1 1/4 1/2 - 13 x 1 1/4 1/2 - 13 x 1 1/2 5/8 - 11 x 1 1/2 5/8 - 11 x 1 1/2 5/8 - 11 x 1 3/4 5/8 - 11 x 1 3/4 5/8 - 11 x 1 3/4 3/4 - 10 x 2

Quantity
4 4 4 4 4 4 4 4 4 8 8

Space limitations prohibit the use of through stud bolts on one end of the smaller ASME Class150 valves. These valves have one end drilled and tapped to accept a shorter-thanstandard bolt or a cap screw. Stud bolt and cap screw sizes listed below are for information purpose only and are not furnished with the valves. The use of stud bolts is preferred.

FLOW COEFFICIENTS (CV)
(Flow coefficient, or CV , by definition, is the volume of water in gallons per minute at 60°F that will flow through a given element with a pressure drop of 1 psi)
SIZE in.
1/2 3/4 1 1 1/4 1 1/2 2 x 1 1/2 2x2 3x2 3x3 4x3 4x4 6x4 6x6 8x6 10 x 6 8x8 10 x 8 12 x 8 10 x 10 12 x 10 12 x 12 14 x 12 16 x 12 14 x 14 16 x 14 16 x 16 18 x 16 20 x 16 18 x 18 20 x 18 20 x 20 24 x 20 22 x 22 24 x 24 30 x 24 26 x 26 30 x 26 28 x 28 30 x 30 36 x 30 36 x 36

ASME/ANSI CLASS

150
16 44 90 153 227 125 463 183 1247 504 2489 735 5458 2022 1458 10721 4183 2941 17756 7342 26714 14080 9031 32609 14785 44627 20841 14843 57799 28064 74763 26734 91770 113221 35617 132159 51377 154783 182779 63626 264986

300
14 38 78 136 211 125 420 183 1057 504 2156 734 5393 2021 1458 10235 4181 2940 17202 7338 25917 14043 9027 30936 14765 42550 20821 14837 56171 28023 71830 26720 88511 109382 35604 126650 51337 148828 176007 63565 248911

600
12 34 69 120 187 125 361 183 943 502 1811 734 4581 2018 1457 8920 4169 2939 14614 7316 22782 13984 9017 28641 14725 39141 20752 14820 51396 27914 65432 26676 81273 98940 35571 117426 51238 138726 161903 63458 226668

900
11 31 63 113 167 124 322 183 911 502 1760 733 4386 2016 1457 8446 4166 2938 14164 7302 21230 13924 9009 26625 14688 36642 20703 14810 48645 27847 62207 26650 93948 -

1500
11 30 63 113 167 124 322 182 820 501 1610 733 4079 2014 1457 7978 4158 2937 13029 7283 19619 13814 8994 24083 14622 33110 20582 14783 43329 27667 55426 26582 83892 -

2500
10 29 27 54 92 291 182 739 500 1450 732 2528 1485 1099 5301 3307 2385 8431 5933 12348 -

TK

? CT-TK-HI/TMBV

05/07 NP-2M

19

PROCESS VALVES

TRADEMARK INFORMATION
TK? is a registered trademark which is owned by Cameron.

Trademark
INCONEL MONEL TEFLON VITON

Owner
INCO Nickel Sales, Inc. INCO Alloys International, Inc. E.I. DuPont De Nemours & Company E.I. DuPont De Nemours & Company

20

TK

? CT-TK-HI/TMBV

05/07 NP-2M

PROCESS VALVES

PROCESS VALVES

VALVES & MEASUREMENT 3250 Briarpark Drive, Suite 300 Houston, Texas 77042 USA Toll Free 800 323 9160
For the most current contact and location information go to: www.c-a-m.com

Printed in Canada 05/07-NP-2M CT-TK-HI/TMBV


相关文章:
各类阀门型号大全
10 .客户应根据本样本所列的阀门型号规格选用。另有特殊要求时,应详细加以说明...球阀 公称压力数值 阀体材料代号 2.类型代号用汉语拼音字母表示,按表 1 的规定...
VTI阀门样本
VTI阀门样本_机械/仪表_工程科技_专业资料。今日推荐 88份文档 2014...1.意大利Dafram 球阀介绍... 56页 免费 哈锅阀门样本 190页 免费 VTI阀门技术...
水利阀样本
水利阀样本_法律资料_人文社科_专业资料。按需要选择(封面) 水利水电专用阀门 (配产品图片) 河南黑马实业有限公司 水利水电专用 液压移动双密封球阀 (配斜分、正分...
BO球阀和压力表该样本事情-150908
BO球阀和压力表该样本事情-150908_机械/仪表_工程科技_专业资料。欧阳经理: 因为改样本,造成了以下投诉: 1.SS-0606-XXXX-Y-Z0-NR1 请参考图纸,就这个项目客户...
阀门构造图
球阀) (一、上图为全焊接式 cameron 球阀) 二、简洁可靠的结构 ?主要原件均为锻造 ?最简洁的结构-只有 12 个部件,高可靠性 ?无柱型弹簧-不会产生弹簧失效 ...
管线球阀讲义
(a)美国 Cameron 公司 (b)日本 TIX 公司 图(一) 全焊接球形阀体管线球阀 (a)美国 PBV 公司 (b)B.F.E 公司 图(二) 筒状阀体管线球阀 美国 Cameron ...
球阀的安装和维修指南
Cameron B8球阀安装和维... 14页 1下载券 CAMERON手动球阀操作规程... 3页 ...球阀的安装和维修指南一、球阀的安装 1、球阀前后管线已准备好。前后管道应同轴...
电动阀门样本,功率,规格
电动阀门样本,功率,规格_电子/电路_工程科技_专业资料。电动阀门 样本 功率 (!))/ff 穴 1 2008 1 中文版| 目 录 1 2 3 4 5 6 7 8 9 10 11 12 ...
阀门设计流程
8页 免费 cameron+井口介绍 27页 免费 阀门检验与管理规程 8页 免费 阀门制造工艺流程 14页 7下载券阀​门​设​计​流​程 ...
阀门压力等级对照表
(阀门类型代号)类型闸阀 截止阀 代号 Z J 类型球阀蝶阀代号 Q D 类型 旋塞...10.客户应根据本样本所列的阀门型号规格选用。另有特殊要求时,应详细加以 说明...
更多相关标签:
球阀样本 | valbart球阀样本 | ckd电动式球阀 样本 | 电动球阀功率样本 | 手动球阀样本 | 气动切断球阀样本 | cameron | 安龙cameron妻子 |